• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11A
• /
• pp.1263-1270
• /
• 2004

A low-power 64-point FFT/IFFT processor core is designed, which is an essential block in OFDM-based wireless LAM modems. The radix-2/418 DIF (Decimation-ln-Frequency) FFT algorithm is implemented using R2SDF (Radix-2 Single-path Delay Feedback) structure. Some design techniques for low-power implementation are considered from algorithm level to circuit level. Based on the analysis on infernal data flow, some unnecessary switching activities have been eliminated to minimize power dissipation. In circuit level, constant multipliers and complex-number multiplier in data-path are designed using truncation structure to reduce gate counts and power dissipation. The 64-point FFT/IFFT core designed in Verilog-HDL has about 28,100 gates, and timing simulation results using gate-level netlist with extracted SDF data show that it can safely operate up to 50-MHz＠2.5-V, resulting that a 64-point FFT/IFFT can be computed every 1.3-${\mu}\textrm{s}$. The functionality of the core was fully verified by FPGA implementation using various test vectors. The average SQNR of over 50-dB is achieved, and the average power consumption is about 69.3-mW with 50-MHz＠2.5-V.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5A
• /
• pp.432-440
• /
• 2011

For the 4th generation mobile communication, LTE-advanced system needs the broad frequency band up to 100MHz for providing the data rate of maximum 1Gpbs. However, it is very difficult to secure the broad frequency band in the current frequency allocation situation. So, carrier aggregation was proposed as the solution, in which several fragmented frequency bands are used at the same time. Basically, multiple parallel receivers are required to get the information data from the different frequency bands but this conventional multi-chain receiver system is very inefficient. Therefore, in this paper, we like to study the single chain system that is able to receive the multi-band signals in a single receiver based on the time division multiplexing (TDM) reception method. This proposed TDM receiver efficiently manage to receive the multi-band signals in time domain and handle the baseband signals with one DSP board. However, the serious distortion could be generated by the sampling timing offset (STO) in the TDM-based system. Therefore, we like to analyze STO effects in the TDM-based system and propose a compensation method using estimated STO. Finally, it is shown by simulation that the proposed method is appropriate for the single chain receiver and show good compensation performance.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.77-87
• /
• 2008

This study is to formulate strategy for subject who are selected as national team in horizontal bars event in apparatus gymnastics. For this, skill training program was applied to players for 8 weeks. Then it was analyzed by using 3D motion Analysis system to seek the difference between before and after using the program. There were decisive demerit element K's first try for Tkatchev stretched movement from low elevation and crooked body while elevating. Not only, the location of his center of mass is far and low and there was some concern in his landing due to bended his hip-joint, but also, it exposed weak point in retro-action followed technique. Thus, to overcome that weak point, the subject repeated practices on following; when preparing for Tkatchev stretched movement at downward for big spin, make sure extend shoulder angle faster, make sure Tap movement is short and concise using hip-joint angular while delaying Tap timing for folding the body, and moreover, while backlashing the body, used shoulder joint angle wide to pull up the body. As a result, the speed of vertical upward did rut increase when separation from the bar. However, height of elevation increased that the leg would rut hit the horizontal bar even straight up the hip-joint. Therefore, the movement itself provided magnificent motion and even helped decrease the demerits.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.769-782
• /
• 2009

Stereoscopic video service is one of the most widely adopted technologies for 3-Dimensional technology. However, the stereoscopic video service has not been penetrated into the market since there does not exist a proper transmission method even though the conventional MPEG-2 Transport Stream (TS) has support for broadcast service of mono-scopic video contents. This is partly because the MPEG-2 TS does not support displaying a stereoscopic video content which consists of several composition types widely used in the market. This paper proposes the new MPEG-2 TS specification suitable for transmitting and displaying stereoscopic video contents. In order to show feasibility of the proposal, this paper describes an end-to-end system which is implemented with consideration of the method how to multiplex and de-multiplex stereoscopic video contents as well as keeping backward compatibility with the traditional MPEG-2 TS.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.89-101
• /
• 2015

This paper proposes a statistical model of 3-D positions when tracking moving targets using the uncooled infrared (IR) stereo camera system. The proposed model is derived from two errors. One is the position error which is caused by the sampling pixels in the digital image. The other is the timing jitter which results from the irregular capture-timing in the infrared cameras. The capture-timing in the IR camera is measured using the jitter meter designed in this paper, and the observed jitters are statistically modeled as Gaussian distribution. This paper derives an integrated probability distribution by combining jitter error with pixel position error. The combined error is modeled as the convolution of two error distributions. To verify the proposed statistical position error model, this paper has some experiments in tracking moving objects with IR stereo camera. The 3-D positions of object are accurately measured by the trajectory scanner, and 3-D positions are also estimated by stereo matching from IR stereo camera system. According to the experiments, the positions of moving object are estimated within the statistically reliable range which is derived by convolution of two probability models of pixel position error and timing jitter respectively. It is expected that the proposed statistical model can be applied to estimate the uncertain 3-D positions of moving objects in the diverse fields.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.53-61
• /
• 2012

This paper proposes a real-time distance measurement system of high temperature and high speed target using infrared stereo camera. We construct an infrared stereo camera system that measure the difference between target and background temperatures for automatic target measurement. First, the proposed method detects target region based on target motion and intensity variation of local region using difference between target and background temperatures. Second, stereo matching by left and right target information is used to estimate disparity about real-time distance of target. In the proposed method using infrared stereo camera system, we compare distances in three dimension trajectory measuring instrument and in infrared stereo camera measurement. In this experiment from three video data, the result shows an average 9.68% distance error rate. The proposed method is suitable for distance and position measurement of varied targets using infrared stereo system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.64-72
• /
• 2012

Synchronization including timing recovery, frequency offset compensation, and frame synchronization is most important signal processing block in all wireless/wired communication systems. In most communication systems, synchronization schemes based on training sequences or preambles are used. WLAN standards of 802.11a/g/n released by IEEE are based on OFDM systems. OFDM systems are known to be much more sensitive to frequency and timing synchronization errors than single carrier systems. A loss of orthogonality between the multiplexed subcarriers can result in severe performance degradations. The starting position of the frame and the beginning of the symbol and training symbol can be estimated using correlation methods. Correlation processing functionality is usually complex because of large number of multipliers in implementation especially when the reference signal is non-binary. In this paper, a simple correlation based synchronization scheme is proposed for IEEE 802.11a/g/n systems. Existing property of a periodicity in the training symbols are exploited. Simulation and implementation results show that the proposed method has much smaller complexity without any performance degradation than the existing schemes.

• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.16-24
• /
• 2012

In the present study, a gamma-ray detector and associated signal processing circuit was developed for a side-absorber of a dual-mode Compton camera. The gamma-ray detector was made by optically coupling a CsI(Tl) scintillation crystal to a silicon photodiode. The developed signal processing circuit consists of two parts, i.e., the slow part for energy measurement and the fast part for timing measurement. In the fast part, there are three components: (1) fast shaper, (2) leading-edge discriminator, and (3) TTL-to-NIM logic converter. AC coupling configuration between the detector and front-end electronics (FEE) was used. Because the noise properties of FEE can significantly affect the overall performance of the detection system, some design criteria were presented. The performance of the developed system was evaluated in terms of energy and timing resolutions. The evaluated energy resolution was 12.0% and 15.6% FWHM for 662 and 511 keV peaks, respectively. The evaluated timing resolution was 59.0 ns. In the conclusion, the methods to improve the performance were discussed because the developed gamma-ray detection system showed the performance that could be applicable but not satisfactory in Compton camera application.

• Journal of Life Science
• /
• v.25 no.11
• /
• pp.1304-1310
• /
• 2015

The period circadian clock gene 3 (PER3) plays a role in the mammalian circadian clocksystem. A regular exercise regime may affect the PER3 transcription in skeletal muscle. Although the effects of day length on circadian and circannual processes are well established in humans and mice, the influence of exercise on these processes in the horse has not been investigated. The present study investigated the expression of the PER3 gene following exercise in a thoroughbred breed of Korean horse. In addition, a comprehensive in silico nonsynonymous single nucleotide polymorphism (nsSNP) analysis of the horse PER3 gene and predicted effects of nsSNPs on proteins were examined. The expression of PER3 in skeletal muscle was significantly upregulated after exercise. Four nsSNPs were functionally annotated and analyzed by computational prediction. The total free energy and RMSD values of PER3 gene showed causative mutations. The results showed that nsSNP s395916798 (G72R) was associated with residues that have stabilizing effects on structure and function of PER3 gene. This study documented role of PER3 gene in phenotypic adaptation related to exercise in skeletal muscle. Further, the SNPs in PER3 could serve as useful biomarkers of early recovery after exercise in racehorses.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.129-136
• /
• 2007

In this paper, a simple but effective Dataline Redundancy Circuit (DRC) is proposed for a dual-port 1T-SRAM embedded in Display ICs. The DRC designed in the dual-port $320{\times}120{\times}18$-bit 1T-SRAM is verified in a 0.18-um CMOS 1T-SRAM process. In the DRC, because its control logic circuit can be implemented by a simple Shift Logic Circuit (SLC) with only an inverter and a NAND that is much simpler than the conventional, it can be placed in a pitch as narrow as a bit line pair. Moreover, an improved version of the SLC is also proposed to reduce its worst-case delay from 12.3ns to 5.9ns by 52%. By doing so, the timing overhead of the DRC can be hidden under the row cycle time because switching of the datalines can be done between the times of the word line setup and the sense amplifier setup. The area overhead of the DRC is estimated about 7.6% in this paper.