• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.451-458
• /
• 2011

This study aims at identifying wall painting production technique of Songsanri No. 6 tomb based on optical examination and scientific analysis along with the investigation of written records of ancient wall paintings. The result displays that bricks with mortar were used for the construction of the wall, and masonry joint were made of lime, sand and gypsum. The surface of brick were plastered with black and thereafter with white lime. Finely sifted clay on the top of the white surface, were applied not with plasterer's trowel but with a brush for making ground surface. The clay are mineral particles smaller than $30{\mu}m$ of silt. The wall paintings of Sonsanri No. 6 is the only example of making ground layer with clay for painting of Sasindo (literally four heavenly animals painting) among remaining wall paintings of ancient tombs. The historical value of the painting should be attributed not only in terms that it displays a rare production techniques which were never discovered in any other paintings in Korea and Asia, but also it might had been uncompleted when the tomb were closed, even though it considers the fact that the wall painting were discovered in damaged condition in 1933.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.129-138
• /
• 2008

The finite element method(FEM) was one of tools used to solve problem of previous Concrete Pavement and was applied to Korea Pavement Research Program Study. This study used the ABAQUS and the fortran analysis program to calculate the critical stress on jointed concrete pavement and compared and analyzed the results by using neural networks and linear regression model. In that case, which are not enough analysises by using FEM programs though many input variables, when the results of FEM with NN and linear regression models are compared, there are some differences. The other cases, which are reduced input variables and a lot of analysises each of them, results of Neural Networks(NN) and linear regression models are simulated to them of FEM. But, the result of NN is more exact than them of linear regression at the (0,0), (1,1). On the results of this study, it is suggested that the calculation of stress using NN is more compatible to Korea Pavement Research Program Study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.113-121
• /
• 2015

Building using masonry accounts for most of the smaller houses in Korea but due to brittle behavior and low ductility the frequency of usage has decreased in recent years. Despite this, this form of building has been gaining attention overseas for its low cost in construction and environment-friendliness of the materials. As such, many studies are being conducted to resolve the disadvantages in structure. This study produced an specimen for masonry-filled wall and the intersection to confirm the difference in structural movement depends on the existence or lack of expansion joint and verified the reinforcement effect from inserting a connecting steel item (steel plate, stainless steel twist bar). The experiment results show that the specimen with a steel plate inserted saw an increase in durability and an improvement in the strength of the specimens, while the specimen that had stainless steel twists bar inserted saw an increase in ductility that did not cause brittle failure, indicating that the reinforcement effects of inserting a connecting steel item are effective.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.161-168
• /
• 2005

The influence of spandrel wall and fill above the extrados on the structural behavior and load capacity of stone masonry arch bridges has not been thoroughly studied yet. One can estimate the structural characteristics and behavior of stone masonry structures by measuring the dynamic characteristics. To investigate the influence of spandrel wall and fill on the dynamic characteristics of historic stone masonry arch bridges, on-site free vibration tests were performed for 5 stone bare arches with no spandrel wall and backfill. And the natural frequencies of those arches were compared with the natural frequencies of 18 stone arch bridges with spandrel walls. Experimental results show from the experiments show that the presence of spandrel wall and fill may increase the natural frequency of arch bridge because the stiffness increase exceeds the mass increase due to spandrel wall.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.197-204
• /
• 2005

Multipurpose Floor Level Joint(MFLJ) is a new construction technology system which was developed in domestic. By using this system, it is possible not only to absorb the deformation at expansion joint due to shrinkages of concrete but also to make ease the floor leveling during the concrete casting at floor. The system consists of two elements, supporting devices and rails. Their structural capacities were verified through several experimental programs, such as compressive strength test of support and bending test of rail. The purpose of this paper is to evaluate the deformation absorbing capacity of the floor level joint. An experimental work was carried out to simulate the deformation condition at the joint and the test result was analyzed and evaluated. In addition, FEM analysis for expansion joint of typical building was also performed to predict the real behavior of MFLJ. The test results showed that MFLJ has sufficient deformation capacity required to act as expansion joint.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.496-503
• /
• 2016

This paper studies the leakage situation of domestic residential building underground parking lots and main leakage areas. 18 complexes were studied and the results showed that 80% of buildings with exterior waterproofing had no leakage, but all buildings with interior waterproofing had leakage. According to a survey among professionals, water leakage problems are considered to be severe in underground parking lots and a preventative measure is required by the government. By comparing the survey and the actual situation at hand, the results showed that the lowest floor slab, wall construction joints, and floor expansion joints were the most prone to leakage. Based on the results, further study to develop a design manual for the appropriate prevention of leakage is deemed necessary.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.165-174
• /
• 2010

This study was conducted to evaluate the feasibility of expedite repairing of concrete pavements using precast concrete pavement method and to investigate the effectiveness of slab connection methods. In the demonstration construction, four slabs of jointed concrete pavements were replaced with the precast slabs. First, precast concrete slabs were designed and fabricated, then existing slabs were cut and removed, and finally precast slabs were installed. The slabs were leveled and pockets, holes, and space between the slab bottom and the underlying layer were grouted. From the demonstration construction, details about the design and construction of the precast pavements for repairing of pavements were evaluated. In addition, the slab connection methods such as pocket and hole connection methods were applied in the construction and the slab curling behaviors at the joints that include those connection methods were compared. The results showed that both slab connection methods were applicable, and the hole connection method was superior.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.47-55
• /
• 2013

PURPOSES : The purpose of this study is to investigate the optimal joint positions which can minimize distresses of concrete pavement containing box culvert with horizontally skewed angles. METHODS : The concrete pavement containing the box culvert with different skewed angles and soil cover depths was modeled by 3 dimensional finite element method. The contact boundary condition was used between concrete and soil structures in addition to the nonlinear material property of soil in the finite element model. A dynamic analysis was performed by applying the self weight of pavement, negative temperature gradient of slab, and moving vehicle load simultaneously. RESULTS : In case of zero skewed angle ($0^{\circ}$), the maximum tensile stress of slab was the lowest when the joint was positioned directly over side of box culvert. In case there was a skewed angle, the maximum tensile stress of slab was the lowest when the joint passed the intersection between side of the box culvert and longitudinal centerline of slab. The magnitude of the maximum tensile stress converged to a constant value regardless the joint position from 3m of soil cover depth at all of the horizontally skewed angles. CONCLUSIONS : More reasonable and accurate design of the concrete pavement containing the box culvert can be possible based on the research results.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.103-115
• /
• 2011

Concrete slab curls and warps due to the uneven distribution of temperature and moisture and as the result, internal stress develops within the slab. Therefore, environmental loads must be considered in addition to the traffic loads to predict the lifespan of the concrete pavement more accurately. The strength of the concrete slab is gradually decreases to a certain level at which fatigue cracking is generated by the repetitive traffic and environmental loadings. In this study, a new fatigue regression model was developed based on the results from previously performed studies. To verify the model, another laboratory flexural fatigue test program which was not used in the model development, was conducted and compared with the predictions of other existing models. Each fatigue model was applied to analysis logic of cumulative fatigue damage of concrete pavement developed in the study. The sensitivity of cumulative fatigue damage calculated by each model was analyzed for the design factors such as slab thickness, joint spacing, complex modulus of subgrade reaction and the load transfer at joints. As the result, the model developed in this study could reflect environmental loading more reasonably by improving other existing models which consider R, minimum/maximum stress ratio.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.81-91
• /
• 2011

This study was conducted to evaluate the necessity of the anchor lug system in continuously reinforced concrete pavement(CRCP) by comparing longitudinal displacements of CRCPs with and without anchor lugs, and to investigate the effect of horizontal cracking on CRCP performance by measuring the vertical displacements. The measurements before and after the anchor lug section was separated were conducted for 12 days in June, and for 14 days in August after the abrupt displacements according to cutting disappeared, respectively. This short term measurement results showed that when anchor lugs were installed, a daily displacement variation at any location was less than 0.1mm; therefore, longitudinal movements were negligibly small. When there were no anchor lugs, longitudinal displacements mainly occurred near the free end and the displacement variation was small; therefore, an expansion joint system seems to be employed at a CRCP terminus without installing anchor lugs. However, further studies are needed to verify the terminus behavior due to annual temperature changes. The horizontal crack width variation was ignorable and did not affect the vertical displacement of the slab. Therefore, the horizontal crack did not delaminate the slab and did not seem to reduce the structural capacity and performance of CRCP.