• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.668-670
• /
• 1998

테크놀로지 매핑의 효율성은 매핑된 회로의 지연시간과 회로의 면적에 의해서 평가되어진다. 특히 순차회로에서는 레지스터 사이의 조합회로의 최대지연시간에 의해서 전체회로의 지연시간이 결정된다. 본 논문에서는 순차회로에 대한, 건설적인(Constructive) 단계와 반복적인(Iterative) 단계의 리타이밍 기술과 퍼지 논리에 의해 향상된 FPGA 매핑 알고리즘을 소개한다. 주어진 초기회로는 건설적인 방법에 의하여 FPGA회로로 초기매핑되어진후 반복적인 리타이밍에 의하여 매핑회로의 효율을 높이게된다. 초기회로에 주어진 여러 가지 기준들은 결정 함수(Decision Making)에 대한 퍼지 이론 법칙의 계층적인 구조에 의해 연결되어져 있다. 제안된 매퍼는 MCNC 밴치마커의 실험을 통해 지연시각과 면적에서 기존 매핑시스템의 성능을 능가함을 보여준다.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.107-114
• /
• 2002

The cadastral surveying is essential for the effective management of a country, the D/B building of NGIS. Many of GPS applications require a positioning accuracy of several centimeters for rover in real-times. But, to achieve higher positioning accuracies in real-time, the double differencing technique should be implemented using carrier phase data. Corrected observations at the reference station can be transmitted and used to form double difference observations at the rover using a data link. In this study, the area accuracy of cadastral survey using the RTK GPS will be assessed, and will produce area of parcel of land. As the result of comparison among area by TS, planer surveying and RTK GPS. parcels-register for site is analyzed by this data. The results show that mean error of area calculated min. $2.42m^{2}{\sim}\;max.\;13.69m^{2}$ and RMSE calculated min. $0.00329\;{\sim}\;max.\;0.01846$.

• Korean Journal of Environment and Ecology
• /
• v.26 no.2
• /
• pp.247-256
• /
• 2012

We evaluated the landscape ecological value of selected minefields and wetland patches as a habitat of the forest bird community. The avian fauna of three minefields of 8.5ha, 17.4ha, and 40.6ha were evaluated by comparing that of three control sites of mountain area. Average number of forest bird species, number of individuals, species diversity index, species richness, and species evenness were analyzed according to the size of patch and environmental characteristics such as the presence of wetland and connectivity. Community similarity was evaluated between test and control plots. Avian fauna can be summarized as follows. First, 63 species were recorded, and the sum of maximum counts was 828 individuals. Species diversity index was 3.8, and the species richness was 9.2. Species evenness was 93.3. Second, small, isolated forest patch had a low average number of species and individuals as expected. But, small forest patches with streams had higher bird density than patches without water surface. Third, forest patches with marsh wetland were evaluated as lower habitat quality than forest patches with stream wetland in terms of the number of bird species per unit area, number of individuals per unit area, species diversity index, species richness index, and species evenness. Finally, Community similarity of the small forest patches with streams was similar with large connected forest. As a result, lowland forest patch was shown the good quality for the forest bird community in spite of small extents, and community structure was similar with mountain forest bird community. Thus, riparian forest restoration could improve the biodiversity of the forest bird community.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2457-2464
• /
• 2011

In this paper, a vibration energy harvesting circuit using a piezoelectric device is designed. MPPT(Maximum Power Point Tracking) control function is implemented using the electric power-voltage characteristic of a piezoelectric device to deliver the maximum power to load. The designed MPPT control circuit traces the maximum power point by periodically sampling the open circuit voltage of a full-wave rectifier circuit connected to the piezoelectric device output and delivers the maximum available power to load. The proposed vibration energy harvesting circuit is designed with $0.18{\mu}m$ CMOS process. Simulation results show that the maximum power efficiency of the designed circuit is 91%, and the chip area except pads is $700{\mu}m{\times}730{\mu}m$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1183-1189
• /
• 2015

This study focuses on the design of the tapered joints of a wind power turbine. The main variables of the tapered joint are the transmitted torque, shaft diameter, contact area of the tapered ring, and tightening torque of the bolts, which applies a compressive pressure from the hub to the shaft. The stress distribution of the taper fit was calculated under axisymmetric plane strain conditions because of the small taper angle. The axial displacement of the clamp can be calculated from the radial elastic deformation and the taper angle. The stress field of each ring is obtained from the cylinder stress equation. To verify the accuracy of the calculation, finite element (FE) analysis was performed, and the results of the calculation and FE analysis were compared. The hoop stress of the tapered surface showed a discrepancy of approximately 10, but the trends of the stress distributions of each component and the relative movement obtained by FE analysis were in good agreement with the analytical calculation results.

• Electronics and Telecommunications Trends
• /
• v.31 no.5
• /
• pp.59-69
• /
• 2016

4G 대비 50배 이상의 최대 전송률, 1Gbps 이상의 사용자 체감 전송율, $10TB/s/km^2$의 단위 면적당 트래픽 용량, 1ms 이내의 전송 지연, $10^7/km^2$ 고연결 밀도 등의 핵심 성능 지표를 목표로 5G 기술 연구개발이 진행되고 있다. 5G 성능 지표의 달성을 위해 스펙트럼 효율을 증가시키는 무선 전송 기술, 유연성 있는 스펙트럼 사용 기술, 초고주파 대역 활용 전송 기술, 밀집 소형셀 기술 등의 신기술이 무선 액세스망에 적용되고 있으나, 백홀, 미드홀 그리고 프론트홀 등의 전달망 구간에도 높은 데이터 전송률과 매우 낮은 지연 시간을 제공할 새로운 해결책이 요구된다. 본고에서는 다양한 링크 전송 기술과 SDN/NFV를 수용하면서 패킷 스위칭 통합 망을 향해 연구되고 있는 5G 전달망 기술동향을 기술한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.52-57
• /
• 2009

This paper presents a low-noise low-dropout linear regulator that is suitable for on-chip integration with RF transceiver ICs. In the bandgap reference, a stacked diode structure is adopted for saving silicon area as well as maintaining low output noise characteristic. Theoretical analysis for supporting the approach is also described. The linear regulator is fabricated in $0.18{\mu}m$ CMOS process. It operates with an input voltage range of 2.2 V - 5 V and provide the output voltage of 1.8 V and the output current up to 90 mA. The measured line and load regulation is 0.04%/V and 0.46%, respectively. The output noise voltage is measured to be 479 nV/$^\surd{Hz}$ and 186 nV/$^\surd{Hz}$ from 100 Hz and 1 kHz offset, respectively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.4
• /
• pp.231-239
• /
• 2007

This paper presents the trade-off relationship between area and performance in the hardware design space exploration for the Korean national standard 128-bit block cipher algorithm SEED. In this paper, we compare the following four hardware design types of SEED algorithm : (1) Design 1 that is 16 round fully pipelining approach, (2) Design 2 that is a one round looping approach, (3) Design 3 that is a G function sharing and looping approach, and (4) Design 4 that is one round with internal 3 stage pipelining approach. The Design 1, Design 2, and Design 3 are the existing design approaches while the Design 4 is the newly proposed design in this paper. Our new design employs the pipeline between three G-functions and adders consisting of a F function, which results in the less area requirement than Design 2 and achieves the higher performance than Design 2 and Design 3 due to pipelining and module sharing techniques. We design and implement all the comparing four approaches with real hardware targeting FPGA for the purpose of exact performance and area analysis. The experimental results show that Design 4 has the highest performance except Design 1 which pursues very aggressive parallelism at the expanse of area. Our proposed design (Design 4) shows the best throughput/area ratio among all the alternatives by 2.8 times. Therefore, our new design for SEED is the most efficient design comparing with the existing designs.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.211-225
• /
• 2013

To run an optimal operation of Integrated energy supply facilities, we need to analyze heat consumption patterns of District heating users and derive optimum and maximum load ratio of heat production facilities unit. This study selects three District heat production facilities. It also classifies District heating users into residential apartment buildings and eight non-residential buildings and analyzes heat consumption results for an year. Finally it carries out the analysis of how the ratio change of each type affects maximum load ratio, facility utilization ratio, heat supply range. According to this study, three different District heat facilities of residential apartment building show similar daily and annual heat consumption patterns. Annual average load ratio, maximum load ratio and annual heat demand increase as outdoor temperatures decrease. Non-residential buildings in urban District focused on apartment buildings display similar by the daily and annual heat consumption patterns. Yet their daily and annual maximum load ratio differ according to outdoor temperature, District, building types and their composition ratio. In the case of urban District focused on apartment buildings reach optimum and maximum load ratio when apartment buildings reaches 60-70% of the total. At that point heat supply range becomes maximized and the most economic efficiency is obtained.