• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.169-179
• /
• 2003

Undrained shear strength of clay deposit is one of the most important properties in the design of geotechnical structures. The use of piezocone test is rapidly growing due to its merit that can measure the in-situ undrained shear strength continuously with less error. The reliability of the shear strength from piezocone test depends upon the cone factor applied. Many researchers have suggested different ranges of values for the factors. This study performs to find out the validity of the suggested values in Korea and their charateristics related to the mechanical properties of clay. Piezocone tests were performed at the site of pilot project of ground improvement at Yangsan-Mulgeum Gyeongnam to investigate the charateristics of piezocone factors. The piezocone fators$(N_{kt}, N_{ke}, N_{\Delta u})$ based on the undrained shear strength from quick triaxial compression test are generally within the suggested range. And there appears considerable relations between undrained shear strength and $(N_{kt}, N_{ke}, N_{\Delta u})$ and between preconsolidation pressure and $(N_{kt}, N_{ke})$, while plasticity index, rigidity index and friction ratio do not show any relations with cone factors. The results also reveal that factor $(N_{\Delta u})$ shows higher reliability than factors $(N_{kt} and N_{ke})$, which show smaller standard deviation, breadth of change and scattering.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.90-96
• /
• 2014

Purpose: The purpose of this study is to see what impact the heat and press-on-metal technique has on the marginal fit of metal ceramic crown. Materials and methods: Prior to the experiment, 4 metal master models were prepared. Each model has margin of chamfer, margin of heavy chamfer, margin of shoulder with bevel and margin of shoulder (collarless). Additionally, 10 crowns were made for each margin, total of 40 crowns. Marginal discrepancy between the master model and crown was observed at ${\times}100$ microscopic magnification in two states; in coping state and upon completion of making metal ceramic crown. Data analysis was performed using paired t-test along with one-way ANOVA and Duncan multiple comparison test. Results: After analyzing mean and standard deviation of marginal discrepancy, it was confirmed that marginal discrepancies were within the clinical permitted range for all states; in coping state and upon completion of making metal ceramic crown. For the chamfer group, a significant increase in marginal discrepancy upon completion of making metal ceramic crown was observed compared to the heavy chamfer group. Also, a marginal discrepancy of porcelain margin in shoulder group was significantly less than the marginal discrepancy of metal margin in chamfer and shoulder group. Conclusion: From the test result, one can conclude that marginal fit of metal ceramic crown built with heat and press-on-metal technique is not significantly different from marginal fit of metal ceramic crown built with traditional technique. And along with efficiency of this system, heat and press-on-metal technique is considered in clinic.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.1
• /
• pp.75-81
• /
• 2015

Purpose: The present study was conducted to investigate whether the changes in structure and activity of antioxidative enzymes, superoxide dismutase(SOD) and catalase(CAT) present in the eyes appeared when they were repeatedly exposed to UV-A, and reveal the correlation of these changes. Methods: Each enzyme solution was prepared from the standardized SOD and CAT, and repeatedly exposed to UV-A of 365 min under the condition of 30 minutes, 1 hour and 2 hours a day over 1, 2, 3, 4 and 5 days. Structural denaturation of SOD and CAT induced by repeat UV-A irradiation was confirmed by the electrophoretic analysis, and their enzyme activity was determined by the colorimetric assay using the proper assay kit. Results: SOD exposed repeatedly to UV-A showed the polymerization pattern through the electrophoretic analysis when it was repeatedly exposed under the condition of at least 1 hour a day however, the change of its activity was found to be less than 12%. On the other hand, CAT repeatedly exposed to UV-A showed reduced size of the electrophoretic band which indicated a structure denaturation and its activity was significantly decreased. In the case of that the repeat exposure time was longer, CAT activity was completely lost even though some enzyme band was shown in the electrphoretic analysis. Conclusions: From these results, it was revealed that the degree and pattern in structural denaturation of antioxidative enzymes differently appeared according to the type of enzyme, and the degree of structural denaturation was not always consistent with the reduction in enzyme activity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1433-1446
• /
• 2013

In this study, we proposed a methodology to develop Rating Curves for high water level using rainfall generation by the Monte Carlo Simulation (MCS) technique, optimized rainfall-runoff model, and flood routing model in an urban stream. The developed stage discharge Rating Curve based on observed data was contained flow measurement errors and uncertainties. The standard error ($S_e$) for observations was 0.056, and the random uncertainty ($2S_{mr}$) was analyzed by ${\pm}1.43%$ on average, and up to ${\pm}4.27%$. Moreover, it was found that the Rating Curve extensions by way of logarithmic and Stevens methods were overestimated to compare with the urban basin scale. Finally, we confirmed that the high water level extension by random generation of hydrological data using MCS can be reduced uncertainty of the high water level, and it will consider as a more reliable approach for high water level extension. In the near future, this results can be applied to real-time flood alert system for urban streams through construction of the high water level extension system using MCS procedures.

• Pediatric Infection and Vaccine
• /
• v.6 no.1
• /
• pp.101-106
• /
• 1999

Purpose : Tuberculosis, a major public health problem, is an important cause of childhood infectious diseases. To decrease the tuberculosis morbidity rate, BCG vaccination and chemoprophylaxis are performed. Recently 2TU PPD skin test was introduced as a diagnostic method for tuberculous infection. We studied the positive conversion rate of 2TU PPD test after percutaneous multiple puncture BCG vaccination. Methods : Four hundred seventy six infants from well baby clinic of Samsung Cheil Hospital were enrolled. They were immunized with percutaneous multiple puncture technique BCG(Japan BCG laboratory, Japan) at 1 month of age. Approximately 6 months later, tuberculin skin test using RT23 2TU PPD was performed. Induration size, family history of tuberculosis and number of BCG scars were evaluated. Induration greater than or equal to 5mm was defined as positive conversion. Results : Among 476 infants, 248(52.1%) were male and 228(47.9%) were female. PPD skin tests were performed $6.2{\pm}0.5$($mean{\pm}S.D.$) months after BCG vaccination. Mean induration size was $7.3{\pm}3.2mm$ and positive conversion rate was 85.5%. Total number of BCG scars was $15.5{\pm}3.2$. Conclusion : The seroconversion rate by 2TU PPD test after percutaneous multiple puncture BCG vaccination was high. But, more comparative studies with various age groups may be needed for 2TU PPD test used as diagnostic method of tuberculosis in the hospitals.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.370-377
• /
• 2012

This study was conducted to investigate the color change of heat-treated wood made of Korean pine (Pinus koraiensis S. et Z.), and lodgepole pine (Pinus contorta Dougl). The wood samples were heat-treated at 9 different treatment combinations of temperature (170, 180, 200, 220, and $230^{\circ}C$), and time (90, 120, 180, 240, 270 min.) set up by a response surface method. Wood color was measured using a colorimeter, and the samples were installed for evaluating the resistance of termite in the field test sites set up in Jinju. The lightness decreased with the increase of treatment temperature and treatment time. The color differences were evaluated by the method of National Bureau of Standards (NBS), and response surface models to predict the color change were fitted as a function of treatment temperature and treatment time. The $R^2$ values of the fitted models of heat-treated Korean pine and lodgepole pines were 0.92, and 0.88, respectively, showing the potential way for the prediction of color changes. Severe damage was found from the samples in the field test site, which means that the manufactured heat-treated wood did not show the termite resistance enough for the outdoor use.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.323-329
• /
• 1987

Five soybean varieties of two early maturing Karikei73 and SS 79168, and three late maturing Tohoku76, Baegunkong and Jangbaegkong were used and evaluated in the study. Of the varieties examined, Karikei73 was characterized by the delayed leaf senescence. The varieties were planted in the pots of 1/3500 a filled with volcanic ash soil at the experimental fields of the National Institute of Agrobiological Resources in Japan. Major agronomic characteristics including the activity of nitrogen fixation for root nodules during the grain filling period were measured. Measurements during the stages were followed by the stage of development descriptions for soybeans made by Fehr and Carviness (1977). The acetylene reducing activity (ARA) per dry weight of root nodule measured using acetylene reduction assays was the highest at R4-R4.5 with decreasing trends thereafter for the early matruing varieties, while it continuously increased up to R6 but decreased rapidly thereafter for the late maturing varieties. The dry weights of root nodules and all parts of the host plant at each stage checked were greater in the late maturing varieties being the same in ARA per pot.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.108-114
• /
• 2002

The new system using a glow discharge atomic emission spectrometer for the direct analysis of solid samples has been developed and characterized. The system was consisted of new glow discharge cell improved previous gas-jet boosted nozzle and radio-frequency power supply. In the case of previous type glow discharge chamber, it had been fitted trace analysis of low alloy steel with low discharge power, because it was to decrease redeposition and increase sample weight loss. But it had a problem that plasma becomes unstale due to increased sample weight loss and redeposition resulting from the high discharge power. Because of being problem of previous glow discharge, it is impossible to analyze using high power. The modified gas-jet boosted glow discharge to solve this problem would improve to be less sample loss rate of modified nozzle than sample loss rate of previous nozzle on the equal discharge condition, and improve to increase stability of plasma. The effect of discharge parameters such as discharge pressure, gas flow rate and power on the sample loss rate, emission intensity has been studied to find optimum discharge conditions. The calibration curves of Fe were obtained with 3 low-alloy samples.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.382-384
• /
• 2013

We evaluated the presence of uniconazole residual pesticide in agricultural products by using multiclass pesticide multiresidue methods. Samples were collected from January to August, 2012. The pesticide was detected in 14 samples among the 3,632 samples tested. Amount of the uniconazole pesticide ranged from 0.098 to 2.2 mg/kg in the 14 samples. This method was described for the simultaneous determination of uniconazole by using gas chromatography with an electron capture detector (GC-ECD) and mass spectrometry (MS). For evaluating the GC-ECD method, uniconazole was spiked into gyeojachae at a level of 0.05, 0.5 mg/kg. The recoveries of uniconazole with the GC-ECD method ranged from 98.9-109.4%. The results indicate that our method of simultaneous analysis is applicable to uniconazole analysis.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.