• Journal of Urban Science
• /
• v.11 no.2
• /
• pp.9-17
• /
• 2022

The purpose of this study is to develop an index for evaluating the function of a new motorway using the travel distance frequency distribution (TLFD) calculated using the vehicle travel route big data, and to overcome the limitations of the evaluation through the existing traffic volume. The mobility evaluation index of motorways was developed by applying it to the TLFD data table in 2019. The smaller the value of the mobility evaluation index of the link is calculated, the more it is a link with mainly short-distance travel, and the higher the value of the mobility evaluation index, the more it means a link with mainly long-distance travel. The accessibility evaluation index was calculated through the result of the mobility evaluation index of all motorways developed, and all motorways were grouped into three groups using K-means clustering. Group A was found to exist inside a large city and consisted of motorways with many short-distance traffic, Group B was investigated as acting as an arterial between groups, and Group C was classified as a motorway consisting mainly of long-distance traffic connecting large cities and large cities. This study is significant in developing a new motorway function evaluation index that can overcome the limitations of motorway function evaluation through the existing traffic volume. It is expected that this study can be a reasonable comprehensive indicator in the operation and planning process of motorways.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.4
• /
• pp.11-21
• /
• 2000

The travel behavior should be analysed microscopically for the traffic management of urban street. The car following theory which found out the correlation between the lead and the following vehicles is being widely used as basic data in many fields. As the vehicle position and its speed information can be received by GPS, this technique is recently applying to the various fields. For the case study the travel data were collected with two vehicles equipped with GPS receiver. The moving distance was calculated by the collected location data every 2 seconds and the speed variation was checked. And this study analysed and compared the acceleration and deceleration speed between the lead and the following vehicle. Finally, Regression model about the relationship between the acceleration and deceleration speed and the acceleration and deceleration distance was constructed. This model could be helpful for the road design and the regulation for the safe traffic management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.99-103
• /
• 2010

It is necessary to improve transfer impedance of express bus terminal users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in express bus terminal and calculated transfer impedance on major express bus terminals in Korea. The study results show that the addition of 100 meter exterior walking distance increases 3 minute travel time, 100 meter interior walking distance increases 5 minute travel time, 100 stairways increase 13 minute travel time, and escalators decreases 3 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different bus terminals and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1D
• /
• pp.11-15
• /
• 2010

It is necessary to improve transfer impedance of Urban Rail Station station users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in Urban Rail Station stations and calculated transfer impedance on major Urban Rail Station stations in Korea. The study results show that the addition of 100 meter exterior walking distance increases 2 minute travel time, 100 meter interior walking distance increases 3 minute travel time, 100 stairways increase 4 minute travel time, and escalators decreases 1 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different Urban Rail Station stations and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2007

Seoul's transportation system was changed drastically starting the first of June in two thousand. This policy includes integrated distance-based fare system and public transportation card system called smart card. Especially, as public transportation card data contains individual travel, transfer and using modes information it is possible to catch the characteristics of path-based individuals and mass transit. Thus, public transportation card data can contribute to evaluate the mass transit service in integrated public transportation networks. In addition, public transportation card data are able to help to convert previous researches and analyses with link-based trip assignment models to path-based mass transit service analysis. In this study, an algorithm being suitable for path-based trip assignment models is suggested and proposed algorithm can also contribute to make full use of public transportation card data. For this, column generation algorithm hewn to draw the stable solution is adopted. This paper uses the methodology that is to take local approximate equilibrium from partial network and expand local approximate equilibrium to global equilibrium.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2017

The compact city usually provides good accessibility of residents with multiple transportation modes. However, in a compact city, annual average of travel distance per household by car is relatively short due to more congested traffic condition and larger travel cost than disperse city. As a result, total travel demand is decreasing when the region becomes more compact. Therefore compact development is regarded as one of the sustainable choices for future urban planning in many countries. This study aims at an empirical analysis of the relationship between urban compactness and travel demand based upon land-use and travel data for city of Seoul. In this study, 424 sub-districts with the mixed land-use patterns are assessed in a hexagonal diagram. The measurement is based on the relative deviation of each sector's characteristics including numbers of residence, manufacture, and trade & service. Multiple linear regression models are developed to analyze the effects of urban compactness on zonal trip generations. As a result, the trip generation rate in the residence-intensive and mixed-use areas is found to be relatively low. Furthermore, residents in high-compact areas tend to use public transport more often than residents in less compact areas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.1-13
• /
• 2005

For integrated transit networks operated with diverse transit modes, it is difficult to find related literatures on the provision of multiple travel time routes information. This study proposes a methodology on how to select K number of least time transit routes in the integrated transit network with two modes, bus and subway. In the Proposed method, three constraints usually (will be) encountered for decision by users-(1) service time constraints of travel modes, (2) maximum payment fare constraints under the integrated distance based fare system, and (3) maximum number of transfer constraints - are taken into consideration in the searched routes. The experimental studies shows that the proposed method properly provides K number of least time routes. In addition, it somehow proves that by combinatorially considering three constraints the proposed method can be evaluated as to enlarge the quality as well as the diversity of route information demanded by users.

• Journal of Broadcast Engineering
• /
• v.25 no.1
• /
• pp.83-93
• /
• 2020

With the rapid increase of vehicles, various traffic problems, e.g., car crashes, traffic congestions, etc, frequently occur in the road environment of the urban area. To overcome such traffic problems, intelligent transportation systems have been developed with a traffic flow analysis. The traffic flow, which can be estimated by the vehicle counting scheme, plays an important role to manage and control the urban traffic. In this paper, we propose a novel vehicle counting method based on predicted centers of each lane. Specifically, the centers of each lane are detected by using the accumulated movement of vehicles and its filtered responses. The number of vehicles, which pass through extracted centers, is counted by checking the closest trajectories of the corresponding vehicles. Various experimental results on road CCTV videos demonstrate that the proposed method is effective for vehicle counting.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.103-113
• /
• 2009

Quick accident spot reaching of 119ERU is the most important role in decrease of accident depth. If 4 minutes of wounded person pass after cardiac arrest, brain damage is begun. and If 10 minutes of wounded person pass after cardiac arrest, possibility to die rises. Accordingly, when establish 119ERU, need to consider travel time to traffic accidents spot. This treatise groped a facility location problem using SCLM and minisum location problem mutually. And existent minisum location problem has a problem that maximum travel time exceed $\lambda$. ERU to need in present situation and also can reduce average travel time. so this treatise propose modified minisum location problem. In case applying modified minisum location theory, 119ERU can arrive all demand and that is optimized about demand and travel time. Can minimise figure of 119 first aids to need in present situation applying this way, and also can reduce average passing time. Finally, this way can minimise figure of 119ERU to need in present situation and also can reduce average travel time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.317-323
• /
• 2008

Mass transit information can contribute many benefits to users. Especially, transportation information technology is developing highly with information technology in Korea recently. Hereafter, it is expected to give customized transportation information to users individually with the advent of ubiquitous age in earnest. This public transportation information service can be realized by path finding algorithm in public transportation networks including travel and transfer attributes. In this research, constraints are constructed with the primary facts influencing users. Moreover, the method reducing user's path finding condition arbitrarily is proposed by making the maximum value as variables. In this study, transfer frequency, total travel time, seat confirmation, transfer time and travel time become constraint condition based on k path finding algorithm considering service time constraint condition. Moreover, case study about user customized transfer information is performed in Seoul and metropolitan subway networks.