• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1332-1340
• /
• 2007

This paper describes an efficient hardware design of key wrap/unwrap algorithm for security layer of WiBro system. The key wrap/unwrap core (WB_KeyWuW) is based on AES (Advanced Encryption Standard) algorithm, and performs encryption/decryption of 128bit TEK (Traffic Encryption Key) with 128bit KEK (Key Encryption Key). In order to achieve m area-efficient implementation, two design techniques are considered; First, round transformation block within AES core is designed using a shared structure for encryption/decryption. Secondly, SubByte/InvSubByte blocks that require the largest hardware in AES core are implemented by using field transformation technique. As a result, the gate count of the WB_KeyWuW core is reduced by about 25% compared with conventional LUT (Lookup Table)-based design. The WB_KeyWuW con designed in Verilog-HDL has about 14,300 gates, and the estimated throughput is about $16{\sim}22-Mbps$ at 100-MHz@3.3V, thus the designed core can be used as an IP for the hardware design of WiBro security system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.393-396
• /
• 2009

This paper describes a design of variable-length FFT/IFFT processor for OFDM-based communication systems. The designed FFT/IFFT processor adopts the in-place single-memory architecture, and uses a hybrid structure of radix-4 and radix-2 DIF algorithms to accommodate FFT lengths of $N=64{\times}2^k$ ($0{\leq}k{\leq}7$). To achieve both memory size reduction and the improved SQNR, a two-step conditional scaling technique is devised, which conditionally scales the intermediate results of each computational stage. The performance analysis results show that the average SQNR's of 64~8,192-point FFT's are over 60-dB. The processor synthesized with a $0.35-{\mu}m$ CMOS cell library can operate with 75-MHz@3.3-V clock, and 64-point and 8,192-point FFT's can be computed in $2.55-{\mu}s$ and $762.7-{\mu}s$, respectively, thus it satisfies the specifications of wireless LAN, DMB, and DVB systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.875-880
• /
• 2019

A RC4 stream cipher is widely used for security applications such as IEEE 802.11 WEP, IEEE 802.11i TKIP and so on, because it can be simply implemented to dedicated circuits and achieve a high-speed encryption. RC4 is also used for systems with limited resources like IoT, but there are performance limitations. RC4 consists of two stages, KSA and PRGA. KSA performs initialization and randomization of S-box and K-box and PRGA produces cipher texts using the randomized S-box. In this paper, we initialize the S-box and K-box in the randomization of the KSA stage to reduce the initialization delay. In the randomization, we use clusters to process swap operation between elements of S-box in parallel and can generate two cipher texts per clock. The proposed RC4 cipher hardware can initialize S-box and K-box without any delay and achieves about 2 times to 6 times improvement in KSA randomization and key stream generation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.119-131
• /
• 2018

The increase of high-resolution spatial data and methodological developments in recent years has enabled a detailed analysis of individual experiences in space and over time. However, despite the increasing availability of data and technological advances, such individual-level analysis is not always possible in practice because of its computing requirements. To overcome this limitation, there has been a considerable amount of research on the use of high-performance, public cloud computing platforms for spatial analysis and simulation. The purpose of this paper is to empirically evaluate the efficiency and effectiveness of spatial analysis in cloud computing platforms. We compare the computing speed for calculating the measure of spatial autocorrelation and performing geographically weighted regression analysis between a local machine and spot instances on clouds. The results indicate that there could be significant improvements in terms of computing time when the analysis is performed parallel on clouds.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.886-895
• /
• 2018

This paper describes a hardware design of the Secure Hash Algorithm-3 (SHA-3) hash functions that are the latest version of the SHA family of standards released by NIST, and an implementation of ARM Cortex-M0 interface for security SoC applications. To achieve an optimized design, the tradeoff between hardware complexity and performance was analyzed for five hardware architectures, and the datapath of round block was determined to be 1600-bit on the basis of the analysis results. In addition, the padder with a 64-bit interface to round block was implemented in hardware. A SoC prototype that integrates the SHA-3 hash processor, Cortex-M0 and AHB interface was implemented in Cyclone-V FPGA device, and the hardware/software co-verification was carried out. The SHA-3 hash processor uses 1,672 slices of Virtex-5 FPGA and has an estimated maximum clock frequency of 289 Mhz, achieving a throughput of 5.04 Gbps.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1092-1095
• /
• 2019

In this paper, we propose the development of an embedded board for construction of smart factory. The proposed embedded board for construction of smart factory consists of main module, ADC module, I/O module. Main module is a main calculating device which includes communication pard that allows interface with external device with using industrial protocol and is ported operating system makes board operating into. ADC module takes part in transferring digital signal has converted from electrical signal to the main module from the external sensor which is installed on the field. I/O module is an input and output module which transfers to the main module about a status, alarm, command signal of field device and it has a function that blocks external noises from field device with isolation circuit into it. In order to evaluate the performance of the proposed embedded board for construction of smart factory, it has been tested by an authorized testing institute. As a result, quantity of interacting protocol was 5, speed of hardware clock synchronization was under 10us and operating time of battery without source power was over 8 hours. It produced the same result as the world's highest level.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.58-67
• /
• 2019

A design of an elliptic curve cryptography (ECC) processor that supports both pseudo-random curves and Koblitz curves over $GF(2^m)$ defined by the NIST standard is described in this paper. A finite field arithmetic circuit based on a word-based Montgomery multiplier was designed to support five key lengths using a datapath of fixed size, as well as to achieve a lightweight hardware implementation. In addition, Lopez-Dahab's coordinate system was adopted to remove the finite field division operation. The ECC processor was implemented in the FPGA verification platform and the hardware operation was verified by Elliptic Curve Diffie-Hellman (ECDH) key exchange protocol operation. The ECC processor that was synthesized with a 180-nm CMOS cell library occupied 10,674 gate equivalents (GEs) and a dual-port RAM of 9 kbits, and the maximum clock frequency was estimated at 154 MHz. The scalar multiplication operation over the 223-bit pseudo-random elliptic curve takes 1,112,221 clock cycles and has a throughput of 32.3 kbps.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.15-25
• /
• 2002

In this paper a design of high performance cryptographic processor which implements AES Rijndael algorithm is described. To eliminate performance degradation due to round-key computation delay of conventional processor, the on-the-fly precomputation of round key based on modified round structure is adopted. And on-the-fly round key generator which supports 128, 192, and 256-bit key has modular structure. The designed processor has iterative structure which uses 1 clock cycle per round and supports three operation modes, such as ECB, CBC, and CTR mode which is a candidate for new AES modes of operation. The cryptographic processor designed in Verilog-HDL and synthesized using 0.251$\mu\textrm{m}$ CMOS cell library consists of about 51,000 gates. Simulation results show that the critical path delay is about 7.5ns and it can operate up to 125Mhz clock frequency at 2.5V supply. Its peak performance is about 1.45Gbps encryption or decryption rate under 128-bit key ECB mode.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.69-74
• /
• 2021

This paper introduces a low-power voltage-controlled oscillator(VCO) with filters that consist of resistors and capacitors. The proposed VCO contains a 5-stage current mode buffer, and each buffer cell has a resistor-capacitor filter that connects input and output terminals. The filter adds a zero to the buffer cell. Because the zero moves the oscillation condition to high frequencies, the proposed VCO can generate a high frequency clock with low power consumption. The proposed circuit has been designed with 0.18 ㎛ CMOS process. The power consumption is 9.83 mW at 2.7 GHz. The proposed VCO shows 3.64 pJ/Hz in our simulation study, whereas the conventional circuit shows 4.79 pJ/Hz, indicating that our VCO achieves 24% reduction in power consumption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1609-1617
• /
• 2019

Described in this paper is a design of hardware accelerator for implementing public-key cryptographic protocols (PKCPs) based on Elliptic Curve Cryptography (ECC) and RSA. It supports five elliptic curves (ECs) over GF(p) and three key lengths of RSA that are defined by NIST standard. It was designed to support four point operations over ECs and six modular arithmetic operations, making it suitable for hardware implementation of ECC- and RSA-based PKCPs. In order to achieve small-area implementation, a finite field arithmetic circuit was designed with 32-bit data-path, and it adopted word-based Montgomery multiplication algorithm, the Jacobian coordinate system for EC point operations, and the Fermat's little theorem for modular multiplicative inverse. The hardware operation was verified with FPGA device by implementing EC-DH key exchange protocol and RSA operations. It occupied 20,800 gate equivalents and 28 kbits of RAM at 50 MHz clock frequency with 180-nm CMOS cell library, and 1,503 slices and 2 BRAMs in Virtex-5 FPGA device.