• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.531-542
• /
• 2002

An input and output buffering ATM switch conventionally operates in either Queueloss mode or Backpressure mode. Recently, a new mode, which is called Hybrid mode, was proposed to overcome the drawbacks of Queueloss mode and Backpressure mode. In Hybrid mode, when both the destined output buffer and the originfted input buffer are full, a cell is dropped. This thesis analyzes the cell loss rate and the cell delay of Queueloss, Backpressure and Hybrid modes in a switch adopting output-port expansion scheme under uniform traffic. Output-port expansion scheme allows only one cell from an input buffer to be switched during one time slot. If several cells switch to a same destined output port, the number of maximum transfer cells is restricted to K (Output-port expansion ratio). The simulation results show that if an offered load is less than 0.9, Hybrid mode has lower cell loss rate than the other modes; otherwise, Queueloss mode illustrates the lowest cell loss rate, which is a different result from previous researches. However, the difference between Hybrid and Queueloss modes is comparably small. As expected, the average cell delay in Backpressure mode is lower than those of Queueloss mode and Hybrid mode, since the cell delay due to the retransmission of higher number of dropped cells in Backpressure mode is not considered.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.411-413
• /
• 1999

본 논문에선느 ATM 통신망을 위한 여러 ATM 스위치 모델들 중에서, 내부적으로 블록킹(blocking)이 없고 입출력 단에 각각 버퍼가 할당되어 있는 입출력 버퍼형 교환기에 대하여 연구하였다. 기존에서 스위치 스피드-업(Switch Speed-up) 기법하에서 주로 연구가 이루어졌다. 따라서, 본 논문에서는 유니폼 트래픽하에서 Output-port Expansion 기법을 사용한 귀환.손실 모드 및 하이브리드 모드하에서의 셀 손실률을 비교 분석하였다. Output-port Expansion 기법은, 한 타임 슬롯동안에 입력포트 당 하나의 셀만 교환되며, 만약 하나 이상의 셀들이 같은 출력포트로 향하면, 최대 교환되는 셀 수를 K(Output-port Expansion Ratio)개로 제한하는 방식이다. 유니폼 트래픽(uniform random traffic) 하에서 각 모드에 따른 셀 손실률을 비교 분석한 결과, 로드 0.9를 기점으로, 0.9이하의 로드에서는 하이브리드 모드가, 0.9이상의 로드에서는 손실모드가 가장 낮은 셀 손실률을 보인다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.635-641
• /
• 2016

In order to drive a hybrid propulsion device which combines an engine and an electric propulsion unit, battery packs that contain dozens of unit cells consisting of a lithium-based battery are used to maintain the power source. Therefore, it is necessary to more strictly manage a number of battery cells at any given time. In order to manage battery cells, generally voltage, current, and temperature data under load condition are monitored from a personal computer. Other important elements required to analyze the condition of the battery are the internal resistances that are used to judge its state-of-health (SOH) and the open-circuit voltage (OCV) that is used to check the battery charging state. However, in principle, the internal resistances cannot be measured during operation because the parallel equivalent circuit is composed of internal loss resistances and capacitance. In most energy storage systems, battery management system (BMS) operations are carried out by using data such as voltage, current, and temperature. However, during operation, in the case of unexpected battery cell failure, the output voltage of the power supply can be changed and propulsion of the hybrid vehicle and vessel can be difficult. This paper covers the implementation of a high safety battery management system (HSBMS) that can estimate the OCV while the device is being driven. If a battery cell fails unexpectedly, a DC power supply with lithium iron phosphate can keep providing the load with a constant output voltage using the remainder of the batteries, and it is also possible to estimate the internal resistance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.83-86
• /
• 2011

최근 에너지/환경의 문제로 HEV(Hybrid Electric Vehicle)이 대두되고 있는데, HEV를 위한 대표적인 기술로서 제동시 에너지로 발전하여 전기를 회수하는 회생제동이 있다. 회생제동기술은 HEV 뿐만 아니라 건설기기, 하이브리드 버스, 전철, 엘리베이터 등에 폭넓게 활용이 가능하다. 회생제동용 에너지 저장원으로서는 고출력 및 환경특성이 우수한 슈퍼캐패시터가 적합하며, 단일 셀이 아닌 수십 ~ 수백 개의 셀이 모듈로 사용되는 만큼, 모듈화 설계 기술이 필요 하다. 수백 개의 셀을 모듈화하기 위해서 개별 셀의 전압을 모니터링 하는 기술과 충방전 시 밸렌싱 하는 기술, 사용환경에 따라 열 관리 기술이 필요하며, 이들 기능을 수행할 수 있는 통합 시스템을 구비하여 안정성과 성능 향상을 하고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.73-76
• /
• 2006

본 연구에서는 독일 율리히 연구소에서 도입된 면적 200mm*200mm의 연료극 지지체 평판형 SOFC 셀 및 금속 분리판 40장을 적층하여 5kW급 SOFC 스택을 제작하고 연속운전을 수행하여 운전특성을 분석했다. 본 연구를 통해 도입된 5kW급 SOFC 스택은 외국에서 시도된 적이 없는 평판형 SOFC스택의 가압운전을 시도해 보는 것으로서, 스택의 임계압력 특성을 확인하고, 이를 바탕으로 가스터빈-연료전지 하이브리드 시스템에서의 SOFC 스택 가압 운전기술을 확보하는 것이다 이러한 목적을 위해 본 연구에서는 상압형 5kW급 SOFC 스택 운전시스템에 대한 구성과 설계, 전반적인 운전 특성평가 (40셀 스택 운전 열 사이클 시험 연료 전환 $(H_2{\rightarrow}pre-reformed\;gas)$, 1200시간 연속운전 등)가 이뤄졌다.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.6
• /
• pp.373-380
• /
• 2020

We have developed the hybrid prototype load cell structures. These developed load cell structures may increase the reliability of the load sensing by deriving the load values through the double sensing method through the vertical maximum deflection and bending stress of the simple beams. For this purpose, the structure design was performed so that the load value, the deflection and stress value could be output to the same value through the optimal structure design. The structurally designed dimensions reaffirmed the accuracy of the design through the structural analysis program and the matching of the load value and the deflection value. Based on the designed structural dimension, the prototype form was constructed through laser cutting and production using hot rolled steel materials. The developed prototype load cell structure can be used as good educational material in various subjects such as material mechanics, steel structure design, measurement engineering, and mechatronics engineering. It is also believed that the measurement system ideas can inform the occurrence of errors in the event of a problem, and if a major accident caused by a sensing error is predicted, it will show good utilization to prevent accidents.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.340-344
• /
• 2003

멀티미디어 서비스는 트래픽 특성이 비대칭이기 때문에 하향링크의 무선 자원 관리의 중요성이 부각되고 있다. 여기서 제안되는 알고리즘은 기존의 전력 기반의 알고리즘을 조합한 하이브리드 형태의 알고리즘으로 현재 셀의 상황에 따라서 admission control의 형태가 바뀌는 방식이다. 본 논문에서는 하이브리드 형태의 알고리즘과 기존의 전력 기반의 알고리즘을 simulation을 통해서 비교 분석한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.61-70
• /
• 2005

In this paper, we propose an efficient global placement algorithm which is an enhanced version of Hybrid Placer$^{[25]}$, a standard cell placement tool, which uses a middle-down approach. Combining techniques used in the well-known partitioner hMETIS and the RBLS(Relaxation Based Local Search) in Hybrid Placer improves the quality of global placements. Partitioning techniques of hMETIS is applied in a top-down manner and RBLS is used in each level of the top-down hierarchy to improve the global placement. The proposed new approach resolves the problem that Hybrid Placer seriously depends on initial placements and it speeds up without deteriorating the placement quality. Experimental results prove that solutions generated by the proposed method on the MCNC benchmarks are comparable to those by FengShui which is a well known placement tool. Compared to the results of the original Hybrid Placer, new method is 5 times faster on average and shows improvement on bigger circuits.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.52-57
• /
• 2014

The MCMB-$Li_4Ti_5O_{12}$ with core-shell structure was prepared by sol-gel process to improve low cycle capability of MCMB in this study. The electrochemical characteristics were investigated for hybrid capacitor using MCMB-$Li_4Ti_5O_{12}$ as the negative electrode and $LiMn_2O_4$, Active carbon fiber as the positive electrode. The electrochemical behaviors of hybrid capacitor using organic electrolytes ($LiPF_6$, EC/DMC/EMC) were characterized by charge/discharge, cyclic voltammetry, cycle and impedance tests. The hybrid capacitor using MCMB-$Li_4Ti_5O_{12}/LiMn_2O_4$ electrodes had better capacitance than MCMB hybrid systems and was able to deliver a specific energy with 67 Wh/kg at a specific power of 781 W/kg.

• Composites Research
• /
• v.36 no.6
• /
• pp.422-428
• /
• 2023

The electrical contact resistance between the bipolar plate (BP) and the carbon felt electrode (CFE), which are in contact by the stack clamping pressure, has a great impact on the stack efficiency because of the relatively low clamping pressure of the vanadium redox flow battery (VRFB) stack. In this study, a polyethylene (PE) composite-CFE hybrid bipolar plate structure is developed through a local heat welding process to reduce such contact resistance and improve cell performance. The PE matrix of the carbon fiber composite BP is locally melted to create a direct contact structure between the carbon fibers of CFE and the carbon fibers of BP, thereby reducing the electrical contact resistance. Area specific resistance (ASR) and gas permeability are measured to evaluate the performance of the PE composite-CFE hybrid bipolar plate. In addition, an acid aging test is performed to measure stack reliability. Finally, a VFRB unit cell charge/discharge test is performed to compare and analyze the performance of the developed PE composite-CFE hybrid BP and the conventional BP.