• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.55-60
• /
• 2012

Longitudinal transmission-line modal theory is applied to analyze maximum power transfer in plasmonic grating-assisted directional couplers (P-GADC) based on silicon waveguide. By defining a coupling efficiency amenable to rigorous analytical solutions and interference between even and odd modes, the power exchange of TE modes as a function of propagation distance is evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}=10.26{\mu}m$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition or minium gap condition of GADC.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.3
• /
• pp.22-35
• /
• 1994

To improve the bandwidth efficiency in the environment of digital mobile communications, a correlative coded FM system is designed. The signal of this system has continuous phase and high power efficiency due to the constant envelope. But this signal also has a little loss of the SNR and some degradation of the BER. In this paper, a modified MLSE method which uses correlative coded signal is adopted to improve the performance of the receiver. The MLSE method improved the BER performance in the used channel. Without the decision feedback, the receiver performance was improved by 2dB and with it, by 4dB Particularly, the MLSE method and the decision feedback showed better performance in bad channels than in a stable telephone channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.826-831
• /
• 2008

This paper presents hybrid antenna(HA) design based on shaped reflector for mobile satellite communication. HA is composed of a shaped reflector and a feeder having $1{\times}8$ linear phased array, and reflector shaping method is applied for the performance optimization with minimum aperture size. And, in the feeder design, HA has another merit to minimize the manufacturing cost by optimizing the number of element. Proposed HA is designed at Ka-band and can electrically control a beam pattern within ${\pm}3^{\circ}$ in the basic angle of $+45^{\circ}$ in elevation. This antenna is designed to meet ITU-R S.465-5 for beam pattern including side-lobe level.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1145-1157
• /
• 1999

본 논문에서는 RFC 2022에서 제안한 MARS 모델을 기반으로 하여 단일 대규모 클러스터를 가지는 ATM 망에서 다중의 멀티캐스팅 서버(MCS)를 이용한 멀티캐스팅 방안을 제안하고 그 성능을 평가하였다. 클러스터 내의 한 ATM 호스트가 특정 IP 멀티캐스트 그룹에 가입할 경우 ATM 호스트의 위치와 이미 존재하는 멀티캐스팅 서버들 사이의 전송 지연을 고려하여 가능한 한 종단간 전송 지연을 최소화하는 멀티캐스팅 서버를 선택하는 방안을 기술하였다. 이 방안은 최단거리 경로 알고리즘(shortest path algorithm)에 기반하여 최적의 MCS를 선정하고 송수신자 사이의 최소 지연을 가지는 멀티캐스트 트리를 구성한다. 다양한 망 위상에서 MCS의 분포 패턴을 다르게 할 경우에도 이 방안은 멀티캐스트 트리의 평균 전달 지연을 줄이는 것을 시뮬레이션을 통하여 확인하였다.Abstract In this paper, we proposed a scheme to support multiple MCSs over a single and large cluster in ATM networks, evaluated its performance by simulation. When an ATM host requests joining into a specific multicast group, the MARS designate a proper MCS among the multiple MCSs for the group member to minimize the average path delay between the sender and the group members. This scheme constructs a multicast tree through 2-phase partial multicast tree construction based upon the shortest path algorithm.We reduced the average path delay in multicast tree using our scheme under various cluster topologies and MCS distribution scenarios.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.451-458
• /
• 2011

Maximally flat (MAXFLAT) FIR filter design provides the advantage of giving a closed-form solution, but there still remains a problem of exactly and efficiently choosing the order of flatness for the accurate design of filters. This paper provides, through the modeling and analysis of a frequency-domain error function in the closed-form solution, how to determine the order of flatness. A proposed method, based on the frequency-domain error function, is accomplished by computing a minimum distance between its peak frequency and specified cutoff frequency. It is also shown that the proposed scheme is computationally efficient and accurate than the empirical formula given by Herrmann.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.653-662
• /
• 1999

In this paper, subharmonically injection locked oscillator(SILO) was designed and measured. SILO with series feedback was designed using Two Signal Method(TSM). The free-running oscillator frequency was 9.4 GHz with 6 dBm output power. In case of injection, the multiplied injected signal locked the free-running frequency. The locked signal output power was higher than any other spurious response at least 40 dB. The locking range was 220MHz (second subharmonic locking), 100 MHz(4th subharmonic locking), and phase noise was -111 dBc/Hz, -104 dBc/Hz at 100kHz offset, respectively.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.693-696
• /
• 2011

본 논문에서는 레벨셋 방법을 이용하여, 소음을 차단하기 위한 음향 구조물의 형상 최적 설계를 수행하였다. 음향 결정 구조에서는 음향이 흩어져 있는 결정 구조에 의해서 굴절되기 때문에 결정 모양을 조정함으로써, 음향 거동을 제어 할 수 있다. 형상 최적 설계의 목적은 특정한 각도와 각속도로 입사되는 입사파에 대해서 음향 투과율(acoustic transmittance)이 최소가 되도록 음향 결정의 형상(inclusion shape)을 결정하는 것이다. 음향 압력(acoustic pressure)은 주기성을 갖는 음향 결정에 대해서 헬몰츠(Helmoltz)형태의 지배 방정식을 풀어서 얻을 수 있다. 본 연구에서는 음향 구조물로 결정이 수평 방향으로는 주기적으로 무한히 분포하고 수직방향으로는 유한한 층간 구조를 가지고 있는 소음 방어벽 (Noise barrier)을 고려한다. 결정의 위치는 고정되어 있고, 결정의 형상을 설계 변수로서 음파의 거동을 제어할 수 있도록 하였다. 주기적 구조물을 고려하기 때문에 결정의 좌와 우에 Bloch 이론을 적용해 주기적 경계조건을 부과하였고, 소음 방어벽 위와 아래에는 임피던스 행렬(impedance matrix)를 이용하여, 무한 균질 영역과 소음 방어벽사이의 음파 투과를 모사하였다. 복잡한 형상 변화를 표현하기 위해 임시적 경계를 이용한 레벨셋 방법을 사용하였다. 설계 민감도 해석을 통해 목적함수가 감소하는 방향으로 경계에서의 수직 벡터를 계산하고, 이를 헤밀턴-자코비(Hamilton-Jacob) 방정식에 대입하여, 최적의 형상을 나타내는 레벨셋 함수를 구하였다.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.8-13
• /
• 2018

This paper presents a phase portrait analysis-based safety control algorithm for excavators, using adaptive sliding mode control. Since working postures and material types cause the excavator's rotational inertia to vary, the rotational inertia was estimated, and this estimation was used to design an adaptive sliding mode controller for collision avoidance of the excavator. In order to estimate the rotational inertia, the recursive least-squares estimation with multiple forgetting was applied with the information of the swing velocity of the excavator. For realistic evaluation, an actual working scenario-based performance evaluation was conducted. Based on the estimated rotational inertia and an analysis of estimation errors, sliding mode control inputs were computed. The actual working scenario-based performance evaluation of the designed safety algorithm was conducted, and the results showed that the developed safety control algorithm can efficiently avoid a collision with an object in consideration of rotational inertia variations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.73-81
• /
• 2000

This paper presents the design and simulation of a power and area efficient interpolation FIR filter with partitioned look up table (LUT) structure. Using the symmetry of the filters coefficients and the contents of the LUT, the area of the proposed filter is minimized. The two filters share the partitioned LUT and activate the LUT selectively to realize the low power operation. The proposed filter has been designed in a 5.0 Volts 0.6${\mu}m$ CMOS technology. Power consumption results have been obtained from Powermill simulations. Experimental results suggest that the proposed filter reduces both the power consumption by 28% and simultaneously the gate area by 5% simultaneously compared to the previously proposed filters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.22-28
• /
• 2008

It proposes the novel design conditions to maximize the power coupling of active directional couplers with mismatched access guides. To verify the validity and accuracy of the conditions proposed, a new coupling efficiency is defined and it depends on the reflection coefficients occurred at the discontinuous input/output interfaces. The numerical results reveal that the phase-matched condition and the minimum-gap condition for those couplers are no longer suitable to optimize the design parameters and a new criterion is needed.