References
- 건설교통부. (2004). "콘크리트 포장 설계법 개발, 한국형 포장 설계법 1단계 3차년도 최종 보고서", 건기연 15-83, 한국건설기술연구원.
- 건설교통부. (2006). "교통량 조사 차종 분류 가이드", 건설교통부.
- 국토해양부 (2007) 교통량 통계연보, 교통량정보제공시스템, http://www.road.re.kr
- 김동호, 최성용, 윤경구 (2005) "등가 피로수명에 의한 콘크리트의 피로해석 및 모델", 대한토목학회 논문집, 대한토목학회, 제 25권, 제 3A호, 505-510.
- 박병희 (1984). "콘크리트의 피로강도 해석을 위한 수정 Goodman 도표의 실험적 도출" 석사학위 논문. 연세대학교.
- 박정우, 정영도, 임진선, 정진훈 (2009) "콘크리트 슬래브 건조수축응력 감소에 관한 초기 연구", 한국도로학회 논문집, 한국도로학회, 제 11권, 제 4호, pp. 87-94.
- 안덕순, 박희문 (2004) "현장 계측자료를 이용한 포장체 온도예측모델 개발 연구", 한국도로학회 2004 학술발표대회 논문집, 제 6권, 17-20.
- 안지환, 권수안, 김현욱, 김연복 (2002) "차로 및 방향분배계수 산정 연구", 한국도로학회 2002년도 학술발표회 논문집, 한국도로학회, pp. 41-52.
- 윤경구, 김동호, 홍창우 (2003) "실험방법에 따른 포장 콘크리트의 피로수명", 한국도로학회 논문집, 한국도로학회, 제 5권, 제 3호, pp. 11-20.
- 원대연 (1988). "환경인자가 무근콘크리트의 피로특성에 미치는 영향" 석사학위 논문. 연세대학교.
- 정길수, 김인태, 류성우, 조윤호 (2008) "유한 요소법을 이용한 줄눈 콘크리트 포장 응력식 개발", 한국도로학회 논문집, 한국도로학회, 제 10권, 제 2호, pp. 167-181.
- AASHTO (1986). AASHTO Guide for Design of Pavements Structures, American Association of State Highway and Transportation Officials, Washington, DC.
- AASHTO (1993). AASHTO Guide for Design of Pavements Structures, American Association of State Highway and Transportation Officials, Washington, DC.
- Aas-Jakobsen, L. (1970). "Fatigue of Concrete Beams and Columns." Bulletin No.70-1, Division of Concrete Structures, NTH, Trondheim.
- Asgari, A. (2004) "Evaluation of concrete pavement service life using three-dimensional nonlinear finite element analysis and nonlinear fatigue damage model." , Ph.D. Thesis, Purdue University.
- Cornelissen, H.A.W. and Reinhardt, H.W. (1984) "Uniaxial Tensile Fatigue Failure of Concrete Under Constant-Amplitude and Programmed Loading.", Magazine of Concrete Research, Vol. 36, No. 129, pp. 216-226. https://doi.org/10.1680/macr.1984.36.129.216
- Darter, M.I. (1977). "Design of Zero-Maintenance Plain Jointed Concrete Pavement, Volume 1: Development of Design Procedures.", Federal Highway Administration Report No. FHWA-RD-77-III.
- FLDOT (2009). "Rigid Pavement Design Manual." Florida Department of Transportation Pavement Management Office, Florida, 2009.
- Jeong, J.H., Lim, J.S., Sun, R.J., and Zollinger, D.G. (2010) "Modeling of Differential Shrinkage for Pavement Design" Proceedings of the Institution of Civil Engineers - Transport, in press
- Miner, M.A. (1945). "Cumulative Damage in Fatigue", American Society of Civil Mechanical Engineers, Transactions, Vol. 67.
- Mohamed, A.R. and Hansen, W. (1996) "Effect of Nonlinear Temperature Gradient on Curling stress in Concrete Pavement", Transportation Research Record 1568, TRB, National Research Council, Washington, DC, pp. 65-71.
- Murdock, J.W. and Kesler, C.E. (1958) "Effect of Range of Stress on Fatigue Strength of Plain Concrete Beams" Journal of the American Concrete Institute, Vol.30, No.2, pp. 221-231.
- NCHRP (2004). "Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures.", Final Report. National Cooperative Highway Research Program, Transportation Research Board, Washington, DC.
- Roesler, J.R. (1998). "Fatigue of Concrete Beams and Slabs.", Ph.D. Thesis, University of Illinois, Urbana, Illinois.
- Shi, X.P., Fwa, T.F., and Tan, S.A. (1993) "Flexural Fatigue Strength of Plain Concrete", ACI Material Journal, Vol. 90, No. 5, pp. 435-440.
- Shoukry, S.N. (2005). "Evaluation of Load Transfer Efficiency Measurement.", Final Report, Mid-Atlantic Universities Transportation Center
- Soerqvist, J. (2006) "Design of concrete pavements : design criteria for plain and lean concrete." Licentiate Thesis. Stockholm University.
- Tepfers, R. and Kutti, T. (1979) "Fatigue Strength of Plain, Ordinary, and Lightweight Concrete" Journal of the American Concrete Institute, Vol. 76, No. 5, pp. 635-652.
- Zhang, B., Phillips, D.V., and Wu K. (1996) "Effect of Loading Frequency and Stress Reversal on Fatigue Life of Plain Concrete", Magazine of Concrete Research, Vol. 48, No. 177, pp. 361-375. https://doi.org/10.1680/macr.1996.48.177.361