The Transactions of the Korean Institute of Electrical Engineers P (전기학회논문지P)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Development of Controller which is used Electric Operating Cell(EOC) for Vacuum Circuit Breaker and the Controller Performance Certification Test

진공차단기용 전자식 보조접점 컨트롤러 개발 및 성능인증시험에 관한 연구

  • Received : 2015.07.24
  • Accepted : 2015.08.27
  • Published : 2015.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study is about the controller development of the Electric Operating Cell(EOC) which will replace the Mechanical Operated Cell(MOC) of the vacuum circuit breaker which has been used in the power plant and the performance test for the developed controller. The controller developed through this study was manufactured considering the harsh installation environment and electrical condition of the power plant, and the controller performance certification test for confirming the product reliability was taken to know whether or not to withstand fully in various electrical and mechanical problems. Items for performance certification test were AC power frequency voltage withstand test, combined surge immunity test, 1 [MHz] oscillatory SWC test, fast transient SWC test, radiated electromagnetic interference test, vibration test. As a result, all tests has passed an examination without malfunction.

Keywords

References

  1. J.H.Hwang, J.C.Lee, Y.J.Kim,"Effects of Electrode Configurations on the Characteristics of Axial magnetic Fields in Vacuum Interrupter", Trans. KSME p.7-p.8, 2008
  2. J.G. Kim et al,"A Study on the Reduction Method and the Anaylsis of VCM Switching Surge for High Voltage Induction Motor", Trans. KIEE, Vol.43,No.5, pp.761-769, May, 1994
  3. Flurscheim, Charles. H, Power circuit breaker theory and design, IEE Power Engineering Series1, Chapter8, pp.356-P389
  4. D.C. Bacvaro et al., "Risk of winding Insulation Breakdown in Large AC Motors Caused by Steep Switching Surge; Part1, Computed Switching Surges", IEEE Trans. EC, Vol. 1, No. 1, pp. 130-137, March 1986
  5. K.S.Lee, J.C.Park, S.N.Chu,"A Study on the selection and noise test of electronic sensor for Vacuum Circuit Breaker",JKIICE,Vol.18.No.10, pp. 2503-2508, 2014
  6. "Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating Current Rotating Electric Machines", IEEE Standard 522-1992
  7. J.G.Kim,"Surge Characteristics Analysis and Reduction Method of Vacuum Circuit Breaker", Trans, KIEE pp.190-191, 2013
  8. Liu, Yigang Xue, Chang Liu, Gang , "Analysis for AC Voltage Withstand Test of HV XLPE Power Cable", Solid Dielectrics, ICSD '07. IEEE International Conference, vol. 2007 no. 7, pp.666-668, July. 2007.
  9. Zhai Xiaoshe, geng Yingsan, Wang Jianhua, Zhang Guogang, Wang Yan, "Modeling of the Combination Wave Generator and Simulation of the Surge Immunity Test" Institute of Electronics, Information and Communication Engineers, technical report. EMD 110(270), pp. 147-150, Nov. 2011.
  10. Vlah, Z.J, Ontario Hydro Research Division, Harvey, S.M "Multi-Frequency Surge Withstand Capability Tests for Protective Relays" Power Apparatus and Systems, IEEE Transactions on. vol. PAS-100, Issue 3, pp. 1065-1071, Feb. 2007
  11. Tengdin, J.T, OPUS Consulting Group, San Clemente, CA, USA "History - events leading to the development of IEEE Std1613TM-2003 and its predecessor standards (IEEE Std C37.90, IEEE Std C37.90.1, IEEE Std C37.90.2, and IEEE Std C37.90.3)" Transmission and Distribution Conference and Exposition, 2010 IEEE PES, pp. 1-7, April. 2010
  12. Burgett, R.R, AC Spark Plug Division, General Motors Corporation, Flint, Mich. 48556, Massoll, R.E, Van Uum, D.R "Electromagnetic interference (EMI) reduction from printed circuit boards (PCB) using electromagnetic bandgap structures" Electromagnetic Compatibility, IEEE Transactions on, vol. EMC-16, Issue 3, pp. 160-172, Feb. 2007