• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.197-204
• /
• 2021

This study relates to a device that increases efficiency by reducing air bubbles in a hydraulic system used in hydraulic machinery. The reverse design and product production of the bubble reduction device, which is a commercial product overseas, was carried out. Overseas commercial products were set as the base model, a rotary rotor and an inclined rotor were added to increase the surface area of the fluid, and an annular equal distribution part with a slot in the lower part was additionally applied to distribute the fluid evenly. In addition, internal flow trends were analyzed and a system that evenly distributes the linear flow of fluid was selected as the first improvement model. Based on the first improvement model, a case where the angle of the inclined rotor is 45° was selected as the second improvement model. Based on this, as a result of setting the exit width of the annular equally distributed part as a variable, the bubble reduction efficiency was highest when the lower slot diameter of the annular part was 10mm. Finally, the system in which the average cross-sectional flow velocity decreased by 147% compared to the Base Model was derived as the final improved model.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.82-90
• /
• 2007

In an attempt to establish the appropriate ventilation device for the bottle culture of king oyster mushroom (Pleurotus eryngii), we investigated carbon dioxide concentration and fruiting body formation according to the various ventilation systems within the mushroom house. In addition to, the efficiency of air circulation and growth rate as well as the appearance of physiologically abnormal phenotypes during their growth stage were also evaluated. four different ventilation devices, parallel-pressure type, positive-pressure type, negative-pressure type, and positive- and negative-pressure type were applied in this study. The positive-and negative-pressure type showed the highest efficiency of air circulation as $CO_2$ concentration was 800 ppm and the level of air current was relatively low compared to the other types (the $CO_2$ concentration of parallel-pressure type was 1,400 ppm). Moreover, the stipe length, the cap diameter, yield, and general quality grown in positive- and negative type ventilation device were also better than in the other three devices though it took slightly longer period for harvesting (18.4 days) than the others (17.6, 17.9 and 18.3 days). The appearance of physiologically abnormal phenotypes such as fruiting body lump, soft rot, and brown rot were significantly decreased in positive-and negative type compared to other types, while the appearance rates were not much different for other symptoms of bacterial ooze, stipe limb and stipe bumpy. In summary, we propose that the optimal ventilation system for the bottle culture of king oyster mushroom is positive- and negative type, and this device is expected to increase the total quality as well as yield all year around.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.236-238
• /
• 2009

에너지 절약차원에서 냉방을 줄여 지구온난화 방지에 일조하고자 여름철에 가벼운 차림의 의복을 권장하는 쿨비즈 캠페인이 시작되었으나 이의 정량적인 효과를 분석하는 연구가 미흡하였다. 본 연구에서는 여름철 온실가스 줄이기 및 직장인 등의 건강증진 등을 위하여 기후복장 적응형에 대한 범국민 인식 및 실천 필요를 바탕으로, 실험을 통해 쿨비즈에 의한 생리적 반응 측정 및 주관적 감각평가를 실시하였다. 1 차실험은 두 복장(전통의복,기후의복)의 피부온 측정실험으로, 환경온 25, $27^{\circ}C$, 상대습도 50% RH 에서 20 대 성인남성 4 명을 대상으로 실험을 하였다. 피험자는 심신을 안정할 수 있도록 30 분간의 안정기를 가진 후에 60 분 동안 실험을 하였으며, 사무실 내 작업환경과 같은 분위기 조성을 위해 편안하게 의자에 앉아 가벼운 대화나 컴퓨터 워드작업 및 설문을 응할 수 있도록 피험자 앞 책상 위에는 노트북을 설치해 두었고, 실험 진행기간 동안 피부온, 직장온, 습도, 발한량, 열화상 카메라, 온열감, 습윤감, 쾌적감 등과 같은 주관적 감각을 측정하였다. 2 차 실험은 동일 피부온 발현하는 환경온 찾기로 기준온도($27^{\circ}C$)에서 전통복장을 입고 온도를 점진적으로 하강시키면서 $27^{\circ}C$ 기후 복장을 입은 상태의 피부온도와 동일해지는 실내온도를 측정한다. 착의 형태에 따른 피부온도 변화에서 환경온도 $25^{\circ}C$ 전통의복 기후의복에 의한 피부온도의 차이는 전통의복이 최소 0.3~최대 $1.6^{\circ}C$ 더 높게 나타났으며, 환경온도 $27^{\circ}C$에서 전통의복 기후의복에 의한 피부온도의 차이는 대체적으로 전통의복이 최소 0.4~최대 $1.0^{\circ}C$ 더 높게 나타났다. 주관적 감각평가에서도 기후의복보다 전통의복에서 온열감 습윤감 불쾌감이 더 높은 경향을 보였다. 주관적 감각으로는 $25^{\circ}C$ 전통의복과 $27^{\circ}C$ 기후의복에서 중립적인 느낌을 나타냈다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.4
• /
• pp.29-37
• /
• 1995

A resonant frequency of piezoelectric transducer depends remarkably on the electric impedance connected to the vibrator. In this paper, using this effect of frequency controllable two layered PZT ultrasonic transducer is designed and its acoustic characteristics are analyzed by a new transmission model equivalent circuit. The theoretical and the experimental results of the electric impedance effect on the resonant frequency variation were compared and both results showed a good consistency each other. The resonant frequency has been controlled continuously in the wide frequency range of 180kHz~580kHz and the effective attenuations were less than 7dB in the frequency range of 330kHz~470kHz.

• Journal of Korea Water Resources Association
• /
• v.40 no.10
• /
• pp.793-800
• /
• 2007

This research applied to Wavelet transform that have soft resolution time and frequency area for stage of Hadong2 station in order to extract to discharge component by rainfall and tidal level component by tide. Approximation component(A6) of last level for wavelet decomposition displayed the biggest energy value 87.77%, and detail component(D3) energy value was 10.70% with periodicity of semidiurnal tide type(about 12 hours). Also skewness, kurtosis values of D3 have similar to tidal level of Yeosu. Approximation component(A6), Detail component(D6, D5) for Hadong2 stage was runoff component, and detail component(D4, D3, D2) was tide component according to effect of tide.

• Journal of the Korea Convergence Society
• /
• v.2 no.4
• /
• pp.21-27
• /
• 2011

Recently, new distributed power sources such as photovoltaic, wind power, fuel cell systems etc. are energetically interconnected and operated in the distribution feeders, as one of the national projects for alternative energy. When new power sources are considered to be interconnected to distribution systems, bi-directional power flow and interconnection conditions of new power sources may cause several power quality problems like voltage sag, voltage swell, harmonics, since new power sources can change typical characteristics of distribution systems. Under these situations, this paper deals with the analysis the power quality problems at primary and secondary feeders in distribution systems, when new power sources like photovoltaic (PV) systems are interconnected, by using the test devices for PV systems based on the LabVIEW S/W. This paper presents the test device which is consisted with model distribution system and model PV systems. By performing the simulation for power quality operation characteristic based on the test facilities, this paper presents the optimal countermeasures for power quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.363-363
• /
• 2013

태양광 발전산업에서 현재 주류인 결정 실리콘 태양전지의 변환효율은 꾸준히 향상되고 있으나, 태양전지의 가격이 매년 서서히 하강되고 있는 실정에서 결정질 실리콘 가격의 상승 등으로 부가가치 창출에 어려움이 있으며, 생산 원가를 낮출 수 있는 태양전지 제조기술로는 2 세대 태양전지로 불리는 박막형이 현재의 대안이며, 특히 에너지 변환 효율과 생산 원가에서 장점이 있는 것이 CIGS 박막 태양전지로 판단된다. 화합물반도체 베이스인 CIGS 박막태양전지는 연구실에서는 세계적으로 20.3% 높은 효율을 보고하고 있으며, 모듈급에서도 13% 효율로 생산이 시작되고 있다. 국내에서도 연구실 규모 뿐만 아니라 대면적(모듈급) CIGS 박막태양전지 증착용 장비, 제조공정 등의 기술개발이 진행되고 있다. CIGSe2를 광흡수층으로 하는 CIGSe2 박막 태양전지의 구조는 여러 층의 단위박막(하부전극, 광흡수층, 버퍼층, 상부투명전극)을 순차적으로 형성시켜 만든다. 이중에 소다라임유리를 기판으로 하는 하부전극은 Mo 재료를 스퍼터링 방법으로 증착하여 주로 사용한다. 하부전극은 우수한 전기적 특성이 요구되며, 주상조직으로 성장하여야 하며, 고온 안정성 확보를 위하여 기판과의 밀착성이 좋아야하고 또한 레이저 패턴시 기판에서 잘 떨어져야 하는 특성을 동시에 가져야 한다. 본 연구에서는 대면적 CIGSe2 박막태양전지에서 요구되는 하부전극 Mo 박막의 제작과 그 특성에 대해 평가하고, 최종적으로 대면적 CIGSe2 박막태양전지 공정에 적용 그 결과를 논하고자 한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.49-58
• /
• 2014

A low-swing differential near-ground signaling (NGS) transceiver for low-power high-speed mobile I/O interface is presented. The proposed transmitter adopts an on-chip regulated programmable-swing voltage-mode driver and a pre-driver with asymmetric rising/falling time. The proposed receiver utilizes a new multiple gain-path differential amplifier with feed-forward capacitors that boost high-frequency gain. Also, the receiver incorporates a new adaptive bias generator to compensate the input common-mode variation due to the variable output swing of the transmitter and to minimize the current mismatch of the receiver's input stage amplifier. The use of the new simple and effective impedance matching techniques applied in the transmitter and receiver results in good signal integrity and high power efficiency. The proposed transceiver designed in a 65-nm CMOS technology achieves a data rate of 13 Gbps/channel and 0.3 pJ/bit (= 0.3 mW/Gbps) high power efficiency over a 10 cm FR4 printed circuit board.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.76-82
• /
• 2001

Because the biological tissue with inhomogeneous acoustic properties does not keep a particular shape, the measurement of propagation characteristics of ultrasonic fields by the conventional scanning method with a miniature hydrophone is difficult. In this study, a two-dimensional may hydrophone was fabricated using the PVDF (Polyvinylidene fluoride) piezo-electric film and a ultrasonic field measurement system with it was established. For the acoustic field produced by a circular plan transducer with center frequency of 2.25㎒ and 13㎜ in diameter, it was possible to make a fairly accurate field measurement using the hydrophone system. The attenuation coefficients at 2.25 ㎒ for biological tissues were 0.7∼1.3 dB/cm(average; 1.0 dB/cm) in bovine liver, 1.0∼1.8 dB/cm (average; 1.6 dB/cm) in pig liver, 0.9∼2,9 dB/cm(average: 2.1 dB/cm) in bovine muscles, 1.7∼3.3 dB/cm (average; 2.5 dB/cm) in pig muscles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1073-1081
• /
• 2005

This paper describes a 3.3 V 10 bit CMOS digital-to-analog converter with a divided architecture of a 7 MSB and a 3 LSB, which uses an optimal Thermal-to-Binary Decoding method. Most of Dfh converters with hiか speed current drive are an architecture choosing current switch cell, column, row decoding method but this decoding circuit is complicated, occupies a large chip area. For these problems, this paper describes a D/A converter using an optimal Thermal-to-Binary Decoding method. The designed D/A converter with an active chip area of $0.953\;mm^2$ is fabricated by using a 0.35um process. The simulation data shows that the rise/fall time, settling time, and INL/DNL are 1.92/2.1 ns, 12.71 ns, and a less than ${\pm}2.3/{\pm}58$ LSB, respectively. The power dissipation of the D/A converter with a single power supply of 3.3 V is about 224 mW.