DOI QR코드

DOI QR Code

열처리 조건이 목재의 색상 변화 및 흰개미 저항성에 미치는 영향

Effect of Heat Treatment Conditions on Color Change and Termite Resistance of Heat-Treated Wood

  • 나종범 (경남과학기술대학교 건설환경공과대학 인테리어재료공학과) ;
  • 김기범 (배성목재(주)) ;
  • 임경훈 (배성목재(주))
  • 투고 : 2012.09.20
  • 심사 : 2012.11.21
  • 발행 : 2012.11.25

초록

잣나무(Pinus koraiensis S. et Z.)와 로지폴소나무(Pinus contorta Dougl)를 이용하여 열처리 목재를 제조한 후 처리조건에 따른 재색변화를 조사하였다. 반응표면분석법에 따라 설정된 9가지 처리조건(처리온도 : 170, 180, 200, 220, $230^{\circ}C$, 처리시간: 90, 120, 180, 240, 270 min.)에서 열처리 시편들을 제조하였으며, 색차계를 이용하여 재색을 측정한 후 흰개미 저항성을 평가하기 위하여 진주에 설치된 흰개미 시험장에서 6개월 동안 야외노출시험을 실시하였다. 처리온도와 처리시간이 증가함에 따라 명도가 감소하였으며 감소폭은 시간보다 온도에 의한 영향이 더 큰 것으로 나타났다. 미국국립표준국(National Bureau of Standards : NBS)에서 제시된 방식에 의해 평가된 색차를 처리온도와 처리시간의 함수로 표현한 반응표면분석모델은 잣나무의 경우 $R^2$의 값이 0.92, 로지폴파인의 경우 0.88로 열처리조건에 따른 색채의 예측가능성을 보여주었다. 6개월의 야외시험결과 열처리 조건에 상관없이 흰개미 가해가 심하게 발생된 것으로 나타났는데, 이는 제조된 열처리 목재의 흰개미 저항성이 야외에 사용하기에 적합하지 않다는 것을 보여준다.

This study was conducted to investigate the color change of heat-treated wood made of Korean pine (Pinus koraiensis S. et Z.), and lodgepole pine (Pinus contorta Dougl). The wood samples were heat-treated at 9 different treatment combinations of temperature (170, 180, 200, 220, and $230^{\circ}C$), and time (90, 120, 180, 240, 270 min.) set up by a response surface method. Wood color was measured using a colorimeter, and the samples were installed for evaluating the resistance of termite in the field test sites set up in Jinju. The lightness decreased with the increase of treatment temperature and treatment time. The color differences were evaluated by the method of National Bureau of Standards (NBS), and response surface models to predict the color change were fitted as a function of treatment temperature and treatment time. The $R^2$ values of the fitted models of heat-treated Korean pine and lodgepole pines were 0.92, and 0.88, respectively, showing the potential way for the prediction of color changes. Severe damage was found from the samples in the field test site, which means that the manufactured heat-treated wood did not show the termite resistance enough for the outdoor use.

키워드

참고문헌

  1. 강호양, 이민경. 2006. 열처리에 의한 목재의 재색변화. 한국가구학회. 학술대회논문집: 75-80.
  2. 강호양. 2008. 국산 침엽수재의 재색변화 기술 개발. 한국가구학회지 19(3): 156-162.
  3. 김광모, 박정환, 박병수, 손동원, 박주생, 김운섭, 김병남, 심상로. 2009. 삼나무 열처리재의 물리 및 역학적 특성. 목재공학 37(4): 330-339.
  4. 김광모, 박정환, 박병수, 손동원, 박주생, 김운섭, 김병남, 심상로. 2010. 백합나무 열처리재의 물리 및 역학적 특성. 목재공학 38(1): 17-26. https://doi.org/10.5658/WOOD.2010.38.1.17
  5. 신랑호, 한태형, 권진헌. 2010. 국내산 활엽수 열처리재의 재색변화에 따른 목재의 특성과 생활용품 활용방안에 대한 연구. 한국가구학회지 21(1): 62-71.
  6. 윤경진, 엄창득, 박준호, 이양호, 최인규, 이전제, 여환명. 2008. 열처리와 자외선처리를 이용한 삼나무 재색제어. 목재공학 36(6): 33-40. https://doi.org/10.5658/WOOD.2008.36.6.033
  7. American Wood Protection Association. 2012. Book of Standards. Birmingham, Alabama, U. S. A.
  8. Boonstra, M. J., J. van Acker, E. Kegel, and M. Stevens. 2007. Optimisation of a two-stage heat treatment process. Durability aspects. Wood Sci. Technol. 41(1): 31-57. https://doi.org/10.1007/s00226-006-0087-4
  9. Doi, S., K. Hanata, E. Kamonji, and Y. Miyazaki. 2004. Decay and termite durabilities of heat treated wood. Document IRG/WP 04-40272. International Research Group on Wood Protection (IRG), Sweden.
  10. Hardwood review express. 2009. Market Opportunity: Heat-treated Hardwoods. Vol. 8, No. 15.
  11. Esteves, B., I. Domingos, and H. Pereira. 2007. Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200 degrees C, Forest Prod. J. 57(12): 47-52.
  12. Hillis, W. E., and A. N. Rozsa. 1985. High temperature and chemical effects on wood stability Part 3. Wood Sci. Technol. 19(2): 93-102. https://doi.org/10.1007/BF00353070
  13. Kamdem, D. P., A. Pizzi, R. Guyonnet, and A. Jermannaud. 1999. Durability of heat-treated wood. Document IRG/WP 99-40145. International Research Group on Wood Protection (IRG), Sweden.
  14. Kartal, S. N. 2006. Combined effect of boron compounds and heat treatments on wood properties: Boron release and decay and termite resistance. Holzforschung 60: 455-458.
  15. Kocaefe D., J. L. Shi, D. Q. Yang, and M. Bouazara. 2008. Mechanical properties dimensional stability, and mold resistance of heattreated jack pine and aspen. Forest Prod. J. 58(6): 88-93.
  16. Korkut, S., S. Karayilmazlar, S. Hiziroglu, and T. Sanli. 2010. Some of the properties of heat-treated sessile oak (Quercus petraea). Forest Prod. J. 60(5): 473-480. https://doi.org/10.13073/0015-7473-60.5.473
  17. Kubojima, Y., T. Okano, and M. Ohta. 2000. Bending strength and toughness of heat-treated wood. J. Wood Sci. 46: 8-15. https://doi.org/10.1007/BF00779547
  18. Mitchell, P. H. 1988. Irreversible property changes of small loblolly pine specimens heated in air, nitrogen, or oxygen. Wood and Fiber Science 20(3): 320-355.
  19. Stenudd, S. 2004. Color response in silver birch during kiln-drying. Forest Prod. J. 54(6): 31-36.
  20. Tarvainen, V., P. Saranpaa, and J. Repola. 2001. Discoloration of Norway spruce and Scots pine timber during drying. Proceedings of 7th International IUFRO Wood Drying conference July 9-13, Tsukuba, Japan: 294-299.

피인용 문헌

  1. Research Trend of The Heat-Treatment of Wood for Improvement of Dimensional Stability and Resistance to Biological Degradation vol.44, pp.3, 2016, https://doi.org/10.5658/WOOD.2016.44.3.457
  2. Influences of Termite Activities on Ecosystem Carbon Cycle: Focusing on Coarse Woody Debris Decomposition vol.105, pp.1, 2016, https://doi.org/10.14578/jkfs.2016.105.1.1