• Journal of Korea Water Resources Association
• /
• v.54 no.8
• /
• pp.629-641
• /
• 2021

In this study, a two-dimensional numerical model (Nays2DH) was applied to analyze the process of morphological changes in the river channel bed depending on the changes in the amount of flooding after fully opening the Sejong weir, which was constructed upstream of the Geum River. For this, numerical simulations were performed by assuming the flow conditions, such as a non-uniform flow (NF), unsteady flows (single flood event, SF), and a continuous flood event (CF). Here, in the cases of the SF and CF, the normalized hydrograph was calculated from real flood events, and then the hydrograph was reconfigured by the peak flow discharge according to the scenario, and then it was employed as the flow discharge at the upstream boundary condition. In this study, to quantitatively evaluate the morphological changes, we analyzed the time changes in the bed deformation the bed relief index (BRI), and we compared the aerial photographs of the study area and the numerical simulation results. As simulation results of the NF, when the steady flow discharge increases, the ratio of lower width to depth decreases and the speed of bar migration increases. The BRI initially increases, but the amount of change decreased with time. In addition, when the steady flow discharge increases, the BRI increased. In the case of SF, the speed of bar migration decreased with the change of the flow discharge. In terms of the morphological response to the peak flood discharge, the time lag also indicated. In other words, in the SF, the change of channel bed indicates a phase lag with respect to the hydraulic condition. In the result of numerical simulation of CF, the speed of bar migration depending on the peak flood discharges decreased exponentially despite the repeated flood occurrences. In addition, as in the result of SF, the phase lag indicated, and the speed of bar migration decreased exponentially. The BRI increased with time changes, but the rate of increase in the BRI was modest despite the continuous peak flooding. Through this study, the morphological changes based on the hydrological characteristics of the river were analyzed numerically, and the methodology suggested that a quantitative prediction for the river bed change according to the flow characteristic can be applied to the field.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.63-70
• /
• 2009

3D GIS(Geographic Information System) processes, analyzes and presents various real-world 3D phenomena by building 3D spatial information of real-world terrain, facilities, etc., and working with visualization technique such as VR(Virtual Reality). It can be applied to such areas as urban management system, traffic information system, environment management system, disaster management system, ocean management system, etc,. In this paper, we propose video visualization technology based on 3D geographic information to provide effectively real-time information in 3D geographic information system and also present methods for establishing 3D building information data. The proposed video visualization system can provide real-time video information based on 3D geographic information by projecting real-time video stream from network video camera onto 3D geographic objects and applying texture-mapping of video frames onto terrain, facilities, etc.. In this paper, we developed sem i-automatic DBM(Digital Building Model) building technique using both aerial im age and LiDAR data for 3D Projective Texture Mapping. 3D geographic information system currently provide static visualization information and the proposed method can replace previous static visualization information with real video information. The proposed method can be used in location-based decision-making system by providing real-time visualization information, and moreover, it can be used to provide intelligent context-aware service based on geographic information.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2020

Accident prevention is more important than follow-up, which is based on Heinrich's law. The marine incident system is a very meaningful system that can prevent similar accidents, and was introduced in 2010 in Korea in accordance with the enforcement of the Code for the Investigation of Marine Casualties and Incidents (CI Code). Based on the CI Code, ship owners or ship operators are required to notify the Central Chief Inspector using the designated notification form in the event of a marine incident, but the number of voluntary notifications is still small. In this regard, this study intends to provide a direction for improvement by conducting an in-depth analysis focusing on the lack of notification procedures and forms of the marine incident system. To this end, we analyzed related regulations, cases of excellent overseas shipping countries such as the United Kingdom and Singapore, cases of similar domestic transportation systems such as aviation and railways, and marine incident notification procedures and forms of leading shipping companies. Major improvements in the notification process include the transition of the marine incidents to voluntary reporting, the expansion of the reporting subjects, and the identification of the security of the informer's identity. The main contents of the notification form revision include the use of the term "reporting" instead of "notification," the content of the identity guarantee in the notification form, and the increase in statistical value through the expansion of optional entries.

• Journal of the Korean Geographical Society
• /
• v.43 no.4
• /
• pp.544-560
• /
• 2008

This study seeks to clarify the background and factors for the expansion of bus networks that connect Incheon International Airport with its hinterlands. For this research objective, this paper analyzes the relationships among the change of bus routes, competitive transportation modes, passenger fares, and the shortest time distance. Previously, the hinterlands of route bus networks that connect Gimpo International Airport were Seoul metropolitan area, Chungcheong region, Jeonju and Iksan in Jeollabuk-do(province). However, the opening of Incheon International Airport resulted in the expansion of the hinterlands of bus networks to Gangwon-do, Gwangju, and major cities in Youngnam region. Simultaneously, route bus networks also expanded in Seoul metropolitan area. Each bus route connecting Incheon International Airport with its hinterlands was opened by a single bus company or various bus companies. In many cases, due to the uncertainty of revenues or bus company's regional ties, a bus route was opened by various bus companies. In this paper, the analysis of the number of one-way route bus service and density of flight passengers shows that the frequency of the route bus service for Seoul except Gangseo-gu(ward) and for Seoul's satellite cities(Suwon, Seongnam, Anyang, Gunpo, Guri, and Osan) should be decreased. The analysis also shows that the frequency of the route bus services for the other cities, counties(Guns), and wards(gus) should be increased. In Seoul metropolitan area, although route bus fares are more expensive than subway fares, passengers use route bus more frequency than subway because time distance of route bus is shorter than that of subway and subway transfer is inconvenient. In general, outside Seoul metropolitan area, air flight is preferred in the regions that have airports. In contrast, the route bus is preferred in Daegu and other regions that do not have airports.

• The Korean Journal of Applied Statistics
• /
• v.29 no.1
• /
• pp.13-25
• /
• 2016

High-speed railway (Korea Train Express) has had a deep impact on the regional economy of Korea. Current high-speed rail research is mostly theoretical, there is a lack of quantitative research using a precise algorithm to study the effect of high-speed railway on the regional economy. This paper analyses the influence of high-speed rail on the regional economy, with a focus on the Daegu area. Quantitative analysis using department store indexes and regional medical records is performed to calculate the economic influence of high-speed rail. The result shows that high-speed railway effects the regional economy though regional consumption growth and medical care trends.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.457-466
• /
• 1999

원자력 발전소 계측 제어 시스템, 의료 관련 시스템, 항공 관련 시스템 등 실생활과 밀접한 시스템에 소프트웨어의 사용이 점차 증가하고 있다. 이러한 시스템에서 소프트웨어의 오류는 예기치 않는 사고를 유발하여 인명, 재산상의 심각한 타격을 줄 수 있다. 그러므로 고신뢰도 소프트웨어의 개발 시에는 반드시 시스템의 안전성을 보장해 주어야 한다. 역방향 안전성 분석 방법은 시스템의 안전성을 분석하는 한가지 방법으로서 시스템의 위험 상태를 정의하고 그 위험의 원인들을 추적, 분석함으로써 안전성에 대한 효율적인 분석을 수행할 수 있는 장점을 갖는다. 이 논문에서는 소프트웨어 개발 초기 단계에서 안전성을 분석할 수 있는 방법으로 Colored Petri Nets(CPN)에 기반을 둔 역방향 안전성 분석 방법을 제시한다. 또한 CPN 역방향 안전성 분석 도구인 SAC(Safety Analyzer for CPN)의 설계 및 구현에 대해 언급한다. SAC은 기존의 상용 CPN 모델링 도구인 Design/CPN과 연계하여 사용될 수 있으므로 CPN으로 모델링된 시스템의 안전성을 분석할 수 있다는 장점이 있다. 이 논문에서는 예제로 자동 교통 제어 시스템의 일부를 CPN으로 모델링하고 SAC을 이용한 분석 과정을 기술한다.Abstract In safety-critical systems such as nuclear power plants, medical machines, and avionic systems which are closely related with our livings, the usage of software in the controlling part is growing rapidly. Since software errors in safety-critical systems may cause serious accidents leading to financial or human damages, system safety should be ensured during and after development of a system. A backward safety analysis technique defines system hazards and tries to trace their causes by analyzing system states backward. In this paper, we provide a backward safety analysis technique based on Colored Petri Nets(CPN), which is applicable to the early software development phase. Also Safety Analyzer for CPN(SAC), the supporting tool, is designed and implemented. Since SAC is compatible with Design/CPN, a commercial tool for supporting CPN, it can be applicable to analyze safety in practical problems. As an example, we model a part of the traffic light control system using CPN and analyze safety properties of the model using the SAC tool.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.398-407
• /
• 2018

Standard guidelines for marine accident investigation have been prepared through the enforcement of the Casualty Investigation code as of January 2010. In addition, as the International Maritime Organization (IMO) recommended contracting the state to manage a marine incident system established under this code, Korea also has newly established provisions for a marine incident system in the 'Act on the Investigation of and Inquiry into Marine Accidents' also as of 2010. The Korean Maritime Safety Tribunal (KMST) has made a multilateral effort to prevent marine accidents through the efficient operation of a marine incident system, but this system has not been properly activated. This study examines the operational status and problems of a marine incident system and analyzes the marine incident systems of foreign countries and similar transportation agencies such as railroads and aviation. Options include switching to voluntary reporting of marine incidents, transferring responsibility to a non judicial private organization, expanding incentive systems for a marine incidents, revising regulation and preparing detailed implementation guidelines.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.421-428
• /
• 2019

This study includes services that require six professional guides - health care, exhibition performance, restaurant, shopping, business and daily life - as well as a trip-based tour, along with solving existing problems that may occur on domestic and overseas trips, and proposes services that connect users with proven professional guides. As a result of previous research, the most needed services among overseas travel were air tickets, accommodation, transportation, and guides, but as Korea enters an aging society, professional guide services are expected to increase daily demand. Based on this, the service technology, user scenarios and brand development were presented. This Service Proposal provides users with a personalized guide to knowledge or experience that they have not previously known, providing them with a wealth of experience. In addition, guides can help develop new fields of expertise and help improve professional guides' capabilities. Finally, the platform service is meaningful in that it enables the creation of jobs by enabling everyone to engage in economic activities, as it allows users to provide services through their own capabilities while at the same time being convenient for them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.619-625
• /
• 2019

It is difficult to design because of the plug-holing phenomenon in which the amount of smoke discharged from the vertical vent is smaller than the designed amount of smoke. In this study, the effect of cross-sectional area ratio of tunnel and natural ventilation and heat release rate of fire source on plug-holing phenomenon occurring in natural ventilation system was experimentally analyzed. In the experiment model reduced to 1/20 size, the aspect ratio of the tunnel and the vertical vent was fixed, and the influence on the plug-holing phenomenon was confirmed by varying the sectional area ratio of the tunnel and the vertical vent. Experimental results show that the plug-holing phenomenon is caused by the comparison of the smoke boundary layer temperature with the temperature in the vertical vents, and the flow and temperature distribution characteristics under the vertical vents are changed as the cross-sectional area ratio of the tunnel and vertical vents increases. The plug-holing phenomenon is affected by the cross-sectional area ratio between the tunnel and the vertical ventilation. The greater the cross-sectional area ratio, the greater the probability of plug-holing.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2021

A corrugated pipe is widely used in firefighting equipment and sprinkler pipes because of its elasticity, which is less damaged by deformation and convenient facilities. However, the corrugated shape of the wall results in complex internal turbulent flow, and it is difficult to predict the pressure drop, which is an important design factor for pipe flow. The pressure drop in the corrugated tube is a function of the shape factors of the pipe wall, such as groove height, length, and pitch. Existing studies have only shown a study of pressure drop due to length changes in the case of D-shaped tubes with less than 5 pitch (P) and height (K) of the rectangular grooves in the tube. In this work, we conduct a numerical study of pressure drop for P/Ks with length and height changes of 2.8, 3.5 and 4.67 with Re Numbers of 55,000, 70,000 and 85,000. The pressure drop in the corrugated tube was interpreted to decrease with smaller P/K. We show that the pressure drop is affected by the change in the groove aspect ratio, and the increase in the height of the groove increases the recirculation area, and the larger the Reynolds number, the greater the pressure drop.