• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.207-210
• /
• 2004

단판의 차음 성능 해석에 있어서 무한판과 유한판의 가장 큰 음향학적 차이는 유한한 경계에 의해 발생하는 정재파에 있다고 할 수 있다. 하지만, 일치 주파수 이하에서는 진동 공진이 발생하더라도 음향방사효율이 비교적 작고, 따라서, 비록 그 진동 응답이 크더라도 절대적인 음향 방사 양은 작다. 이를 근거로 대부분의 유한판 해석은 비공진 성분에 국한되어 왔으나, 특정 경우 공진 투과 성분을 무시하면 해석 결과에 오차가 발생할 수 있음이 제시된 바 있다. 본 연구에서는 유한 단판의 차음 해석에 있어서 공진 투과 성분의 상대적 기여도를 수치적 해석을 통해 알아보고, 이로부터 공진 투과 성분이 해석치와 측정치 사이의 정량적 상관도에 미치는 영향을 분석하였다.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.95-100
• /
• 2008

A 4-node assumed strain finite element based on higher order shear deformation theory is developed to investigate the behaviours of symmetric and unsymmetric laminated composite plates. The present element is based on Reddy's higher order shear deformation theory so that it can consider the parabolic distribution of shear deformation through plate thickness direction. In particular, assumed strain method is adopted to alleviate the shear locking phenomena inherited plate elements based on higher order shear deformation theory. The present finite element has seven degrees of freedom per node and denoted as HSA4. Numerical examples are carried out for symmetric and unsymmetric laminated composite plate with various thickness values. Numerical results are compared with reference solutions produced by other higher order shear deformation theories.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.944-951
• /
• 1988

Global-Local Laminate Variational Model is utilized to investigate the characteristics of interlaminar stresses in thick composite laminates under uniform axial extension. Various laminates with different fiber orientation and stacking sequences are analyzed to observe the behavior of interlaminar normal stresses. From this result, the interlaminar normal stress distribution along the laminate interfaces is examined and discussed with an existing approximation model. The repeated stacking of Poisson's ratio symmetric sublaminates is found to be the best stacking method of thick composite laminates to reduce the interlaminar normal stresses for the prevention of the free-edge delamination.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.3
• /
• pp.35-40
• /
• 2010

The specially orthotropic plate theory is used for analysis of panels made of girders and cross-beams. The cross-sections of both girders and cross-beams are H-types. The results of application of this method to rolled beam bridge by using specially orthotropic plate theory is presented. The result is compared with that of the beam theory. Finite difference method is used for this purpose. The influence of the $D_{22}$ stiffness on the natural frequency is rigorously investigated. According to numerical examination given in this paper, the result by the plate theory is 2.43 times stiffer than that of beam theory.

• Composites Research
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2009

In this paper low-velocity impact response and damage of composite laminates is analytically investigated. A modified displacement field of plate considering initially loaded in-plane strain is proposed. From the displacement field a finite element equation on structural behavior of composite laminate is newly induced and a computational program is coded. Numerical results using the FEM code is compared with the numerical ones from reference. Additional numerical analysis is performed on another impact condition and effect of initial in-plane load is reviewed. Potential delamination damage area in the first inter-ply surface from bottom of laminate is approximated and effect of initial in-plane load and impact condition is also reviewed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.205-205
• /
• 2022

본 연구에서는 심해 선형파 조건에서 수중 투과성 방파제 주변의 유속장에 대해 nonhomogeneous Riemann-Hilbert problem을 이용한 해석해 및 수치해를 도출하고, 이를 반사계수와 투과계수를 산정하는 데에 활용한다. 여러 개의 얇은 투과성 판이 일렬로 배열되어 수중에 고정되어있고 규칙파가 작용하는 경우, Riemann-Hilbert problem을 정의할 수 있다. 본 연구에서는 얇은 판으로 이루어진 수중 방파제에 대한 homogeneous Riemann-Hilbert problem을 푸는 것을 넘어, 투과성 판으로 이루어진 수중 방파제에 대해 nonhomogeneous Riemann-Hilbert problem을 정의하고, 이에 대해 무한경계조건과 판 근처에서의 유속장 경계조건을 이용해 해석해를 유도하였다. 투과성 방파제의 경우 permeable boundary를 가지므로 제시한 상황은 기하학적 비선형성을 지닌다. 이에 대해 투수성을 기초로 미소 매개변수를 정의하고, 섭동법(perturbation method)을 이용해 유속장에 대한 leading order solution과 first order solution을 도출하였다. Leading order solution은 Evans (1970) 등의 선행연구에서 제시한 해와의 비교를 통해 그 타당성을 검증하였고, First order solution을 이용해 반사계수와 투과계수를 산정하여 방파제의 투수성이 유속장에 미치는 영향을 고려하였다. 아울러 수치해를 도출하여 해석해의 결과와 비교 및 분석하였다. 본 연구에서 제시한 해석해는 방파제에 가해지는 힘을 산정하는 등 다양한 방향으로 활용 가능하며, 향후 수치해나 실험값을 비교, 검증하기 위한 기초 자료로써 활용될 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.36-45
• /
• 2004

The plywood for concrete form is regarded as a laminate plate composed of orthotropic materials and the flexural analysis is conducted by applying the laminate plate theory, in which the four edges of the plate is assumed to be simply supported and the concentric point lateral load is applied. The results of flexural experiment are compared with the theoretical ones. Theoretically predicted results coincide with experimental ones up to the point of deflection less than 1/4 of plate thickness. In addition, when the plywood is regarded as an isotropic plate for simple analysis, the geometric average of the elastic modulus measured in the direction parallel to the face grain (E₁₁) and perpendicular to the face grain (E₂₂) could be used for the elastic modulus of isotropic plate.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.3
• /
• pp.241-251
• /
• 2010

This paper presents the development of a new analytical solution to the governing differential equation for isotropic annular sector plates subjected to uniform loading in a three-dimensional polar coordinate system. The 4th order governing partial differential equation (PDE) was converted to an ordinary differential equation (ODE) by assuming the Levy-type series solution form and the subsequent mathematical operations. Finally, a series-type solution was assembled with homogeneous and nonhomogeneous solution parts after operating real values and complex conjugates derived from the characteristic equation. To demonstrate the convergence rate and the accuracy of the featured method, several examples with various sector angles were selected and solved. The deflections and internal moments in the example annular sector plates that were obtained from the proposed solution were compared with those obtained from other analytical studies and numerical analyses using the finite element analysis package program, ABAQUS. Very good agreement with the results of other analytical and numerical methodologies was shown.

• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.79-86
• /
• 2014

In this paper, a stress transfer mechanism between near surface-mounted (NSM) fiber reinforced polymer (FRP) plate and concrete was investigated and a reliable analytical procedure for it was presented by using bilinear bond-slip model simulating the bond behavior of NSM FRP plate. As a result, critical values in the bi-linear model such as maximum shear strength, slip at that time and failure slip at the initiation of softening de-bonding were suggested for being used in the differential equation considering he interfacial characteristic between NSM FRP and concrete. Also, it was found that the bond-slip behavior could be suitably redicted by using the proposed procedure even in the case of various bond lengths from the comparison with bond test result.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.69-72
• /
• 2002

The interlaminar problems near the free edge of composite laminates are analyzed in this paper. CFRP specimen (［+40/-40］s) and interleaved specimen (［+40//-40］s) with non-woven carbon tissue (NWCT) are discussed under tensile loading condition. The symbol “//”means that the NWCT is located between the CFRP interfaces. The NWCT has carbon short fibers which are discretely distributed with the in-plane random orientation. It was reported/sup 3)/ that the Mode Ⅱ interlaminar fracture toughness of CFRP laminates with NWCT is increased largely and the Mode I interlaminar fracture toughness is not changed significantly. Mode Ⅲ interlaminar fracture toughness is also an important factor in composite structures. But it is not easy to experimentally investigate the Mode Ⅲ interlaminar fracture toughness. The objective of this work is to study the effect of the NWCT and to fundamentally understand the Mode Ⅲ interlaminar shear characteristics of laminated composites with NWCT in the vicinity of a free edge by using finite element method analysis.