• Geophysics and Geophysical Exploration
• /
• v.18 no.3
• /
• pp.97-104
• /
• 2015

KIGAM has surveyed most of the Korean territory since 1982 using airborne gamma-ray spectrometry, and complete the nationwide scale map in the near future. However, since the duration of survey is too long and the conditions of survey is not consistent, the data does not have physical consistency. In addition, the window counts (count/sec) were recorded instead of potassium, uranium and thorium radioelement concentrations. Thus, the data could not be registered to the International Atomic Energy Agency (IAEA) radioelement datum. This limits the usefulness of the data and it is not possible to easily combine surveys into regional compilations or make quantitative interpretations between different survey areas. To solve these problems, we undertook a test baseline survey over Jincheon-Eumseong area, to level the different two sets of data and to map radioelement concentrations. This survey confirms to IAEA radioelement baseline. The method and procedures of data leveling prepared by this study improve the usefulness and usability of the radiometric data, and make it enable to compile the nationwide scale radioelement concentration maps.

• Journal of The Korean Association For Science Education
• /
• v.25 no.4
• /
• pp.503-513
• /
• 2005

The purpose of this study was to analyze the generating processes of scientific emotion, that appears during the generation of biological hypotheses. To perform the study, a tentative model was set up through pilot test, a think-aloud training procedure was planned and a standardized interview instrument was developed before getting protocols. In this study, 8 college students were selected to bring out protocol through the method of think-aloud, retrospective debriefing, focused interview and observing. As the result of analysis of the collected protocol through coding scheme, 4 types of process for scientific emotion-generating were sorted out. First type was a basic process which was a feeling process in prior to recognition. Second type was a retrospective process that explains the process of retrospect for emotional memory based on the past. Third type was a cognitive process and it explains emotion that occurs during thinking process to achieve cognitive goal. Fourth type was an attribution process and it explains that emotion is generated in the process of attribution for cognitive goal's achievement. These types of process of scientific emotion-generating can contribute the basis for developing cognitive model of EBL (Emotional Brain-based Learning) strategy.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.73-85
• /
• 2014

As the importance of big data analysis increases to improve the competitiveness of a corporate, a unified big data project development methodology is required in order to study the problem of a corporate in a systematic way and evaluate the problem w.r.t. a business value after solving the problem. This paper propose Scientific Data Anslysis and Development methodology(SDAD) which are integrated methodology of software development and project management for easier application into a field project. SDAD consisits of 6 stages(problem definition stage, data preparation stage, model design stage, model development stage, result extraction stage, service development state), each stages has detailed processes(47) and productions(93). SDAD, furthermore, unified previous ISP, DW, SW development methodologies in terms of the data analysis and can easily interchange the productions with them. This paper, lastly, introduces a way to assign responsible persons for each process and provide communication procedures in RACI chart to improves the efficiency of the interaction among professionals from different subjects. SDAD is applied to a Bigdata project in Korea Employment Information Services institution and the result turned out to be acceptable when evaluated by the supervision.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.135-150
• /
• 2005

In this paper, we propose an integrated information retrieval system for distributed multiple KRISTAL-2002 systems by using the metadata information. This system integrates current systems for different areas or systems for the same area with the different schemas so that the users can get the answers by once from the whole systems. The proposed system composes of the Source Server Manager(SSM) supporting the mapping between the integrated metadata database and source server, the Integrated Metadata Manager(ISM) for registering and managing the metadata and schema mapping, the Distributed Query Processor (DQP) for processing the user query into the source server query, the Distributed Data Set Integrated Manager(DDSIM) for transforming the total retrieval results by merging to the HTML format, and the integrated retrieval engine for managing the query results. It is assumed that the integrated metadata follows ISO/IEC 11179 metadata registration procedure with the metadata registry system which is a subsystem of the proposed system. There are two kinds of queries for users; the basic query and the detailed query. The users may select the databases or organizations for results by their own choices before giving the queries. The proposed system has been developed over KRISTAL-2002 systems with $Visual C^{++}\;and\;C^{++}-CGI$ and tested and verified with the six database systems.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.55-67
• /
• 2010

The main purpose of this study is to develop a system and data model extracted from the TO-BE process model of rental apartments to promote information exchange based on knowledge obtained through maintenance status analysis. Currently, it is difficult to find examples suggesting a data model through a process analysis of maintenance in rental apartments. Thus, this study intends to suggest a process as well as a data model to promote the development of a maintenance system for rental apartments by using building management knowledge, utilization of standardized tools, and existing FM (Facility Management) techniques to break through limitations in actual application. Ultimately, this study aims to show examples of document-oriented analysis and information technology for middle managers in charge of the maintenance of rental apartments, as well as work analysts developing the maintenance system. In further research beyond this study, complex issues on the maintenance of rental apartments, legal restrictions on customary practices of maintenance activities, effects of the scales of maintenance practices, requirements to perform maintenance activities, evaluation on the status of maintenance, life cycle cost and risks will be investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.492-500
• /
• 2018

The performance evaluation of cold weather clothing is mainly carried out with thermal resistance. However, the results of the revised test method regarding the same specimen were decreased compare to previous one. In addition, there were deviations of the results among the authorized testing institutes according to the different interpretation of the KS test method. This makes it a considerable difficulty to the quality assurance of combat supplies. The purpose of this study is to minimize the variation of the results before and after the revision by analyzing the cause of the decrease in the heat insulation rate according to the revised test method. For this purpose, the difference between the test conditions before and after the revision of KS is analyzed and the possible results are reviewed. In addition, we want to minimize the result deviation between testing laboratories by analyzing the cause of the result deviation between test laboratories according to arbitrary interpretation of the standard. Based on this, we propose a standardized test method to prevent the decrease of the heat insulation rate by checking the pre-revision test method and the condition with the least deviation.

• Land and Housing Review
• /
• v.7 no.2
• /
• pp.87-95
• /
• 2016

Housing benefits service that was implemented according to the National Basic Livelihood Security Act in 2002 has been changed with the enactment of "Housing benefits Law"(2014.1.24). Though the service was conducted for 13 years to improve the living environment of recipient households and create self-supporting jobs for low-income, there was a limit to ensure the efficiency due to variations in the administrative act and implementation in local governments. For that reason, the sales account and the profits of self-supporting enterprises and their cooperative in housing welfare sector that played a pivotal role had gone through many ups and downs and that is why the national coalition of self-supporting enterprises that were newly formed are forced to take self-effort and play a leading role for the improvement of future beneficiaries' satisfaction, namely to develop the level of service to keep the decent jobs consistent for low-income while responding institutional policy change and the demands for improving the home-amelioration system. Accordingly, this article has attempted to supplement existing research on housing-benefits service and determine how the field can keep pace with the new institutional environment. As a result, first, Central self-supporting enterprises provide high specialized-quality services to low-income families, second, central self-supporting enterprises induce to transition customized service agencies for improving the quality of residential housing benefits, Third, Housing self-supporting enterprises should correspondence with institutional change through the provision of explicit guidelines in relating to housing-service amelioration, the last, business practical process shall be accompanied by a consistent basis for innovative and procedural standards.

• Journal of Educational Research in Mathematics
• /
• v.22 no.2
• /
• pp.229-259
• /
• 2012

The purpose of the present study is to develop instrument of mathematical belief of middle school and high school students and to analysis results of test using the instrument. Based on the results of literature review, mathematical belief is the cumulative effects of self-assessment and self-concept in mathematical learning and achievement experience. Four sub-components of mathematical belief is identified belief of school mathematics, belief of mathematical problem solving, mathematical self-concept, belief of mathematical teaching and learning. The instrument was developed to investigate mathematical belief by reflecting Korean middle school and high school students' psychological characters. To develop the appropriate items for the mathematical belief, after reviewing literature thoroughly, first version of the instrument was developed and exploratory factor analysis and confirmatory factor analysis were conducted. Then, to reduce the effect of the gender difference and achievement level difference, Correlation Analysis and 1-way ANOVA was performed. Also, using multiple group confirmatory factor analysis, this instrument was investigated to see whether this can be used for both middle school and high school. The final items for middle school students is consisted 7 items of belief of school mathematics, 9 items of belief of mathematical problem solving, 11 items of mathematical self-concept, 10 items of belief of mathematical teaching and learning. Instrument of mathematical belief for high school students is consisted 9 items of belief of school mathematics, 9 items of belief of mathematical problem solving, 11 items of mathematical self-concept, 11 items of belief of mathematical teaching and learning. This study examined the differences about mathematical belief's sub-factors shown by three groups of mathematics achievement level. Students of higher achievement level showed that the degree of most factors ware the highest excepting stereotype of belief of school mathematics. Also, Male students preferred more positive in mathematics belief than female students.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.939-945
• /
• 2008

Tn this paper we described the process and the results of an implementation of Internet terminal using G.729.1 wideband speech codec for next generation network. For this purpose firstly we chose a high performance RISC application processor having DSP features for speech codec processing and enhanced Multimedia Accelerator(eMMA) function for video codec. In the implementation of this terminal, we used G.729.1 codec recently standardized in ITU-T which is a new scalable speech and audio codec that extends 0.729 speech coding standard. To adopt G.729.1 codec to this terminal we transformed most of the fixed point C codes which require more complexity into assembly codes so as to minimize processing time in the processor. As a result of this work we reduced the execution time of the original C codes about 80% and operated in real time on the terminal. For video we used H.263/MPEG-4 codec which is supported by the eMMA with hardware in the processor. In the SIP call processing test connected to real network we obtained under looms end-to-end delay and 3.8 MOS value measured with PESQ instrument. Besides this terminal operated well with commercial terminals.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.563-572
• /
• 2016

Recently, a plenty of credit card payment protocols have been proposed in Korea. Several features of proposed protocols include: using passwords for user authentication in stead of official certificate for authenticity, and no need to download additional security module via ActiveX into user's devices. In this paper, we suggest two new credit card payment protocols that use both SSL(Security Socket Layer) as a standardized secure transaction protocol and password authentication to perform online shopping and payment. The first one is for the case where online shopping mall is different from PG(Payment Gateway) and can be compared to PayPal-based payment methods, and the second one is for the case where online shopping mall is the same as PG and thus can be compared to Amazon-like methods. Two proposed protocols do not require users to perform any pre-registration process which is separate from an underlying shopping process, instead users can perform both shopping and payment into a single process in a convenient way. Also, users are asked to input a distinct payment password, which increases the level of security in the payment protocols. We believe that two proposed protocols can help readers to better understand the recent payment protocols that are suggested by various vendors, and to analyze the security of their payment protocols.