• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.321-327
• /
• 2006

In this paper, when a H-polarized plane wave is incident on the grating consisting of uniform resistive strips, electromagnetic scattering is analyzed using the moment of methods (MoM). The current density of each resistive strip on a grounded dielectric plane is fixed by zero at both edges. To satisfy the condition at both ends of each resistive strip, the induced surface current density is expanded in a series of cosine and sine functions. The scattered electromagnetic fields are expanded in a series of floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for zero and several resistivities are obtained.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.2
• /
• pp.189-196
• /
• 2009

This paper presents the subparametric finite element model formulated by partial-linear layerwise theory for the analysis of laminate composites. The proposed model is based on refined approximations of two dimensional plane for orthotropic thick laminate plate as well as thin case. Three dimensional problem can be reduced to two dimensional case by assuming piecewise linear variation of in-plane displacement and a constant value of out-of-plane displacement across the thickness. The integrals of Legendre polynomials are chosen to define displacement fields and Gauss-Lobatto numerical integration is implemented in order to directly obtain maximum values occurred at the nodal points of each layer without other extrapolation techniques. The validity and characteristics of the proposed model have been tested by using orthotropic multilayered plate problem as compared to the values available in the published references. In this study, the convergence test has been carried out to determine the optimal layer model in terms of central deflection and stresses. Also, the distribution of displacements and stresses across the thickness has been investigated as the number of layer is increased.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.187-196
• /
• 2021

The paper deals with comparative study for characteristics of approximation of design space according to various approximate models and sensitivity analysis using orthogonal array experiments in structure design of active type DSF which was developed for float-over installation of offshore plant. This study aims to propose the orthogonal array experiments based design methodology which is able to efficiently explore an optimum design case and to generate the accurate approximate model. Thickness sizes of main structure member were applied to the design factors, and output responses were considered structure weight and strength performances. Quantitative effects on the output responses for each design factor were evaluated using the orthogonal array experiment. Best design case was also identified to improve the structure design with weight minimization. From the orthogonal array experiment results, various approximate models such as response surface model, Kriging model, Chebyshev orthogonal polynomial model, and radial basis function based neural network model were generated. The experiment results from orthogonal array method were validated by the approximate modeling results. It was found that the radial basis function based neural network model among the approximate models was able to approximate the design space of the active type DSF with the highest accuracy.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.163-168
• /
• 2011

In this paper, we proposed non-linear gamma curve algorithm for gamma correction. The previous non-linear gamma curve algorithm is generated by the least square polynomial using the Gauss-Jordan inverse matrix. However, the previous algorithm has some weak points. When calculating coefficients using inverse matrix of higher degree, occurred truncation errors. Also, only if input sample points are existed regular interval on 10-bit scale, the least square polynomial is accurately works. To compensate weak-points, we calculated accurate coefficients of polynomial using eigenvalue and orthogonal value of mat11x from singular value decomposition (SVD) and QR decomposition of vandemond matrix. Also, we used input data part segmentation, then we performed polynomial curve fitting and merged curve fitting results. When compared the previous method and proposed method using the mean square error (MSE) and the standard deviation (STD), the proposed segmented polynomial curve fitting is highly accuracy that MSE under the least significant bit (LSB) error range is approximately $10^{-9}$ and STD is about $10^{-5}$.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.15-21
• /
• 2008

The high peak to average power ratio (PAPR) of OFDM (Orthogonal Frequency Division Multiplexing) system introduces inevitable non-linear distortion in the transmission due to the amplifier non-linear property. This causes both in-band distortion and out of band spectrum re-growth. In this paper we tried to compensate the problem by using polynomial based pre-distortion. Estimation of both the non-linear and inverse non-linear polynomial is achieved using the Least Square Error (LSE) method. Using these parameters closed form pre-distorter can be easily created. We also used the 'partial peak cancellation and clipping' method to remove the high peak present in the non constant amplitude of the OFDM signal responsible to drive the amplifier in near saturation region for better performance of the system

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.56-61
• /
• 1995

많은 공학자들은 기계 재료의 종류 및 형태에 따른 정적, 동적 특성 연구를 수행해 왔다. 특히 산업적으로 그 활용도가 높은 평판 재료에 대한 진동 특성 연구는 많이 이루어졌다. 최근에는 진동 특성을 해석하는 방법도 부분구조합성법, 감도해석법 등의 방법으로 연구가 활발히 이루어지고 있다. 한편 평판의 진동이 공기와 같은 매질로 상호 작용을 하며, 막힘이 없는 공간으로 음향을 방사하는 현상에 대한 연구도 이루어지고 있다. 그러나 평판 재료를 사용하여 기계 구조물을 제작하는 경우 많은 경우에 구조물간 결합에 의해 폐공간이 형성되고 이러한 폐공간에 의해 평판의 진동이 구조-음향 연성 현상이 발생되고, 이에 따라 평판의 진동 특성도 달라지게 된다. 이러한 구조-음향 연성에 대한 연구는 1978년 Wayne B.McDonald와 C.Kearney Barton, 1979년 R.Vaicatis에 의해 폐공간 내로의 음향 전달 현상을 연구하며 이루어졌다. 최근에 연구 동향은 이장명의 FEM과 BEM을 이용한 폐공간 내로의 음향 전달 현상을 연구하였고, V.B.Bokil에 의해 구조-음향 연성된 평판의 모드 해석 방법이 연구되었다. 한편 V.Martin에 의해 능동 소음 제어의 모델링을 좀더 정확히 하기 위해 구조 연성계를 고려한 연구도 수행되었다. 연구 결과 구조-음향 연성에 의한 평판의 고유진동수 변화를 구하였고 이 때에 경계조건을 만족하는 직교다항식을 이용한 Rayleigh-Ritz 방법을 이용하였다. 또한 이러한 해석은 실험과도 매우 잘 일치함을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2150-2158
• /
• 2002

A recent research and development has the requirement for the optimization to shorten design time of modified or new product model and to obtain more precise engineering solution. General optimization problem must consider many conflicted objective functions simultaneously. Multi-objective optimization treats the multiple objective functions and constraints with design change. But, real engineering problem doesn't describe accurate constraint and objective function owing to the limit of representation. Therefore this study applies variance analysis on the basis of structure analysis and DOE to the vertical roller mill fur portland cement and proposed statistical design model to evaluate the effect of structural modification with design change by performing practical multi-objective optimization considering mass, stress and deflection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.83-93
• /
• 2017

In everyday life, the ratio of credit card aspect ratio is 1: 1.56, and A4 printer paper is 1: 1.414, which is relatively balanced golden ratio. In this paper, we show the Fibonacci Golden ratio as a polynomial based on the golden ratio, which is the most balanced and ideal visible ratio, and show that the application of Euler and symmetric jacket polynomial is related to BPSK and QPSK constellation. As a proof method, we have derived Fibonacci Golden and Galois field element polynomials. Then mathematically, We have newly derived a golden jacket code that can be used to generate an appropriate code with orthogonal properties and can simply be used for inverse calculation. We also obtained a channel capacity according to the channel correlation change using a block jacket matrix in a MIMO mobile communication.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.849-863
• /
• 1992

A very simple and computationally efficient numerical method is developed for the free vibration of isotropic and orthotropic composite triangular plates. A set of two-dimensional simple series functions is used as an admissible displacement functions in the Rayleigh-Ritz method to obtain the natural frequencies, nodal patterns and mode shapes for the plates. From the prescribed starting function satisfying only the geometric boundary conditions, the higher terms in the series functions are constructed with adding order of polynominal. Natural frequencies, nodal patterns and mode shapes are obtained for right triangular plates with three different support conditions. The obtained numerical results are presented, and the isotropic and some orthotropic cases are verified with other numerical methods in the liternature.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.12
• /
• pp.1141-1150
• /
• 2012

This paper describes the shape optimization of impeller blades for an anti-heeling bidirectional axial flow pump used in ships. In general, a bidirectional axial pump has efficiency much lower than that of a classical unidirectional pump because of the symmetry of the blade type. In this study, by focusing on a pump impeller, the shape of the blades is redesigned to develop a bidirectional axial pump with higher efficiency. The commercial code employed in this simulation is CFX v.13. The CFD result of the pump torque, head, and hydraulic efficiency was compared. The orthogonal array (OA) and analysis of variance (ANOVA) techniques and surrogate-model-based optimization using orthogonal polynomials are employed to determine the main effects and their optimal design variables. According to the optimal design, we confirm an effective design variable for impeller blades and explain the optimal solution as well as the usefulness of satisfying the constraints of the pump torque and head.