• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1058-1060
• /
• 1995

In this paper, we studied the tracking characteristics of silicone rubbers that differed in the degree of crosslinking. As the tracking method, we adopted ASTM D 2303 and Merry-Go-Round(MGR) test method. It was found that the higher the degree of crosslinking, the better tracking characteristics. In these two test methods, specimens showed similar tendency of performance variation according to the degree of crosslinking. However the degradation phenomena were very different. As for MGR method, only the color of specimens' surface changed without any erosion or tracking path on them. On the contrary, the specimens subjected to ASTM D 2303 test method showed severe erosion.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.154-162
• /
• 1994

In this paper, a new locking protocol which can increase the concurrency in an Object Oriented Database Systems is proposed. The proposed locking protocol uses the Root object identifier to identify the root of a component object in a composite object. The transaction that requests a lock on the component object checks whether the Rid of the component object has been locked by another transaction. Even though the class of the component object is locked by one transaction, other transactions can concurrently access other instances in the class, if each Rid of them is not locked by any other transactions. This can increase the degree of concurrency.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.113-116
• /
• 2007

This is a research for evaluated recycled glass powder to add asphalt concrete filler. To make a comparative study, Mechanical performance of lime stone and slag dust Mixtures was evaluated according to test procedure. Lab. performance tests included marshall stability, indirect tensile strength, resilient modulus and wheel tracking. Water resistance tests were evaluated by marshall strength ratio and tensile strength ratio. In conclusion, Results of mechanical performance showed that recycled glass powder mixtures were equivalent to conventional mixtures. Especially, result of tensile strength ratio tested recycled glass powder mixtures was superior to conventional mixtures.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.53-58
• /
• 1998

Wheel tracking and ravelling tests were conducted on the hot mix crumb rubber modified asphalt concrete usmg waste tire t to evaluate the mechanical prope$\pi$ies in comparison with conventional asphalt concrete. According to the test results, the m modified product, lias superior to the conventional one by 50% in the resistance of permanent deformation and by 15% in the m resistance of dmability. The experimental results should recommend thut the waste tir$\xi$ is positively recycled for asphak concrete.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.1-13
• /
• 2006

This paper is one of the studies for developing new methodologies for improving performance of hot-mix recycled asphalt mixtures. The objective of this study is to evaluate rut-resistance characteristics of recycled asphalt mixture which was prepared by newly developed mixing method. The new mixing method provided more sufficient rejuvenation of old binder of reclaimed asphalt pavement (RAP), making homogeneous binder viscosity level in a recycled mixture. Two aggregates (gneiss and granite), two RAP contents (15% and 30%) and two contents (none and 6%) of polymer modifier (LDPE) were used. Recycled mixture was prepared with two methods; method A and method F. To examine difference of binder oxidation level by type of material within a recycled mixture, Gel-permeation chromatography(GPC) analysis was performed on the binders mixed with coarse aggregates and matrix separately. Laboratory tests were performed for evaluation of rut resistance characteristics of each recycled mixture and these includes wheel tracking (WT) test and Kim test. Rut depth and dynamic stability were obtained from WT test and deformation strength $(S_D)$ was obtained from Kim test. The results of regression analysis was shown that correlation $(R^2)$ of F mixing mixtures was higher than one of A mixing mixtures. Therefore, F mixing mixtures showed more consistent rut resistance than h mixing mixtures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.184-193
• /
• 2012

In this paper, a 5-bit 2-GS/s 2-way time interleaved pipeline ADC for high-speed serial link receiver is demonstrated. Implemented as a current-mode amplifier, the stage ADC simultaneously processes the tracking and residue amplification to achieve higher sampling rate. In addition, each stage incorporates a built-in 1-tap FIR equalizer, reducing inter-symbol-interference (ISI）without an extra digital post-processing. The ADC is designed in a 110nm CMOS technology. It comsumes 91mW from a 1.2-V supply. The area excluding the memory block is $0.58{\times}0.42mm^2$. Simulation results show that when equalizer is enabled, the ADC achieves SNDR of 25.2dB and ENOB of 3.9bits at 2.0GS/s sample rate for a Nyquist input signal. When the equalizer is disengaged, SNDR is 26.0dB for 20MHz-1.0GHz input signal, and the ENOB of 4.0bits.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1043-1049
• /
• 2007

Data transfer rate and storage capacity are main criteria of the performance of the optical disk drive. The highest data transfer rate and the largest storage capacity is most desirable. To increase these performances, the actuator of the optical disk drive should have a high servo bandwidth to compensate the vibration of an optical disk. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to increase the natural frequencies of the flexible modes. In this paper, we suggested a moving magnet type actuator having high frequencies of the flexible modes. Generally, the moving magnet type actuator has an advantage to increase the natural frequencies of the flexible modes because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of EM(electromagnetic) circuit cut down driving sensitivities of the actuator. To improve driving sensitivities, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, driving sensitivities and the natural frequencies of the flexible modes were improved by using DOE(design of experiments) for electromagnetic circuit and modifying the lens holder.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.31-38
• /
• 2011

As the percentage of permeable ground is reduced due to the increased impermeable roads of major cities, a heat island phenomenon can be dominantly observed, resulting in increased temperature. In addition, rainfall that would have been naturally absorbed and retained by the permeable ground is overflowed due to large volumes of run-off water, resulting in more sewer failures and increased erosion. In terms of permeable pavement system, block paving has been used anywhere as well as provides many years of service. The permeable block paving is an effective alternative to the more traditional asphalt or plain concrete for minor roads; furthermore, it looks a lot better than other pavements. In this study, the functional drainage evaluation of block paving was carried out, considering the usage of experimental sludge and wheel tracking test, in order to simulate the field condition of roads.

• Journal of Korea Game Society
• /
• v.6 no.2
• /
• pp.51-60
• /
• 2006

Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. Among them are CBA, MCBA, MVBA, PCRTT and others. But, in these algorithm, a transmission plan is made in according to stored frame sequence in these algorithms. In case that the number of bytes in frames in GOP differs greatly each other, this may cause unnecessary transmission rate changes and may require high transmission rates abruptly when frame's byte is large. In result, it is difficult to use efficient network resource. In this paper, we proposed a smoothing algorithm that find the optimal frame sequence in short time by using backtracking method and smoothing's structure for the proposed smoothing algorithm. This algorithm decides the sequence of frames which requires the lowest variance of frame's bytes in GOP and make a transmission plan. In order to show the performance, we compared with MVBA algorithm by various evaluation factors such as the number of rate changes, peak rate, rate variability.

• Journal of Internet Computing and Services
• /
• v.1 no.2
• /
• pp.11-18
• /
• 2000

In this paper we present a new extensible model based upon the concept of subtransactions in real-time transaction systems. The nested transaction model originally proposed by J. Moss is extended for real-time uniprocessor transaction systems by adding explicit timing constraints. Based upon the model, an integrated concurrency control and scheduling algorithm is developed, that not only guarantees timing constraints of a set of real-time transactions but also maintains consistency of the database. The algorithm is based on the priority ceiling protocol of Sha et al. We prove that the Real-Time Nested Priority Ceiling Protocol prevents unbounded blocking and deadlock, and maintains the serializability of a set of real-time transactions. We use the upper bound on the duration that a transaction can be blocked to show that it is possible to analyze the schedulability of a transaction set using rate-monotonic priority assignment. This work is viewed as a step toward multiprocessor and distributed real-time nested transaction systems. Also, it is possible to be extended to include the real-time multimedia transactions in the emerging web-based database application areas.