• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.584-591
• /
• 2010

In this paper, we propose an adaptive Relay Station (RS) coverage extension scheme for the Mobile Multi-hop Relay (MMR) systems. The MMR system with a non-transparent mode RS can be used to extend BS coverage using the remaining capacity of the Base Station(BS). Thus, the call blocking may occur in RSs when calls arrive very often in Multi-hop Relay Base Station (MR-BS). In the proposed scheme, RSs can be connected to the neighbor MMR system as the 2ndtier RSs if the neighbor MMR system services low traffic load when calls are frequently arrived in MR-BS or RSs. By doing so, the MMR system can accept a new call without call blocking. Through numerical results, we demonstrate that the proposed scheme outperforms the conventional MMR system in terms of the throughput and call blocking probability of MMR systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.987-995
• /
• 1999

The handoff is a distinctive characteristic of the mobile networks. In the CDMA systems, if base stations support multiple Frequency Assignment (FA), they provide both soft handoff and hard handoff. Under the CDMA environments, the soft handoff guarantees the favorable service quality and the continuity of call connection without interruption, and increases the service capacity of the base stations. This paper proposes call connection control schemes with handoff queue for supporting efficient handoff processing. The proposed schemes are divided into two categories: single handoff queue scheme and multiple handoff queue scheme. We analyze the performance of the proposed call connection control schemes using numerical analysis. From the analysis results, we can say that it is more desirable to avoid hard handoff as long as handoff queues are used. When a single handoff queue used, adaptive scheme that properly mixes avoidable and avoidable hard handoff method under the given traffic condition is more desirable. In case that multiple handoff queues are used, the suitable trade-off needs to be developed between handoff blocking probability and hard handoff probability to guarantee a given blocking probability threshold.

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.354-372
• /
• 2016

This study identified factors affecting the crash severity at freeway work zones. A nice feature of this study was to take into account the characteristics of work zone traffic management in analyzing traffic safety concerns. In addition to crash records, vehicle detection systems (VDS) data and work zone historical data were used for establishing a dataset to be used for statistical analyses based on an ordered probit model. A total of six safety improvement strategies for freeway work zones, including traffic merging method, guidance information provision, speed management, warning information systems, traffic safety facility, and monitoring of effectiveness for countermeasures, were also proposed.

• Journal of Korea Multimedia Society
• /
• v.7 no.5
• /
• pp.737-743
• /
• 2004

In this paper, we propose the call control scheme that can improve the capacity of the wireless system for the non-uniform traffic load distribution and the multiple types of services in multiple cells CDMA system. The number of mobile stations that can be served simultaneously in a base station is limited by the amount of total interference received in CDMA system. Further, the average number of mobile stations in each cell may not be uniformly distributed. Considering this factors, the call admission control scheme using the effective bandwidth concept is adapted in this paper. Thus, the bandwidth for a new call can be varied dynamically for reducing the blocking rate of new calls and the dropping rate of handoff calls. The suggested call control scheme is experimented through a simulation by dynamically assigning the bandwidth to new and handoff calls. The simulation results show that the proposed call control scheme can accommodate more mobile stations than the other methods in multiple cells environment.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.601-609
• /
• 2023

In this paper, we propose an artificial intelligence-based high-speed fault diagnosis method using an FPGA in the event of a ground fault in a DC system. When applying artificial intelligence algorithms to fault diagnosis, a substantial amount of computation and real-time data processing are required. By employing an FPGA with AI-based high-speed fault diagnosis, the DC breaker can operate more rapidly, thereby reducing the breaking capacity of the DC breaker. therefore, in this paper, an intelligent high-speed diagnosis algorithm was implemented by collecting fault data through fault simulation of a DC system using Matlab/Simulink. Subsequently, the proposed intelligent high-speed fault diagnosis algorithm was applied to the FPGA, and performance verification was conducted.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.513-521
• /
• 2018

Purpose: The purpose of this study was to assess the effectiveness and complications of an ultrasound-guided axillary brachial plexus block performed by orthopedic surgeons. Materials and Methods: From March to May 2017, an ultrasound-guided axillary brachial plexus block was performed on a total of 103 cases of surgery. A VF13-5 transducer from Siemens Acuson X300 was used. The surgical site was included in the range of the anatomic sensory distribution of the blocked nerve, except for the case where an operation time of more than 2 hours was expected due to multiple injuries and the operation of the upper arm. The procedure was performed by 2 orthopedic surgeons in the same method using 50 ml of solution (20 ml of lidocaine HCl in 2%, 20 ml of ropivacaine in 0.75%, 10 ml of normal saline in 0.9%). The success rate of anesthesia induction during surgery, anesthetic induction time, anatomical range of operation, duration of postoperative analgesia and complications were investigated. Results: The results from the 2 practices were similar. The anesthesia was successful in 100 out of 103 patients (97.1%). In these patients, the average needling time was 5.5 minutes (2.5-13.2 minutes), the average induction time to complete anesthesia was 18.4 minutes (5-40 minutes), and the average duration of postoperative analgesia was 402.8 minutes (141-540 minutes). The post-anesthesia immediate complications were dizziness in 1 case, nausea and vomiting in 4 cases, and peri-oral numbness in 2 cases, but surgery was performed without problems. All these 7 cases with complications recovered on the same day. A total of 3 cases failed with anesthesia, and they were treated by an injection with local anesthesia in the operation room in 2 cases and switched to general anesthesia in 1 case. Conclusion: An ultrasound-guided axillary brachial plexus block, which was performed by orthopedic surgeons allows anesthesia in a brief period and the high success rates of anesthesia for certain surgeries of the elbow and surgeries on forearm, wrist and hand. Therefore, it can reduce the waiting time to the operating room. This technique is a relatively safe procedure and dose selective anesthesia is possible.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.486-493
• /
• 2010

This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1115-1123
• /
• 2000

Most of the existing web caches are used in huge organizations. But many internet users belong to small organizations such as a venture company or a PC room. Users are in general in multiple window environments, and use several programs concurrently with rapid preference change within a relatively short period of time. We develop a network-path based algorithm. It organizes a cache according to the network paths of the requested URLs and builds a network cache farm where caches are logically connected with each other and each cache has its own preference over certain network paths. The algorithm has been implemented and tested in a real site. The performance results show that the new algorithm outperforms the existing algorithms in the hit ratio and response time dramatically with low cost.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.929-934
• /
• 2006

In the paper, we suggest a simpler synthesis technique for capacitively-coupled match circuit(CCMC) which have a function of DC block and impedance matching simultaneously, and introduce a stability margin analysis technique for designing microwave amplifier under conditionally stable state. Stability margin analysis is used to determine optimum match point that ensure maximum gain under the given stability margin. It can reduce time consuming work for selecting match points in the conditionally stable state. Also, suggested miniaturization scheme of matching network is distinguished from previous work with respect to reducing deterministic parameters for CCMC synthesis. To verify utility of suggested method, 24 GHz gain block is fabricated under conditionally stable state using an internal thin-film fabrication process, Measured results show a stable gain of 10 dB and flatness of 1 dB, which is well coincident with simulated one.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1387-1394
• /
• 2005

In this paper, we propose and the call admission control mechanism that can improve the capacity of the wireless system for the non-uniform traffic load distribution based intelligent information in multiple cellular CDMA environment. The number of mobile stations that can be served simultaneously in a base station is limited by the amount of total interference received in CDMA system. Further, the average number of mobile stations in each cell may not be uniformly distributed. In this paper, considering this factors, the call admission control mechanism using the effective bandwidth concept is adapted to improve the system capacity of non-uniform traffic load distribution based intelligent information. Thus, the bandwidth for a new call can be varied dynamically for reducing the blocking rate of new calls and the dropping rate of handoff calls. The suggested call admission control mechanism is experimented through simulation by dynamically assigning the bandwidth to new and handoff calls. The simulation results show that the proposed call admission control mechanism can accommodate more mobile stations than the other methods in multiple cellular CDMA environment.