• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.138-146
• /
• 2007

This paper describes 2.5D induced polarization (IP) modeling and inversion algorithms using complex resistivity. The complex resistivity method has merits for acquiring more valuable information about hydraulic parameters and pore fluid than the conventional IP methods. The IP modeling and inversion algorithms are developed by allowing complex arithmetic in existing DC modeling and inversion algorithms. The IP modeling and inversion algorithms use a 2.5D DC finite-element algorithm and a damped least-squares method with smoothness constraints, respectively. The accuracy of the IP modeling algorithm is verified by comparing its responses of two synthetic models with two different approaches: linear filtering for a three-layer model and an integral equation method for a 3D model. Results from these methods are well matched to each other. The inversion algorithm is validated by a synthetic example which has two anomalous bodies, one is more conductive but non-polarizable than the background, and the other is polarizable but has the same resistivity as the background. From the inverted section, we can cleary identify each anomalous body with different locations. Furthermore, in order to verify its efficiency to the real filed example, we apply the inversion algorithm to another three-layer model which includes phase anomaly in the second layer.

• KSCI Review
• /
• v.1 no.2
• /
• pp.47-72
• /
• 1995

지금까지 나타난 많은 리더십 이론이 주로 기독교 문화권인 서구에서 연구된 것을 문화권이 다른 우리나라에 적용하고자 하는 것이 기존의 연구 경향이었다. 오랫동안 전통이 되어 온 우리 특유의 조직 문화 중에서 특히 관료적이고 권위주의적인 조직 문화에 새로운 변화가 일어나고 있는 과도기적인 현시점에서 최근에 나타난 리더십 이론인 B.M.Bass의 변형적 리더십 이론을 모델로 하여 우리 기업에 적절한 리더십 유형을 찾는 것이 일차적 목적이며 여기서 찾아낸 리더십 유형 별로 조직원의 상사 만족도에 미치는 영향을 알아보는 것이 이 연구의 목적이었다. 따라서 이 논문에서 제시한 리더십 유형을 보면 변혁적 리더십 유형에 속하는 것으로 지원적 배려, 카리스마, 과업 동기 자극으로 3분류하였으며 거래적 리더십 유형에 속하는 것으로 상황적 보상, 예외 관리, 소극적 관리로 3분류하여 모두 6유형을제시하고 신뢰성과 타당성을 확인하였다. 실증 연구 결과를 보면 우리나라는 거래적 리더십유형인 상황적보상, 예외 관리, 소극적 관리가 모두 조직원의 상사 만족도에 영향을 미치는것으로 나타나 Bass의 주장과는 다소 상이하다. 그러나 변혁적 리더십 유형인 카리스마, 지원적 배려, 과업 동기 자극에서는 카리스마만이 조직원의 상사 만족도에 영향을 미치고 지원적 배려는 영향력의 정도가 미약하며 과업 동기 자극은 거의 영향을 미치지 못하는 것으로 나타났다. 따라서 리더의 부하 통솔 및 지도 방향에서 아직도 우리나라에서는 거래적 요소가 짙다는 것을 알 수 있었다. 비록 당분간은 리더가 거래적 리더십을 많이 사용하겠지만 기업의 역사가 길어지고 종업원의 교육 훈련의 기회가 많아지면 변혁적 리더십으로 전환되리라 생각된다.가 단층원주상피세포와 단층입방상피가 부위에 따라 다르게 분포하고 있으며, 상피세포 및 결합조직에는 두터운 근육층이 있어 음경의강한 운동성이 감지 되었다. 제주도 내의 서귀포 부근에서는 현재 천연기념물로 지정되어 있는 서귀포층내에서 많은 화석들이 산출되고 있다. 이 시대는 빙하기와 간빙기가 교호하던 시대로서, 분석 결과에 의하면 서귀포층이 쌓일 당시에 우리 나라는 빙하기의 영향을 받았던 것으로 생각된다.is)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.

• International Commerce and Information Review
• /
• v.15 no.1
• /
• pp.161-183
• /
• 2013

The essential purpose of this study is to exemplify empirically some relations of between Korea image attributes and Korea image making in Uzbekistan. This study is for providing basically empirical analysis for intensifying Korea's economic capacity based on Korean image in Uzbekistan and for offering any kinds of implications for the entry and management activities of Korean enterprises in world-wide business. This study is organized in two stages. First, the study model is designed by reappraising relevant theories, previous studies and the current investment qualifications concerning the country image attributes and image making. Second, the survey of Uzbekistan people who are living in South Korea is accomplished by collecting questionnaires. SPSS 15.0 for windows is being activated for correlation, reliability, validity and finally the statistical method of structural equation modeling is utilized to testing the hypothesis by AMOS 7.0 for windows. In conclusion partially, Korea image attributes: economic capability, popular culture, national traits and enterprise competence are proved to influence positively to Korea image making: recognition, attractiveness and confidence which is considered generally by Uzbekistan people.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.75-88
• /
• 1999

A recent major subject of geophysical exploration is research into 3-D subsurface imaging with a composite information from the various geophysical data. In an attempt to interpret Schlumberger sounding data for the study area in 2-D and 3-D view, resistivity imaging was firstly performed and then pseudo-3-D resistivity volume was reconstructed by interpolating several 1-D resistivity plots. Electrical resistivity discontinuities such as fracture zone were successfully clarified in pseudo-3-D resistivity volume. The low resistivity zone mainly associated with fracture zone appears to develop down to granitic basement in the central part of the study area. Seismic velocity near the lineament is estimated to be approximately as small as 3,000 m/s, and weathering-layer for the southeastern part is interpreted to be deeper than for the northwestern part. Geophysical attributes such as electrical resistivity, seismic velocity, radioactivity for the Chojeong Area were analysed by utilizing a GIS software Arc/Info. The major fault boundaries and fracture zones were resolved through image enhancement of composite section (electrical resistivity and seismic refraction data) and were interpreted to develop in the southeastern part of the area, as characterized by low electrical resistivity and low seismic velocity. However, radioactivity attribute was found to be less sensitive to geological discontinuities, compared to resistivity and seismic velocity attributes.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.139-151
• /
• 2007

Stereophotogrammetry is a method to extract information of an interested area by constructing a stereo-image from two or more photos. In this study, the stereophotogrammetry was adopted to obtain the joint orientation and trace length from a sampling window and its measurements were compared with the result by a clinocompass and measuring tape to evaluate the applicability of the stereophotogrammetry to rock joint survey. A commercial stereophotogrammetry program, ShapeMetriX 3D, was used for this purpose. Firstly, the accuracy of the measuring method using ShpaeMetrix 3D was evaluated by a model test. Secondly, joint orientations on a rock slope and tunnel were obtained by using ShapeMetriX 3D and compared with the measurement by a clinocompass. Finally. the effect of base-depth ratio in photographing was evaluated by comparing images with various base-depth ratios, and the usefulness of closed-up photographing on a rock exposure to increase the measurement accuracy was tested. The dip and dip direction of each model plane obtained by ShapeMetriX 3D showed an error ranged between $-5^{\circ}\;and\; 5^{\circ}$ on the basis of the results by the measuring tape. Base-depth ratio proved not to influence the analysis result by ShapeMetriX 3D if all the images were taken without any hidden area. The close-up photographing turned out useful to obtain the detailed images and therefore precise result when ShapeMetriX 3D was adopted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1899-1909
• /
• 2007

A cross-coupled charge pump with internal pumping capacitor, witch is advantages from a point of minimizing TFT-LCD driver IC module, is newly proposed in this paper. By using a NMOS and a PMOS diode connected to boosting node from VIN node, the pumping node is precharged to the same value each pumping node at start pumping operation. Since the lust-stage charge pump is designed differently from the other stage pumps, a back current of pumped charge from charge pumping node to input stage is prevented. As a pumping clock driver is located the font side of pumping capacitor, the driving capacity is improved by reducing a voltage drop of the pumping clock line from parasitic resistor. Finally, a layout area is decreased more compared with conventional cross-coupled charge pump by using a stack-MIM capacitors. A proposed charge pump for TFT-LCD driver IC is designed with $0.13{\mu}m$ triple-well DDI process, fabricated, and tested.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.49-56
• /
• 1998

Seismic tomography has been widely used as high resolution subsurface imaging techniques in engineering applications. Although most of the techniques have been using travel time inversion, waveform method is being driven forward owing to the progress of computational environments. Although full-waveform inversion method has been known as the best method in terms of model resolving power without high-frequency restriction and weak scattering approximation, it has practical disadvantage that it is apt to get stuck in local minimum if the initial guess is far from the actual model and it consumes so much time to calculate. In this study, 2-D full-waveform inversion algorithm in acoustic medium is developed, which uses result of traveltime tomography as initial model. From the application on synthetic data, it is proved that this approach can efficiently reduce the problem of conventional approaches: our algorithm shows much faster convergence rate and improvement of model resolution. Result of application on physical modeling data also shows much improvement. It is expected that this algorithm can be applicable to real data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.653-659
• /
• 2018

The accurate prediction of construction cost is a key factor in a project's success. However, it is hard to predict the construction costs in the planning stages rapidly and precisely when drawings, specifications, construction cost calculation statements are incomplete, among other factors. Accurate construction-cost prediction in the planning stage of a project is also important for project feasibility studies and successful completion. Therefore, various techniques have been applied to accurately predict construction costs at an early stage when project information is limited. There are many factors that affect the construction cost prediction. This paper presents a construction-cost prediction method as multiple regression model with seven construction factors as independent variables. The method was used to predict the construction cost of a local housing union project, and the error rate was 4.87%. It is not possible to compare the cost of the project at the planning stage of the local housing union project, but it has high prediction accuracy compared to the unit price of an existing unit area. It is likely to be applied in construction-cost calculation work and to contribute to the establishment of the budget for the local housing union project.

• Tunnel and Underground Space
• /
• v.30 no.6
• /
• pp.509-518
• /
• 2020

This study constructed a new simulation platform, including mesh generation process, numerical simulation, and post-processing for results analysis based on exploration data to perform real-scale numerical analysis considering the actual geological structure efficiently. To build the simulation platform, we applied for open-source programs. The source code is open to be available for code modification according to the researcher's needs and compatibility with various numerical simulation programs. First, a three-dimensional model(3D) is acquired based on the exploration data obtained using a drone. Then, the domain's mesh density was adjusted to an interpretable level using Blender, the free and open-source 3D creation suite. The next step is to create a 3D numerical model by creating a tetrahedral volume mesh inside the domain using Gmsh, a finite element mesh generation program. To use the mesh information obtained through Gmsh in a numerical simulation program, a converting process to conform to the program's mesh creation protocol is required. We applied a Python code for the procedure. After we completed the stability analysis, we have created various visualization of the study using ParaView, another open-source visualization and data analysis program. We successfully performed a preliminary stability analysis on the full-scale Dokdo model based on drone-acquired data to confirm the usefulness of the proposed platform. The proposed simulation platform in this study can be of various analysis processes in future research.

• Tunnel and Underground Space
• /
• v.32 no.2
• /
• pp.131-143
• /
• 2022

The lunar exploration autonomous vehicle operates based on the lunar topography information obtained from real-time image characterization. For highly accurate topography characterization, a large number of training images with various background conditions are required. Since the real lunar topography images are difficult to obtain, it should be helpful to be able to generate mimic lunar image data artificially on the basis of the planetary analogs site images and real lunar images available. In this study, we aim to artificially create lunar topography images by using the location information-based style transfer algorithm known as Wavelet Correct Transform (WCT2). We conducted comparative experiments using lunar analog site images and real lunar topography images taken during China's and America's lunar-exploring projects (i.e., Chang'e and Apollo) to assess the efficacy of our suggested approach. The results show that the proposed techniques can create realistic images, which preserve the topography information of the analog site image while still showing the same condition as an image taken on lunar surface. The proposed algorithm also outperforms a conventional algorithm, Deep Photo Style Transfer (DPST) in terms of temporal and visual aspects. For future work, we intend to use the generated styled image data in combination with real image data for training lunar topography objects to be applied for topographic detection and segmentation. It is expected that this approach can significantly improve the performance of detection and segmentation models on real lunar topography images.