• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.10-13
• /
• 2012

본 논문은 가상 직물 착용을 위한 직조 패턴 제거 필터의 성능 분석에 관한 것이다. 명도 차분 맵을 이용한 가상 직물 착용 시스템은 의류 형상 영역의 명도 차분 맵을 이용하여 조명과 음영 특성을 추출할 시, 의류 형상 영역의 색상에는 무관하지만 의류 모델의 직조 패턴에는 영향을 받는다. 본 논문에서는 바이래터럴 필터(bilateral filter)와 측지 형태학 필터(geodesic morphological filter)에 기반하여 모델 의류 영역의 직조 패턴을 제거하는 방법을 소개하고 그 성능을 분석함에 목적이 있다. 가상 직물 착용 시스템에 직조 패턴 제거 필터를 채택할 경우, 최대한 모델 영상의 직조 패턴에 무관하게 직물 원단의 디자인이 의복의 외관에 미치는 영향을 시뮬레이션할 수 있음에 따라 직물 디자이너의 창작활동을 도와줄 수 있다. 또한 온라인상에서 직물 원단이나 의류를 거래할 시에 구매자로 하여금 모델 영상의 직조패턴에 종속되지 않은 상태에서 의사결정을 할 수 있도록 지원해 B2B 또는 B2C 전자상거래 행위를 촉진할 수 있다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.2
• /
• pp.84-93
• /
• 2008

Modeling and rendering of cloth texture have been regarded as one of the most important factors to enhance reality of the contents in the digital contents industry. So far, however, two major approaches to realistically describe the cloth texture were developed: building analytical reflectance model for target cloth and sometimes thread itself and obtaining overall reflectance model using optical equipments. However, yielding a plausible analytic reflection model satisfying many subtle characteristics of a cloth is not an easy task; moreover, fine-detailed modeling of the cloth pattern across the target clothes should also be accompanied by huge amount of computation. The method to obtain overall reflectance model needs expensive measurement equipments and data size becomes huge. Since it applies in the end the reflectance model obtained at one point of a cloth to across whole the visible area of the target clothes, it cannot properly reproduce the pattern of the clothes nor the texture. To address the aforementioned problems, this paper proposes a simple low cost camera rig and a novel method for realistic modeling and rendering of the cloth texture by analyzing photos taken by the proposed camera rig, which can reproduce even the texture pattern applied to the whole clothes, overcoming the one-point reflectance model.

• Composites Research
• /
• v.32 no.1
• /
• pp.65-70
• /
• 2019

The aircraft composites wing parts are usually integrated with adhesive or fastener. These laminated composites have weak interlaminar strength, which can lead to delamination. In order to compensate the disadvantages of laminated composites, it is possible to improve the strength, durability, shock and fatigue resistance by reinforcing the fiber in the thickness direction. In addition, using a single structure near-net-shape saves the manufacturing time and the number of fasteners, thus can reduce the overall cost of the composite parts. In this study, compression test, tensile test and open-hole tensile test are carried out for three structural architecture of 3D (three-dimensional) textile preforms: orthogonal(ORT), layer-to-layer(LTL) and through-the-thickness(TTT) patterns. Among these, the orthogonal textile composite shows the highest Young's modulus and strength in tensile and compression. The notch sensitivity of the orthogonal textile composite was the smallest as compared with UD (unidirectional) and 2D (two-dimensional) fabric laminates.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.8-17
• /
• 2022

This paper presents a novel geometric modeling technique to predict the mechanical properties of an aircraft wing's skin-stringer integrated panel. Due to mechanical and adhesive fastening, this panel is vulnerable to stress concentration and debonding, so we designed it to integrate the skin and stringer using three-dimensional woven composites. Geometric modeling was conducted by measuring the geometric parameters of the specimen and defining the pattern of the yarns as functions. We used a weighted average model with iso-strain and iso-stress assumptions to predict the mechanical properties of the panel parts. We then compared the results of a finite element analysis with a compression test to verify the accuracy of our model. Our proposed technique proved to be more efficient than the traditional experimental method for predicting the mechanical properties of skin-stringer integrated panels.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.225-236
• /
• 1996

Computer simulation methods for three area of textile design, wearing, and design were developed by using CAD system, and its results were applied to pattern design simulation. Textile design created by using the CAD system was applied to T-shirt schematization. Created wearing, printing, and knitting design respectively were applied to women clothing, children's wear, and men sweater. In this rearch, several equipped since various color working, materials, pattern development and swift intention decision of goods direction are possible on the moniter. Third, many goods order are rushed within short time because spot direction are possible on the moniter. Third, many goods order are rushed within short time because intention decision of buyer could be induced and embodied design almost reflection the buyer's will on the spot before production of goods and samples. Forth, time and expense were saved to get the information in terms of design information systematically and could be managed annually. Fifth, creative design development can be not only availed but saved the service expense of outside orders and the traffic expense.

• Composites Research
• /
• v.33 no.1
• /
• pp.13-18
• /
• 2020

Recently, the fire rescue truck in problem proceed research it for the fast works action and for pass the small road. So we were research for weight reduction. In this study, the (NO. 5) fifth boom of the fire rescue truck have 288 mm(W) × 299 mm(D) × 3,691 mm(L) with a maximum load of 876 kg and the thickness of 3 mm of the Steel Boom. This changing of Steel (STRENX960) to CFRP was weave Carbon Fiber NCF (±45°, 2axis) and then it make the NCF Prepreg. This process was designed based on structural analysis, the effects of NCF Prepreg (±45°) on torsion were identified, and the optimal design was made with Stacking Pattern (b). Stack patterns were optimized for levels equal or higher than existing Steel Boom and CFRP Boom stacked in the UD direction, and finally, the lightening effect on weight of approximately 49.6% of the steel was identified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.15-18
• /
• 2004

피뢰기에 뇌 또는 이상전압과 같은 정격이상의 고장전류가 유입되어 발생하게 되는 순간적인 열 충격과 내부압력 상승은 폭탄이 내부에서 터지는 것과 같은 엄청난 양의 충격에너지이다. 본 연구에 있어서 폴리머 피뢰기의 제조에 사용된 모듈용 브레이드 복합재료는 압력해소 및 폭발 비산하지 않도록 하는 기능을 수행하도록 설계되어있다. 기존의 폴리머 피뢰기에 적용된 복합재료보다 충격에너지를 흡수하는 구조물에 유리한 브레이드 복합재료를 피뢰기 모듈의 제조에 도입한 것은 매우 의미 있는 일이라 판단된다. 따라서 본 연구에서는 열경화성 브레이드 복합재료를 제조하기 위하여 프리폼을 먼저 제작한 다음 금형에 삽입한 후 진공상태에서 수지를 주입하여 경화시키는 RTM공법을 이용하였다. 본 연구의 목적은 브레이드 패턴 및 방압개소 설계 등의 기초적인 자료조사 및 실험을 통하여 폴리머 피뢰기의 폭발 비산을 방지할 수 있는 압력해소 성능을 위한 기초 자료를 확보하고자 하는 것이다. 브레이드 복합재료의 기본적인 경화거동을 등온 및 동적 DSC를 이용하여 고찰하였고, 기본적인 전기적 특성을 평가하였으며, 방압개소를 가진 폴리머 피뢰기 모듈의 고장전류시험시 예상되는 열 충격에 대한 성능을 검증하기 위하여 열팽창계수를 측정하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.920-928
• /
• 2006

Fiber-reinforced composites transmitting microwaves of certain frequencies or bands were proposed. These frequency selective fabric composites(FSFCs) are fabricated by weaving carbon fibers and dielectric fibers that build periodic patterns. Design parameters affecting the electromagnetic characteristics of FSFCs were widely discussed, Then the electromagnetic characteristics of a fabricated plain-weave FSEC were investigated with regard to the electrical conductivities of carbon roving, the fiber undulation, and the aperture-to-cell ratio, for the electrical conductivities, its dependence on frequency as well as on the fiber volume fraction of carbon roving was taken into account. Constituent material properties and the fiber undulation had little effect on the EM properties of the fabricated FSFC, while the aperture-to-cell ratio made a profound effect on them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3815-3826
• /
• 2011

TThis study was undertaken to make trial costumes of ball jointed dolls for promoting the beauty of Korean cultural product with historical research of upper class ladie's costume from late Goryeo to early Joseon, the very unknown period in the Korean costume history. The ladies' costume from late Goryeo to early Joseon are characterized by their full silhouette, fusion with clothings of Yuan and Ming, revival of early Goryeo styles, well-developed weaving skill of ramie, a showy costume from Buddhist civilization. After investigation of researcher with literature, painting, and relics in 13-14C, 8 clothing items were outsourced totally. Items were formed as a set concept, but consumer can choose each costume as an single item and can make varied mix also. Dart, small ties, and thick fabrics were used in doll costumes partly because ball jointed doll's body has different characteristics from that of human beings. Developing research of manufacturing company's system for ready-made product remains to be considered in the future.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.133-150
• /
• 2022

Calling the 21th century the age of 'cultural competition' is not an overstatement. In an era of globalization, we try to find the 'identity of our country' in our culture. 'Culture' is the unique ethnicity of the people of each country that reflects the traces of their lives. As the world is transforming into a multi-dimensional place, traditional patterns in reference to cultural uniqueness and original formativeness are the brands that represent the people. France's luxury brand, GOYARD's Y-shaped pattern naturally made during the persistent traditional handmade process is still France's representative corporate brand and is considered prestigious even after 150 years have passed. On the other hand, in low-income countries, patterns created in the natural process of weaving fabrics are succeeded as a unique cultural aesthetic and are loved by people all over the world. Like this, people living in the global multi-dimensional world look to attain the framework 'One Planet Perspective' which is to succeed their own native culture and preserve the unique culture of others. For example, in the process of international relief organizations delivering relief supplies to Columbia's "Wayu tribe" due to the water shortage in 2013, a handmade product, "Mochila Bag" was discovered. Triggered by this incident, Europe and Korea decide to import it to support the livelihood of the "Wayu tribe." Also, the aesthetic and cultural values of the traditional culture in minority tribes that have evolved through thousands of years have been listed on UNESCO and preserved worldwide. Likewise, culture doesn't suddenly appear overnight, but rather the brand representing the company is the pattern used in the trend of the era kept for over 100 years. Moreover, patterns that reflect the country's identity are inherited as the unique aesthetic of the culture. Our country does inherit the unique aesthetic of our culture, but doesn't have a 'strong image' that displays the practical value reinterpreted creatively and aesthetically to fit the modern trend. Traditional patterns are important in perspective of study and theoretical research, but the brand's image using those patterns is a new medium from the past existence continuing to the current tradition. Furthermore, this study suggests that the image of a company that uses traditional patterns will have high economical potential as a national brand.