• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.220-224
• /
• 2009

The authors have investigated the acoustic field analysis using the Constrained Interpolation Profile(CIP) Method recently proposed by Yabe. The present study has examined the calculation accuracy of the three-dimensional (3-D) acoustic field analysis using the type-M CIP method. In this paper we show phase error of type-M CIP method and the dependence on the wave-propagation direction in the type-M CIP acoustic field analysis, and then demonstrate that it is effective for acoustic field analysis, compared with the FDTD and the exact solution. We show the dependency on the propagation angle in the CIP acoustic field analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.565-570
• /
• 2001

대상 기계구조물의 유한요소 모델로부터 구한 해석결과가 실험결과와 오차를 나타낼 때, 이러한 오차를 줄일 수 있도록 유한요소 모델의 변경이 요구된다. 유한요소 모델개선은 이러한 역문제(Inverse Problem)를 다루는 체계적인 접근법이다. 일반적으로 유한요소 모델에서 변경할 수 있는 매개변수의 개수는 실험결과의 개수보다 많으므로 실험결과와 일치되는 개선된 유한요소 모델은 무한하다고 할 수 있다. 그러나, 개선된 유한요소 모델이 물리적 타당성을 갖도록 매개변수의 변경량에 제한을 주면 일반적으로 초기 유한요소 모델에 비해 실험결과와의 오차가 개선된 근사해만 존재하게 된다. 따라서, 모델개선 과정을 통해 구한 개선된 모델은 오차의 평가기준 또는 목적함수에 따라 정해진 다양한 근사해 중 하나이다. 기존의 모델개선 방법에서는 단 하나의 오차 평가기준 또는 목적함수를 사용하고 이를 최소화 하는 모델을 구한다. 개선된 모델을 구하기 이전에는 사용된 평가기준이 타당한지 검토할 수 없으므로 대부분의 경우, 시행착오법으로 목적함수를 설정하게 된다. 본 논문에서는 다목적 최적화 기법을 이용한 오차 평가기준을 소개하고 이를 하드디스크커버 유한요소 모델개선에 응용한다.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.359-365
• /
• 2006

Wave-front error(WFE) is the main parameter that determines the optical performance of the opto-mechanical system. In the development of opto-mechanics, WFE due to the main loading conditions are set to the important specifications. The deformation of the optical surface can be exactly calculated thanks to the evolution of numerical methods such as the finite element method(FEM). To calculate WFE from the deformation results of FEM, another approximation of the optical surface deformation is required. It needs to construct additional grid or element mesh. To construct additional mesh is troublesomeand leads to transformation error. In this work, the moving least-squares approximation is used to reconstruct wave front error It has the advantage of accurate approximation with only nodal data. There is no need to construct additional mesh for approximation. The proposed method is applied to the examples of GOCI scan mirror in various loading conditions. The validity is demonstrated through examples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.157-162
• /
• 2015

A large five-axis gantry-type machine performs cutting operations by moving the gantry, along with a bed. During operation, there are three sources of position (zig-zag) errors: 1) the position difference between two control motors on the X axis, 2) friction difference from the different column weights, and 3) torque of the rotating spindle. This study improved the performance of a gantry-type machine by analyzing these three error sources. We changed the mass of a column in the gantry structure and measured the effect on the friction result. We also studied the spindle torque influences on the movement performance of the gantry in relation to the spindle rotation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6464-6471
• /
• 2014

The UV curing method is a popular process for lens molding on a unit wafer. This process, however, has several drawbacks including wafer adhesion during the ejection process after curing, errors in lens shape and wafer warpage due to material shrinkage during the curing process, and lens centering errors on both sides of a wafer. Among these, the lens shape error and warpage are influenced directly by the UV curing process due to factors including the UV radiation uniformity, the degree of cure according to UV intensity, and the shrinkage characteristics of the material. Therefore, a theory is needed not only to understand the change in the material characteristics, such as the shrinkage rate due to the curing reaction, but also to establish a model. In addition, an analysis system is needed to realize the model. This study proposes a new analysis method for the wafer lens molding process by Comsol modeling. This method was verified by comparing the results with those of the actual process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.681-688
• /
• 2000

In this paper, a planar antenna that is small and light, is designed and analyzed aiming handset antenna of IMT-2000. Employing the Ensemble simulator based on a MoM, design-parameters are found to determine a resonant frequency. Therefore, it is analyzed with the Ensemble simulation and FDTD numerical for resonating at the allocated frequency for IMT-2000 in the fixed antenna dimension of 21$^{\circ}$wing angle that is a design parameter. Analyzing with FDTD method, Though the results of FDTD are very exact, this analysis introduces errors due to the staircasing approximation in the slope of bowtie. To reduce this error, it is divided to 4-ranges where the cell contains the boundary of perfect conductor/free space. Then, each range is calculated by different by different equation, which modify the H-field to add the component of the area and length of the cell filled with free space. Therefore, the modified FDTD algorithm provided with a narrow bandwidth of return loss calculated with a standard FDTD algorithm that can be extended to the desired ranges.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.15-20
• /
• 1996

이 논문에서는 육방형 노심 해석용으로 제작된 코드인 HEXFEM의 연소계산 결과의 정확성을 VVER-1000 연소계산 벤치마크 문제를 통하여 검증하였으며 집합체내 연소도 구배효과에 따른 오차를 분석하였다. 집합체내 연소도 구배효과를 고려했을 때 집합체내 균일한 연소도를 가정했을 때보다 오차가 현저히 감소하였으며 Cubic Option의 결과는 제어봉이 삽입된 1주기초(BOC1 ARI), 1주기초(BOC1), 1주기말(EOC1), 2주기초(BOC2)에 대해 집합체별 상대출력 오차가 최대 0,4%로 매우 정확한 결과를 얻었고 Quadratic Option외 결과도 최대 2.0%로 비교적 정확한 결과를 얻었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.14-19
• /
• 2010

In this paper, an efficient algorithm is developed to perform target rotational motion compensation to achieve the clear inverse synthetic aperture radar(ISAR) image. The algorithm is based on a time-frequency technique. This algorithm provides an efficient method to resolve the blurring image caused by the time-varying behavior of the target scattering centers and leads to a well-focused ISAR image. Results demonstrate that the time-frequency techniques can improve the blurring ISAR image when an aircraft is in complex motion, such as maneuvering, rotation and acceleration.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.155-160
• /
• 2017

A cabin of the agricultural tractor is designed to protect the driver from vibration transmitted due to the irregular ground and overturning of the tractor. The cabin is usually manufactured by welding frames and plates. Consequently, the welded state of the frame and plate affects the stiffness of the cabin structure. In this paper, the static and dynamic stiffness characteristics of the cabin are identified through finite element analysis and effects of the structure production error are investigated to insure the structural stiffness of the cabin.

• Water for future
• /
• v.22 no.3
• /
• pp.315-322
• /
• 1989

The effects of open boundary conditions including the radiation condition are compared by utilizing the $L^{2_}$-norm and RMS error in the numerical modeling of ocean problem. In numerical tests of $M_2$ tide, grid size and bed roughness are considered and analyzed. For the $M_2$ tide test in a simplified bay where the analytical solutions are available, it is found that improved radiating boundary condition(IMPSOM) may increase the reliability of computed results by 40% of $L^{2_}$-norm and 96% of RMS error than the open boundary condition without radiation effect. In case of using the half-size grids, better results are obtained. It is also found that the IMPSOM is applicable with satisfaction when the bottom friction is included.