• Tunnel and Underground Space
• /
• v.26 no.6
• /
• pp.508-515
• /
• 2016

In this study, we compared the stability of the pillars by using room and pillar mining method with the four models with different stiffness and pillar overlap ratio. The experimental models consist of two plaster models (overlap ratio 0%, 100%) and two cement models(overlap ratio 0%, 100%). The soft and hard rocks are modeled by plaster and cement models respectively. In these experiments, the model materials with strength values reflecting the calculated scaled factors not been used, so it is not a true scaled model test that reproduces in situ state in the laboratory. Experimental results show that the different overlap ratio pillars are one of the factors that can affect the stability of the mine.

• Journal of Korea Multimedia Society
• /
• v.10 no.2
• /
• pp.226-235
• /
• 2007

Recently, the lETF NEMO working group on network mobility is standardizing a basic support for moving networks. We need a handover scheme for achieving the performance of transparency during the movement of mobile routers in nested mobile networks. But existing handover schemes for a mobile host are not suitable for network mobility because the packet transmission delay and traffic increase during mobile router's handover in nested mobile networks. Therefore, we propose a new seamless handover scheme using the bi-casting based on Mobile IPv6 for nested mobile networks in this paper. Compared with the handover schemes using bi-directional edge tunneling for host mobility support on simulation. And, the results show that the proposed handover scheme reduces the packet delay during a mobile router changes the point of attachment in nested mobile networks.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.1
• /
• pp.33-38
• /
• 2006

Purpose: This study seeks to address the results of percutaneous lateral release and medial reefing for patients with recurrent patellar dislocation. Materials and Methods: This paper focuses on 27 cases from 25 patients who had a surgical operation at our hospital in a span of eight years and six months from the time of December 1996 to May 2005. The subjects consist of 11 males and 14 females, and their average age was 22.2 years old. All the patients had their trauma history, and the average frequency of dislocation before surgery was 11.5 times. Results: The congruence angle before operation was 23.3 degree on the average, while the lateral patellofemoral angle was -5.7 degree on average. However, the congruence angle after surgery came to -2.4 degree, while the lateral patellofemoral angle recovered to the normal range of within 11.5 degrees. Four cases showed the recurrent dislocation, and two out of those four cases had -35, -12 degrees of their lateral patellofemoral angle respectively and 59, 14 degrees of their congruence angle respectively. Conclusion: Using percutaneous lateral release with medial reefing can be considered as an effective treatment for recurrent patellar dislocation

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2B
• /
• pp.82-89
• /
• 2008

Mobile IP is the basic solution to provide host mobility, whereas network mobility refers to the concept of collective mobility of a set of nodes. In a network mobility scenario, mobile networks can be nested in a hierarchical form. That situation is referred to a nested mobile network Nested mobile networks exhibit the pinball routing problem, which becomes worse in proportion to the number of nested levels in the hierarchy. In this paper, we propose a routing optimization scheme having backward compatibility to the basic network mobility protocol and concerning heterogeneity of nested mobile network, also we perform comparison and analysis of proposed schemes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.43-50
• /
• 2016

NAND flash based storage devices adopts multi-channel and multi-way architecture to improve performance using parallel operation of multiple NAND devices. However, multiple NAND devices consume higher current and peak power overlap problem influences on the system stability and data reliability. In this paper, current waveform is measured for erase, program and read operations, peak current and model is defined by profiling method, and estimated probability of peak current overlap among NAND devices. Also, system level TLM simulator is developed to analyze peak overlap phenomenon depending on various simulation scenario. In order to remove peak overlapping, token-ring based simple power management method is applied in the simulation experiments. The optimal peak overlap ratio is proposed to minimize performance degradation based on relationship between peak current overlapping and system performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2843-2852
• /
• 2013

In the nested mobile network environment, the mobile node selects one of multiple mobile routers. The MR(Mobile Router) by existing top-down or bottom-up methods may not be the optimal MR if the numbers of mobile nodes and routers are substantially increased, and the scale of the network is increased drastically. Since an inappropriate MR decision causes handover or binding renewal to mobile nodes, determining of the optimal MR is important for efficiency. In this paper, we propose an algorithm that decides on the optimal MR using MR QoS(Quality of Service) information, and we describe how to understand the various structured MLP(Multi-Layered Perceptron) based on the algorithm. In conclusion, we prove the ability of the suggested neural network for a nesting mobile network through the performance analysis of each learned MLP.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.2
• /
• pp.87-96
• /
• 1999

To analyze the dynamic behavior of structure, direct integration and mode superposition may be utilized in time domain analysis. As finite number of frequencies can give relatively exact solutions, mode superposition is preferable in analyzing structural behavior. In non-linear analysis, however, mode superposition is seldom used since time-varying element stiffness changes stiffness matrix, and the change of stiffness matrix leads to the change of essential constants - natural frequencies and mode shapes. In spite of these difficulties, there are some attempts to adopt mode superposition because of low cost compared to direct integration, but the result is not satisfactory. In this paper, a method using mode superposition in non-linear analysis is presented by separating local element stiffness from global stiffness matrix with the difference between linear and non-linear restoring forces to the external force vectors included. Moreover, the hysteresis model changing with the relative deformation in each floor makes it possible to analyze non-linear behavior of structure. The proposed algorithm is applied to shear beam model and the maximum displacement is compared with the result using direct integration method.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.50-53
• /
• 2017

Purpose The change in uniformity due to the decreasement in dose should be known. $^{57}Co$ sealed sources are easy to manage and use as QC sources replacing $^{99m}Tc$. Overlapping sealed sources are expected to show variations in dose due to attenuation between sealed sources. Materials and Methods A total of three experiments were conducted. The first experiment is to observe the change in the degree of senescence of the $^{57}Co$ sealed source. The second experiment is to compare the single source and overlaped source at similar doses. In the third experiment, the sources of different doses were compared on each other to determine the changes due to the attenuation between the overlapping sources. Results The results of the first experiment did not exceed the acceptable range. but each crew showed a difference. There was no statistically significant difference in the measurement of uniformity on second and third experiment Conclusion It is believed that a $^{57}Co$ sealed source can be used as a superimposed source. It is not only economical but also convenient to use. daily uniformity measurements will help reduce scan time and speed up the testing process.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.125-135
• /
• 1993

고밀도 폴리에틸렌(High density polyethlene, HDPE)내에 차단성 수지인 나일론 (Nylon)이 분산된 블렌드의 모폴로지와 유기 용제에 대한 차단성에 대해 연구하였다. 나일 론이 구형, 실린더 및 판상 구조 형태를 가지며 분산된 블렌드를 가공조건을 변화시켜 제조 하였다. 블렌드의 모폴로지가 유기 용제의 차단성에 끼치는 영향을 알아보기 위하여 투과시 험을 하였으며 수치 모사를 통하여 투과도를 이론적으로 예측해 보았다. 동일한 나일론양에 서 분산상인 나일론이 구형 또는 실린더 형태를 갖는 경우 투과액에 대해 낮은 차단성을 보 이는데 반하여 판상구조를 갖게되는 경우에는 차단성이 크게 상승함을 관찰할수 있었다. 이 는 판상구조형태를 취함으로써 블렌드내에서의 투과액의 투과경로가 길어졌기 때문이다. 나 일론 층의 여러기하학적인 형태변화에 대해 GRM관계식 및 이를 수정한 식을 이용하여 투 과도를 예측하여 보았다. 나일론층의 중첩도가 높다고 가정한 경우가 중첩도를 낮게 생각한 경우에 비해 높은 차단성을 보임을 수정된 GRM 관계식을 통하여 알 수 있었다. 또한 나일 론 층의 폭이 증가할수록 그리고 두께가 감소할수록 높은 차단효과를 보임을 예측 할 수 있 었다.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2017.10a
• /
• pp.16-18
• /
• 2017

컴퓨터 기술이 발전함에 따라 디지털 게임 속 가상경관은 보다 정교해지고 있으며, 설계 및 구현 과정에서 고려를 요구하는 요소들이 증가하고 있다. 하지만 여태 가상경관 설계를 위한 정형화된 설계 방법론도 전무한 관계로, 디자이너들은 비효율적인 설계 과정을 거치며 동시에 질적으로도 만족스럽지 못한 결과물을 구축하고 있다. Ian McHarg의 도면 중첩법은 레이어 단위로 설계 고려요소를 정리하여 설계를 진행하기에, 설계에 고려할 요소들을 체계적으로 종합하는 디자인의 진행이 가능하다. 이에 본 연구에서는 도면 중첩법을 활용한 가상경관 설계 방법론을 구축하였다. 이를 위해서 우선 가상경관의 공간적 특수성에 따라 분류를 진행하는 분류 방법론을 문헌 조사를 통해 파악하여, 이들을 각각의 레이어로 조직하였다. 그리고 설계 영역으로서의 가상경관과 실공간의 차이점을 파악하여 이들을 기반으로 한 가상경관 설계 방법론을 구축하였다. 마지막으로 프로토콜 분석방법론과 공간 구성요소의 비교분석을 통하여 본 연구에서 구축한 설계 방법론의 유효성을 검증하였다. 검증 결과, 본 설계 방법론은 디자이너들의 작업 시간을 22% 이상 줄일 수 있었으며, 동시에 작품의 질을 향상시킬 수 있었다. 향후 본 설계 방법론은 디지털 게임을 비롯한 가상경관 설계 및 구현의 영역에서 활발한 활용을 기대할 수 있을 수 있으며, 나아가 가상경관을 조경 설계의 한 영역으로써 확장이 가능할 것임을 시사한다.