• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.24-30
• /
• 2010

An accurate information of the autoignition temperature(AIT) is important in developing appropriate prevention and control measures in industrial fire. This study measured the AITs of trichlorosliane and dichlosilane(DCS)-trichlorosliane(TCS) mixtures by using ASTM E659-78 apparatus. The experiment AITs of trichlorosliane, TCS(90wt%)-DCS(10wt%) and the TCS(70wt%)-DCS(30wt%) were $225^{\circ}C,\;250^{\circ}C\;and\;236^{\circ}C$, respectively.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.107-113
• /
• 2015

The effects of silica-silane in CIIR vibration isolation compound were investigated regarding mechanical and dynamic properties. Addition of silica-silane in the compound resulted in higher tear resistance strength and elongation at break than the control, which was increased by 13% and 14%, respectively. Other values such as tensile strength and hardness did not show significant changes. Viscoelastic property results supported that the improvement of tear resistance strength and elongation at break resulted from the formation of 3-dimensional network structure between silica and CIIR. The mechanism of the tear resistance strength and elongation at break improvement was discussed.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.3-9
• /
• 2004

Silane modified perfluoropolyethers (SPFPE) was synthesized as a self-assembled mono-layers (SAMs) thin film for micro-electro mechanical system (MEMS). SPFPE was compared to the Perfluoropolyethers (PFPE) as well as octadecyltrichlorosilane (OTS) and perfluorooctyltrichlorosilane (FOTS) with respect to the development of hydrophobicity in the SAMs surface. SPFPE shows less hydrophobicity than those of OTS and FOTS. Thermal annealing of SPFPE SAMs resulted in the enhancement of hydrophobicity as much as those of OTS and FOTS. The SAMs formed from SPFPE were found to be similar as OTS and FOTS SAMs with smooth R$\sub$a/ values of 0.3 nm. However, the flexible chain mobility of SPFPE resulted in 50% reduction as much as the fiction force in OTS.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.555-561
• /
• 2003

The self-assembled monolayer coating of octadecyltrichlorosilane (OTS) on the silicon based MEMS was investigated and surface characteristics were considered as a function of coating conditions and reagent composition. The sulfuric peroxide mixture (SPM) solution was used to form -OH group which caused the hydrophilic characteristic on silicon surftce. Highest hydrophilicity was obtained by SPM solution with 85% acid content at room temperature. OTS was applied on the silicon surface by means of self-assembled monolayers (SAMs) coating. It was found that sol-gel reaction was took place between -OH group on the silicon surface and -Cl group in OTS. As a result, the contact angle increased due to the increase of hydrophobicity by Si-O bonding of SAMs. Sol-gel reaction could be controlled by coating conditions as well as reagent composition in OTS coating solution.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.489-497
• /
• 1995

The DDS((CH3)2SiCl2)＋H2 gas mixture, where C atoms exist in excess in the molecules, was used for chemical vapor deposition of SiC in order to prevent codeposition of free Si in MTS(Ch3SiCl3)＋H2 system. The deposition rate was more rapid than MTS, however differ from that of MTS, it decreased after shwoing a maximum at 140$0^{\circ}C$. The stoichiometry was highly improved by using the DDS as a precursor, although there exist a little pyrolytic C at 150$0^{\circ}C$. The preferred orientation was (220) in MTS, however, it changed to (111) in DDS. The microstructure of the layer deposited at lower temperature were dense, however it grew coarse with the increase in the temperature.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.89-93
• /
• 2004

Sulfonated polysulfone (SPSF) with poly(phenylmethyl silsesquioxane, PPSQ) composite polymer electrolyte membranes were prepared and their proton conductivity, water uptake and methanol permeability of membranes were characterized. By controlling the ratio of $(CH_3)_3SCI\;and\;CISO_3H$ and reaction time, SPSF with $37\~75\%$ degree of sulfonation were synthesized. The increase of sulfonate groups in the base polymer resulted in the increase of the water uptake in the membranes as well as methanol permeability. Composite membranes were prepared by casting of DMF solution of SPSF and PPSQ. The proton conductivity of the composite membrane at room temperature was $2.8\times10^{-3}\~4.9\times10^{-2}S/cm.$ The increase of PPSQ contents in composite membranes resulted in a decrease in water uptake and methanol permeability. Composite membranes containing $5\%$ PPSQ did not make a significant effect on the proton conductivity nO methanol permeability compared with that of pristine SPSF, but a significant decrease of water uptake was observed.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.260-270
• /
• 2017

Zirconia has white color and physical, chemical stability, also using in high temperature materials and various industrial structural ceramics such as heat insulating materials and refractories due to their low thermal conductivity, excellent strength, toughness, and corrosion resistance. If hydrophobically modified zirconia is introduced into a hydrophobic acrylate coating solution, the hardness, chemical, electrical, and optical properties will be improved due to the better dispersibility of inorganic particle in organic coating media. Thus, we introduced $-CH_3$ group through silylation reaction using either trimethylchlorosilane(TMCS) or hexamethyldisilazane(HMDZ) on zirconia surface. The $Si-CH_3$ peaks derived from TMCS and HMDZ on hydrophobically modified zirconia surface was confirmed by FT-IR ATR spectroscopy, and introduction of silicon was confirmed by FE-SEM/EDS and ICP-AES. In addition, the sedimentation rate result in acrylate monomer of the modified zirconia showed the improved dispersibility. Comparison of the sizes of a pristine and the modified zirconia particles, which were clearly measured not by the normal microscope but by particle size analysis, provided a pulverizing was occurred by physical force during the silylation process. From the BET analysis data, the specific surface area of zirconia was approximately $18m^2/g$ and did not significantly change during modification process.

• Composites Research
• /
• v.31 no.2
• /
• pp.43-50
• /
• 2018

The effects of deposition temperature on chemical vapor deposited silicon carbide (CVD-SiC) were studied to obtain high deposition rates and excellent bending strength characteristics. Silicon carbide prepared at $1250{\sim}1400^{\circ}C$ using methyltrichlorosilane(MTS : $CH_3SiCl_3$) by hot-wall CVD showed deposition rates of $95.7{\sim}117.2{\mu}m/hr$. The rate-limiting reaction showed the surface reaction at less than $1300^{\circ}C$, and the mass transfer dominant region at higher temperature. The activation energies calculated by Arrhenius plot were 11.26 kcal/mole and 4.47 kcal/mole, respectively. The surface morphology by the deposition temperature changed from $1250^{\circ}C$ pebble to $1300^{\circ}C$ facet structure and multi-facet structure at above $1350^{\circ}C$. The cross sectional microstructures were columnar at below $1300^{\circ}C$ and isometric at above $1350^{\circ}C$. The crystal phases were all identified as ${\beta}$-SiC, but (220) peak was observed from $1300^{\circ}C$ or higher at $1250^{\circ}C$ (111) and completely changed to (220) at $1400^{\circ}C$. The bending strength showed the maximum value at $1350^{\circ}C$ as densification increased at high temperatures and the microstructure changed from columnar to isometric. On the other hand, at $1400^{\circ}C$, the increasing of grain size and the direction of crystal growth were completely changed from (111) to (220), which is the closest packing face, so the bending strength value seems to have decreased.