• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.224-237
• /
• 1995

An ECU(Electronic Control Unit) with 16 bit microcomputer has been developed. This system includes hardware and software for more precise control on fuel injection, ignition timing, and idle speed. This control system employs an air flow sensor of the hot wire type, a direct ignition system, an idle speed control system using a solenoid valve, and a crank angle sensor. Especially, the crank angle sensor provides two separate signals: One is the position signal(POS) which indicates 180 degree pulses per revolution, and the other is the reference signla(REF) that represents each cylinder individually. The conventional engine control system requires at least two engine revolutions in order to identify the cylinder number. However, the developed engine control system can recognize the cylinder number within a quarter of an engine revolution. Therfore, the developed engine control system has been able to control fuel injection and ignition timing more quickly and accurately, Furthermore, the number of misfire reduces during the cold start.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.21-26
• /
• 2008

In this paper, we extracted descending slope tracing waves (DSTW) and form factors (FF), and compared the detecting results of premature ventricular contraction (PVC) which were derived from DSTW and FF in order to find an efficient method. The 2nd. derivatives and DSTW were employed to extract correct R-waves from ECG. To evaluate extracting methods, ECGs including PVCs from MIT/BIH database were used.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.154-160
• /
• 2017

In this paper, we studied the Bartlett method to correctly estimate the targets of a unmanned vehicles. The Bartlett method estimates the desired signals by making the gain constant for the received signal incident on the array antenna. In this paper, the weights of the Bartlett method are updated by applying the winner method and steepest descent method in order to estimation the accurate unmanned. The updated weights improve the resolution of the existing Bartlett method by applying optimal weights to all received signals received at the array antenna. Through simulation, we are comparative analysis about the performance of proposed method. From result of simulation, We showed the superior performance of the proposed method relative to the classical method, and Bartlett using steep descent method showed more superior than one using wiener method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.14-19
• /
• 1990

This paper describes on the characteristics of the acoustic echoes from the scattering layers by the aggregation of marine organisms which was measured by using a 50kHz echo sounder on board of the training ship SAEBADA belong to National Fisheries University of Pusan during the summer, 1989 in the East China Sea. A data acquisition system was used to record digitally the envelope of the echoes and the frequency distribution of echo amplitudes on the whole water column was examined as a function of time during the sunrise and sunset periods. Acoustic data showed that the abundance distribution of marine organisms according to depth in the servery area changed with time and that the organisms were most active during the twilight of morning, and the echo strength on the water column or scattering layer was also strongest during this time. Additional results of this survey suggest that other interest, such as the relationship between environmental conditions and biomass depth distribution, could be also investigated in hydroacoustic method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.524-532
• /
• 1997

수중음향표적 특히 선박방사소음을 탐지하거나 식별하는 군사적 목적의 수동소나는 수중청음기 배열로 구성되며 각 배열센서에 수신된 신호에 배열 신호처리기술을 적용하여 선박의 거리, 방위 탐지는 물론 선박의 음향적 특징을 식별하는 고도의 음향장치이다. 그러나 이러한 장치운용자의 선박탐지, 식별이나 새로운 수동소나 개발, 나아가 스텔스 능력의 선박 설계를 위해서는 선박방사소음의 측정, 분석 및 예측에 관한 이해가 선행되어야 할 것이다. 본 연구는 대표적인 선박방사소음 측정시스템의 소개, 방사소음발생기구, 측정자료의 분석 및 예측에 관한 기초기술을 연구 분석한 내용이다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.146-148
• /
• 2010

본 논문에서는 SFC로 기술된 PLC 프로그램에서 외부 이벤트가 발생하는데 엣지동작에 관해 고찰해 본다. SFC 프로그램에서는 이벤트가 발생하는데 상승엣지와 하강엣지일 때의 이진 신호 이론을 고찰해보고, 수학적인 정의는 어떻게 정리되는지를 고찰해본다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.233-235
• /
• 2020

본 논문은 40 kV 나노초 펄스발생을 위한 모듈형 solid-state Marx modulator(SSMM) 설계에 대해 기술한다. 가속기 및 플라즈마 어플리케이션과 같은 다양한 응용분야에 요구되는 전압 및 전류 사양을 만족시키기 위해 10 kV(출력 전압), 50 ns(펄스폭), 20 ns(상승&하강 시간), 100 kHz(반복률)의 사양을 만족하는 단위모듈기반으로 모듈형 설계를 제안한다. 독립적인 제어가 가능한 4개의 단위모듈을 기반으로 제안된 SSMM은 임의의 출력 파워 및 임피던스를 만족시킬 수 있는 장점을 가지고 있다. 예를 들어, 모든 단위모듈의 위상을 같게 했을 때 출력전압을 증가시킬 수 있으며 각 모듈의 위상을 지연하였을 경우는 펄스의 반복률을 크게 높일 수 있다. 개발된 SSMM은 직렬 스택 MOSFET의 스위칭 성능을 향상시키기 위해 게이트 구동 회로는 동기 신호와 구동 전력을 제공하는 1 턴 변압기로 설계되었다. 출력 펄스의 폭과 하강시간을 최소화하기 위해 다이오드 대신 기생 커패시턴스에 저장된 에너지를 빠르게 방출하는 액티브 풀다운 회로가 적용되었다. 또한, 출력 펄스의 빠른 상승을 달성하기 위해 게이트의 라인 인덕턴스를 최소화하고 모든 게이트 신호의 동기화는 필수적이다. 개발된 ns급 펄스전원장치는 단위모듈을 기반으로 최대 펄스전압이 40 kV 까지 출력이 가능하며 이에 대한 상세설계 및 구현은 실험결과를 바탕으로 검증한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.133-138
• /
• 2017

This paper presents a jitter characteristic improved phase locked loop (PLL) with an RC time constant circuit. In the RC time constant circuit, LPF's voltage is inputted to a comparator through small and large RC time constant circuits. The signal through a small RC time constant circuit has almost same loop filter output voltage. The signal through a large RC time constant circuit has the average value of loop filter output voltage and does as a role of reference voltage to the comparator. The output of the comparator controls the sub-charge pump which provide a current to LPF. When the loop filter output voltage increases, the sub-charge pump discharges the loop filter and decreases loop filter output voltage. When the loop filter output voltage decreases, the sub-charge pump charges the loop filter and increases loop filter output voltage. The negative feedback loop reduces the variation of loop filter output voltage resulting in jitter characteristic improvement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.398-404
• /
• 2020

In this paper, we propose a new design method of signal constellation of the spiral quadrature amplitude modulation (QAM) exploiting a modified gradient descent search algorithm and its binary mapping rule. Unlike the conventional method, the new method, which uses and the constellation optimization algorithm and the maximum number of iterations as a parameter for the iterative design, is more robust to phase noise. And the proposed binary mapping rule significantly reduces the average Hamming distance of the spiral constellation. As a result, the proposed spiral QAM constellation has much improved error performance compared to the conventional ones even in a very severe phase noise environment. It is, therefore, considered that the proposed QAM may be a useful modulation format for coherent optical communication systems and orthogonal frequency division multiplexing (OFDM) systems.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.37-42
• /
• 2021

This paper presents a jitter and phase noise characteristic improved phase-locked loop (PLL) with loop filter voltage detector(LFVD) and frequency voltage converter(FVC). Loop filter output voltage variation is determined through a circuit made of resistor and capacitor. The output signal of a small RC time constant circuit is almost the same as to loop filter output voltage. The output signal of a large RC time constant circuit is the average value of loop filter output voltage and becomes a reference voltage to the added LFVD. The LFVD output controls the current magnitude of sub-charge pump. When the loop filter output voltage increases, LFVD decreases the loop filter output voltage. When the loop filter output voltage decreases, LFVD increases the loop filter output voltage. In addition, FVC also improves the phase noise characteristic by reducing the loop filter output voltage variation. The proposed PLL with LFVD and FVC is designed in a 0.18um CMOS process with 1.8V power voltage. Simulation results show 0.854ps jitter and 30㎲ locking time.