• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1461-1464
• /
• 2019

In this paper, we propose the development of embedded board for integrated radiation exposure protection fireman's life-saving alarm capable of location tracking and radiation measurement. The proposed techniques consist of signal processing unit, communication unit, power unit, main control unit. Signal processing units apply shielding design, noise reduction technology and electromagnetic wave subtraction technology. The communication unit is designed to communicate using the wifi method. In the main control unit, power consumption is reduced to a minimum, and a high performance system is formed through small, high density and low heat generation. The proposed techniques are equipment operated by exposure to poor conditions, such as disaster and fire sites, so they are designed and manufactured for external appearance considering waterproof and thermal endurance. The proposed techniques were tested by an authorized testing agency to determine the effectiveness of embedded board. The waterproof grade has achieved the IP67 rating, which can maintain stable performance even when flooded with water at the disaster site due to the nature of the fireman's equipment. The operating temperature was measured in the range of -10℃ to 50℃ to cope with a wide range of environmental changes at the disaster site. The battery life was measured to be available 144 hours after a single charge to cope with emergency disasters such as a collapse accident. The maximum communication distance, including the PCB, was measured to operate at 54.2 meters, a range wider than the existing 50 meters, at a straight line with the command-and-control vehicle in the event of a disaster. Therefore, the effectiveness of embedded board for embedded board for integrated radiation exposure protection fireman's life-saving alarm has been demonstrated.

• Journal of KIISE:Software and Applications
• /
• v.37 no.12
• /
• pp.909-918
• /
• 2010

To analyze the national competitiveness of Korea leads to the conclusion that global high-tech enterprises have been playing leading and pulling roles in making Korea in line with advanced countries even though the country is lacking in various natural resources. The characteristics of these companies above are as follows; Firstly, these enterprises continue to accumulate core technologies and know-how with highly competent human resources and well-organized management. Secondly, they are well structured and equipped with information technology infrastructures which are, for example, ERP, SCM, CRM, and PLM. Among them PLM is considered to be the principal core information technology infra in manufacturing industry. The urgent task of manufacturing industry recently is to develop new products to accept various needs of consumers, and to launch the products in time to market, which requires the manufactures to be equipped with product development infra and system to upgrade product fulfillment and mass production system in a short period. The introduction of PLM System is a solution of core strategy as a manufacturer for collaboration, global development, reengineering of manufacturing system, the innovation and efficiency of manufacturing process, and product quality improvement. The purpose of this study is to analyze the success factors of introducing PLM System and its practicing effectiveness. And the results of empirical study are as follows; (1) Technical success factors positively impact system quality and user satisfaction, (2) Organizational success factors positively impact system quality, but does not impact user satisfaction, (3) Environmental success factors positively impact system quality and user satisfaction, (4) System quality positively impacts user satisfaction, (5) User satisfaction positively impacts the effectiveness of implementing PLM systems, but system quality does not impact it.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.135-135
• /
• 2018

천이금속 질화물 코팅은 우수한 기계적 특성들로 인해 공구 코팅으로 많이 사용 되어왔다. 그 중에서도 특히 Cr계 경질 코팅은 높은 경도와 낮은 표면조도, 우수한 마찰특성 등 뛰어난 기계적 특성을 나타내므로 공구 코팅으로의 적용 가능성이 크다. 그러나 최근 공구산업의 발전으로 인해 공구가 더욱 가혹한 환경에서 사용됨에 따라, 공구의 수명을 향상시키고 보호하기 위해 코팅의 높은 밀착력이 요구되고 있으며, 모재와 코팅 사이에 중간층을 합성함으로써 공구의 밀착력을 향상시키는 연구가 활발히 진행되고 있다. 이전 연구에서 모재/중간층/코팅간의 경도와 탄성계수 비율(H/E ratio)의 구배가 코팅의 밀착력에 큰 영향을 미치는 것으로 확인되었다. 그러므로, WC 모재와 Cr계 코팅의 중간값의 H/E ratio를 갖는 중간층의 합성을 통해 코팅의 밀착력을 향상시킬 수 있을 것으로 판단된다. 본 연구에서는, 코팅의 밀착력을 향상시키기 위해 다양한 중간층을 증착한 CrZrN, CrAlN 코팅을 비대칭 마그네트론 스퍼터링 장비를 이용하여 합성하였다. 모재로는 디스크 형상의 WC-6wt.%Co 시편을 사용하였고 Cr, Zr, Si, Al single 타겟을 이용하여 Cr, CrN, CrZrN, CrZrSiN 등의 중간층이 증착된 코팅을 합성했다. 코팅의 합금상, 경도 및 탄성계수, 미세조직 및 조성, 표면 조도을 확인하기 위해 X-ray diffractometer (XRD), Fischer scope, field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), atomic force microscopy를 사용하였고, 코팅의 밀착 특성을 분석하기 위해 scratch tester와 optical microscopy (OM)를 이용하였다. 코팅의 내열성을 확인하기 위해 코팅을 furnace에 넣어 공기중에서 500, 600, 700, 800, 900, $1,000^{\circ}C$로 30분 동안 annealing 한 후에 nano-indentation을 사용하여 경도를 측정하였다. CrZrN 및 CrAlN 코팅을 나노 인덴테이션으로 분석한 결과, 모든 코팅의 경도(33.4-35.8 GPa)와 탄성계수(384.1-391.4 GPa)는 중간층의 종류에 상관없이 비슷한 값을 보인 것으로 확인됐다. 그러나, 코팅의 마찰계수는 중간층의 종류에 따라 다른 값을 보였다. CrZrN 코팅의 경우 CrN 합금상 중간층을 갖을 때 가장 낮은 값을 보였으며, CrAlN 코팅의 경우 CrN/CrZrSiN 중간층을 증착하였을때 마찰계수는 0.34로 CrZrN 중간층을 증착하였을 때(0.41)에 비해 낮은 값을 보였다. 또한, 코팅의 마모율 및 마모폭도 비슷한 경향을 보인 것으로 보아, CrN/CrZrSiN 중간층을 합성한 CrAlN 코팅의 내마모성이 상대적으로 우수한 것으로 판단된다. 코팅의 밀착력의 경우도 마찰계수와 비슷한 경향을 보였다. 이것은 중간층의 H/E ratio가 코팅의 내마모성에 미치는 영향에 의한 결과로 사료된다. H/E ratio는 파단시의 최대 탄성 변형율로써, 모재/중간층/코팅의 H/E ratio 구배에 따라 코팅 내의 응력의 완화 정도가 변하게 된다. WC 모재 (H/E=0.040)와 CrAlN 코팅(H/E=0.089) 사이에서 CrN, CrZrSiN 중간층의 H/E ratio는 각각 0.076, 0.083으로 모재/중간층/코팅의 H/E ratio 구배가 점차 증가함을 확인 할 수 있었고, 일정 응력이 지속적으로 가해지면서 진행되는 마모시험중에 CrN과 CrZrSiN 중간층이 WC와 CrAlN 코팅 사이에서 코팅 내부의 응력구배를 완화시키는 역할을 함으로써 CrAlN 코팅의 내마모성이 향상된 것으로 판단된다. 모든 코팅을 열처리 후 경도 분석 결과, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅은 $1,000^{\circ}C$까지 약 28GPa의 높은 경도를 유지한 것으로 확인 되었고, 이는 CrZrSiN 중간층 내에 존재하는 SiNx 비정질상의 우수한 내산화성에 의한 결과로 판단된다.

• Korean journal of applied entomology
• /
• v.54 no.3
• /
• pp.191-197
• /
• 2015

Fruit drop due to Eurytoma maslovskii infestations of Japanese apricot (Prunus mume) is a serious economic issue in most parts of Jeonnam Province, with the exception of the coastal areas such as Wando, Shinan, Yeosu, and Muan. The average incidence of fruit drop was 67% in 2013 and 33.3% in 2014. E. maslovskii larvae overwinter inside the pits of Japanese apricots. Larval survival rates decrease to less than 30% after a rainy summer season. The eggs are long oval of 0.68 mm, 0.29 mm and ivory white. Mature larva is of 6.56 mm, 3.18 mm. Free pupa are black, adult females and males of 6.97 mm, 4.90 mm lengths, respectively, while the ovipositor is 0.64 mm in length. Adult emergence occurs from early April to early May, when Japanese apricot fruits are from 4 mm to 17 mm in diameter. Adults persist for 13.5 d after emergence, and the sex ratio of females to males was found th be 45.9:54.1. Although up to four eggs may be oviposited per fruit, only one larva will ultimately survive, ans the larvae are cannibalistic. The period during which E. maslovskii is able to oviposit on Japanese apricots only lasts from mid- to late April (fruit diameter: 12~16 mm). When the diameter of the fruit is >16 mm, the pit of the Japanese apricot hardens and larvae have difficultly penetrating the stone. Therefore, the most effective method of controlling this pest is to spray orchards with a control agent 2~3 times, at 5 d intervals, beginning in mid- April.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.38-45
• /
• 2015

BACKGROUND: For commercial production of greenhouse crops under shorter day length condition, supplementary radiation has been usually achieved by the artificial light source with higher electric consumption such as high-pressure sodium, metal halide, or incandescent lamps. Light-Emitting Diodes (LEDs) with several characteristics, however, have been considered as a novel light source for plant production. Effects of supplementary lighting provided by the artificial light sources on growth of Kale seedlings during shorter day length were discussed in this experiment. METHODS AND RESULTS: Kale seedlings were grown under greenhouse under the three wave lamps (3 W), sodium lamps (Na), and red LEDs (peak at 630 nm) during six months, and leaf growth was observed at intervals of about 30 days after light exposure for 6 hours per day at sunrise and sunset. Photosynthetic photon flux (PPF) of supplementary red LEDs on the plant canopy was maintained at 0.1 (RL), 0.6 (RM), and $1.2(RH){\mu}mol/m^2/s$ PPF. PPF in 3 W and Na treatments was measured at $12{\mu}mol/m^2/s$. Natural light (NL) was considered as a control. Leaf fresh weight of the seedlings was more than 100% increased under the 3 W, Na and RH treatment compared to natural light considering as a conventional condition. Sugar synthesis in Kale leaves was significantly promoted by the RM or RH treatment. Leaf yield per $3.3m^2$ exposed by red LEDs of $1.2{\mu}mol/m^2/s$ PPF was 9% and 16% greater than in 3W or Na with a higher PPF, respectively. CONCLUSION: Growth of the leafy Kale seedlings were significantly affected by the supplementary radiation provided by three wave lamp, sodium lamp, and red LEDs with different light intensities during the shorter day length under greenhouse conditions. From this study, it was suggested that the leaf growth and secondary metabolism of Kale seedlings can be controlled by supplementary radiation using red LEDs of $1.2{\mu}mol/m^2/s$ PPF as well as three wave or sodium lamps in the experiment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.394-402
• /
• 2021

The entry of an aging society and the extension of human life expectancy, the increasing interest in women's social advancement and men's appearance, and the natural interest in K-culture through media media, while receiving worldwide attention, Focus on K-Bueaty. Recently, looking at the occupation of the medical tourism field, in the case of aesthetic medicine tourism such as molding and dermatology, it has gained popularity not only in Asia such as China and Japan, but also in North America and Europe. The first external confirmation of human aging is the wrinkles on the skin of the face. Clean, wrinkle-free, elastic and healthy skin is a desire of most people. Skin condition and condition such as focused ultrasonic stimulation (HIFU: High Intensity Focused Utrasound) and low frequency, high frequency (RF: Radio Frequency), galvanic therapy using microcurrent, cryotherapy using rapid cooling, etc. Depending on the method of management, the effect of the treatment differs depending on the output and the stimulation site, etc., even in the treatment of medical equipment and beauty equipment using the same mechanism. In this research, in order to develop invasive high-frequency dermatological devices using a large number of beauty medical devices and microneedles of beauty devices, the international standards IEC 60601-2 (standards for individual medical devices) and MFDS (Ministry of) We designed and developed a high-frequency output device in compliance with the high-frequency stimulation standard announced in the Food and Drug Safety (Ministry of Food and Drug Safety). The circuit design consists of an amplifier (AMP: Amplifier) using Class-A Topology and a power supply device using Half-Bridge Topology. As a result of measuring the developed high-frequency output device, an average efficiency of 63.86% was obtained, and the maximum output was measured at 116.7W and 50.67dBm.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.298-317
• /
• 2019

The physical characteristics of the Ulleung Warm Eddy (UWE) and its relationship with the East Korea Warm Current (EKWC) were analyzed using the CMEMS (Copernicus Marine Environment Monitoring Service) satellite altimetry data and the CTD data of the National Institute of Fisheries Science (NIFS) near the Ulleung Basin from 1993 to 2017. The distribution of the UWEs coupled with EKWC accounts for 81% of the total number of the UWEs. Only 7% of the total eddies are completely separated from the EKWC. The UWE has the characteristics of high temperature and high salinity water inside of it when it is formed from the EKWC. However, when the UWE is wintering, its internal structure changes greatly. In the winter, surface homogeneous layer of $10^{\circ}C$ and 34.2 psu inside of the UWE is produced by vertical convection from sea-surface cooling, and deepened to a maximum depth of approximately 250 m in early spring. In summer, the UWE changes into a structure with a stratified structure in the upper layer within a depth of 100 m and a homogeneous layer made in winter in the lower layer. 62 UWEs were produced for 25 years from 1993 to 2017. on average, 2.5 UWEs were formed annually, and the average life span was 259 days (approximately 8.6 months). The average size of the UWEs is 98 km in the east-west direction and 109 km in the north-south direction. The average size of UWE using satellite altimetric data is estimated to be 1~25 km smaller than that using water temperature cross-sectional data.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.388-395
• /
• 2020

Exotic species have been imported for economic purposes, but more recently, an increasing number of animals are imported as pets. With the increasing popularity of two species of turtles, Mauremys sinensis and Pseudemys concinna, the number of pet turtle owners has gradually increased since 2014. The number of turtles increased by 180 in 2017 and 281 in 2019. However, these turtle species have been abandoned to nature, owing to their long lifespans and the changes in conditions of pet owners. The two turtle species have been designated as invasive alien species (AIS) in Korea considering their ecological risks, and the Biological Diversity Act prohibits their release. The owners of Mauremys sinensis and Pseudemys concinna are required to submit the "Application for Approval of Breeding and Grace for AIS" document. In this study, the breeding conditions for the two turtle species were investigated by analyzing the information in the submitted applications for six months (e.g., the suitability of breeding facilities, number of turtles, breeding period, type of pet adoption, and local district of pet owner). A total of 614 cases were analyzed. Because only 58% of breeders provided suitable breeding conditions, breeding information and responsible pet ownership training should be offered to prevent abandonment in natural ecosystems. In addition, continuous monitoring is necessary to prepare for potential problems caused by the lack of information in many applications and the one-off licensing policy.

• Korean Journal of Environment and Ecology
• /
• v.36 no.2
• /
• pp.177-201
• /
• 2022

Following the adoption of the global plant conservation strategies at the Conference of the Parties for Biodiversity Conservation, diligent actions to achieve each targets are actively carried out. In particular, the need for ecological conservation research to achieve targets 2 and 7 of GSPC-2020 has increased. The priority taxa to accomplish the objectives of GSPC-2020 are rare and endemic plants. In particular, endemic plants with limited distribution in specific regions are evaluated to face a high risk of extinction. To address the necessity to preserve endemic plants, we investigated the distribution of Prunus choreiana H. T. Im, a Korean endemic plant. After that, we examined the vegetational environment of the habitat of P. choreiana and evaluated its population structure. The productivity of its fruits and the effects of pollinators on fruit production were evaluated as well. The fruiting ratio was calculated based on the number of flowers produced. Lastly, we observed the annual growth characteristics of P. choreiana. The habitats of P. choreiana did not show a specific type of vegetation. All of them were located in a limestone area of Gangwon-do in the central Korean Peninsula and occupied a site where the coverage of the tree layer and the sub-tree layer was not high or did not exist. The population structure of P. choreiana contained a high proportion of mature plants capable of producing fruits and a low proportion of seedlings and Juvenile plants. We found that the production of fruits required pollinators and was affected by the performance of each plant. Although P. choreiana produces many flowers, only a maximum of 20% and only 2-6% on average bear fruits. These flowering characteristics may be due to pollinators' low abundance and activity during the flowering season (between mid-March and early April), suggesting that many flowers are needed to attract more pollinators. We rarely observed the re-establishment of seedlings in the population of P. choreiana. Despite that, we predict the population to persist owing to its long lifespan and periodic production of numerous fruits. However, if the tree layer and sub-tree layer in competing status with P. choreiana increase their crown density, they are expected to inhibit the growth of P. choreiana and affect the risk of its extinction. Therefore, the current changes in the vegetational environment of the habitats are expected to decrease the number and extent of P. choreiana in the long term. The results of this study may serve as primary and important data necessary for the achievement of GSPC-2020 objectives.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.1-16
• /
• 2023

As population ageing and shrinking accompanied by dramatically expanded individual life expectancy and declining fertility rate is a global phenomenon, ageing becomes its broader perspective of ageing well embedded into sustained health and well-being, and also the fourth industrial revolution speeds up a more robust and inclusive view of smart ageing. While the latest paradigm of SA has gained considerable attention in the midst of sharply surging demand for health and social services and rapidly declining labor force, the definition has been widely and constantly discussed. This research is to constitute a conceptual framework of smart ageing (SA) from systematic literature review and the use of a series of secondary data and Geographical Information Systems(GIS), and to explore its components. The findings indicate that SA is considered to be an innovative approach to ensuring quality of life and protecting dignity, and identifies its constituents. Indeed, the construct of SA elaborates the multidimensional nature of independent living, encompassing three spheres - Aging in Place (AP), Well Aging (WA), and Active Ageing (AA). AP aims at maintaining independence and autonomy, entails safety, comfort, familiarity and emotional attachment, and it values social supports and services. WA assures physical, psycho-social and economic domains of well-being, and it concerns subjective happiness. AA focuses on both social engagement and economic participation. Moreover, the three constructs of SA are underpinned by specific elements (right to housing, income adequacy, health security, social care, and civic engagement) which are interrelated and interconnected.