• NEWSLETTER 전기공업
• /
• no.95-18 s.139
• /
• pp.27-47
• /
• 1995

• 전기산업
• /
• v.13 no.11
• /
• pp.9-14
• /
• 2002

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.838_839
• /
• 2009

차단기는 전력계통에서 고장이 발생한 경우, 고장전류가 퍼져나가는 것을 방지하고 고장전류에 의해 계통에 연결된 다른 기기들이 손상을 입는 것을 방지하는 전력기기이다. 그 중 진공 차단기는 친환경성과 우수한 절연특성으로 배전급 중.저압용 차단기로 널리 사용되고 있다. 차단기는 크게 조작부와 차단부로 구분되는데 진공 차단기의 조작부 메커니즘은 스프링 구동방식과 영구자석형 마그네틱 액츄에이터(PMA)를 사용하여 구동하는 방식으로 나뉜다. 본 논문에서는 진공차단기의 조작부인 영구자석형 마그네틱 액츄에이터(PMA)의 개방.투입 유지력과 동작특성을 유한요소법을 이용하여 해석하였다. 정밀한 해석을 위해 물질의 비선형성을 고려하였으며, 외부회로와 결합한 전자계 해석을 하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.911-912
• /
• 2007

영구자석형 조작기(PMA)의 단점을 보완한 고전압 차단기용 전자석 조작기인 EMFA는 긴 스트로크를 가지는 차단기에도 사용이 가능하며, 특히 진공 차단기(VCB)용 조작기를 비롯하여, 가스 차단기(GCB)에 적용한 모델도 이미 개발되었다. 다양한 모델에 대한 설계 및 연구가 추가적으로 진행되고 있으나, 아직 설계 방법이 정형화되어 있지 않아 모델에 따라 그 형상이 달라지는 경우가 많다. 이러한 점을 개선하기 위해, 본 논문에서 EMFA의 설계 변수를 변화시켜 가며 나타나는 특성을 홀딩력과 자속밀도를 통해 분석하였다. 나아가 이를 바탕으로 설계 방법의 정형화에 대한 실마리를 제공하고자 한다. 해석에는 2차원 유한요소법을 이용하였고, 설계 변수는 조작기의 초기상태를 기준으로 설정하였다.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.895-900
• /
• 2001

It is very important for impact analysis to reflect the dynamic characteristics of materials as well as the static characteristics. As the dynamic behavior of a material is different from the static(or quasi-static) one due to the inertia effect and the stress wave propagation, an adequate experimental technique has to be developed to obtain the dynamic responses for the corresponding level of the strain rate. To determine the dynamic characteristics of materials, the Hopkinson bar (compression type) experiment is carried out. For using dynamic material properties, Johnson-Cook model is applied in impact analysis with explicit finite element method

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1651-1653
• /
• 1996

As electrode materials like as Cu-Pb, Cu-Bi, WC-Ag, W-Ag for vacuum circuit breaker have high chopping current or bad insulation-recovery characteristics, it can affect induction machinery like as transformer and motor. To produce low surge electrode material, it have been suggested Co-Ag-Se electrode which were infiltrated with Ag-Se intermetallic compound into sintered Co matrix. In this study, we would like to represent that production method and microstructure of Co-Ag-Se electrode material. The microstructure and characteristics of Ag-Se intermetallic compound and Co-(Ag-Se) electrode were investigated by using SEM, XRD, EPMA.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.123-128
• /
• 1996

As electrode materials like as Cu-Pb, Cu-Bi, WC-Ag, W-Ag for vacuum circuit breaker have high chopping current or bad insulation-recovery characteristics, it can affect induction machinery like as transformer and motor. To produce low surge electrode material, it have been suggested Co-Ag-Te electrode which were infiltrated with Ag-Te intermetallic compound into sintered Co matrix in vacuum. In this paper, we would like to represent that production method and microstructure of Co-Ag-Te electrode material in each condition. The microstructure and characteristics of Ag-Te intermetallic compound and Co-(Ag-Te) electrode were investigated by using optical microscope, SEM, XRD, EPMA.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.61-63
• /
• 2005

In this paper, a new type of permanent magnetic actuator (PMA) with multi-stage coils is proposed. Although the conventional type of PMA has many advantages, it cannot be applied in the high voltage circuit breakers due to its short stoke length. The new type of PMA has long stroke length by using multi-stage coils, so it can be applied as an actuator for the high voltage circuit breakers. Dynamic characteristics are calculated by the finite element method (FEM), equation of electric circuit and dynamic equation. The position of plunger and the current of coils in case of the actuator applied in 38kV, 40kA vacuum circuit breaker are presented.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.130-137
• /
• 2015

This study is about the controller development of the Electric Operating Cell(EOC) which will replace the Mechanical Operated Cell(MOC) of the vacuum circuit breaker which has been used in the power plant and the performance test for the developed controller. The controller developed through this study was manufactured considering the harsh installation environment and electrical condition of the power plant, and the controller performance certification test for confirming the product reliability was taken to know whether or not to withstand fully in various electrical and mechanical problems. Items for performance certification test were AC power frequency voltage withstand test, combined surge immunity test, 1 [MHz] oscillatory SWC test, fast transient SWC test, radiated electromagnetic interference test, vibration test. As a result, all tests has passed an examination without malfunction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2503-2508
• /
• 2014

This study is about the selection and noise test of electronic sensor which is preceded by electric Operating Cell(EOC) development using electronic sensor technology to solve the structural weakness of Mechanism Operated Cell(MOC) in VCB, and has a final target in product development minimizing contact malfunction of the chattering or rebounce states caused by existing MOC. In this test results, when opening and closing VCB, rising velocity of surge voltage in opening time was measured 4.2 times faster than closing time and noise decibel value was measured respectively 120dB and 110dB. When supplying 60kV power frequency overvoltage, we found that sensor output graph in VCB opening and closing times operated stably without distortion. When supplying 150kV $1.2{\times}50{\mu}s$ impulse frequency voltage, we found that voltage graph of output contact in sensor opening and closing sides maintained a normal condition without distortion, and when supplying 2500A current, we found that tested result of electric field noise operated stably without distortion.