• Clinical and Experimental Pediatrics
• /
• v.50 no.11
• /
• pp.1085-1090
• /
• 2007

Purpose : Radiofrequency catheter ablation (RFCA) has become an effective therapeutic modality for treating pediatric tachyarrhythmias. Using conventional RFCA catheters, ablation of parahisian accessory pathways may be difficult and have high risk for heart block. We reviewed the efficacy and complications of the RFCA in children and adolescent with arrhythmias including parahisian accessory pathways. Methods : We studied 48 patients (aged 2 years to 20 years) who had undergone RFCA from August 2003 to March 2007. We reviewed clinical findings, electrophysiologic studies, RFCA data, complications, and follow-up results of the patients. Results : Mean age of the patients was 13.1 years. Numbers and types of arrhythmias (age, acute success rate) were as follows: 19 WPW syndrome including 5 parahisian accessory pathways ($13.7{\pm}4.6yr$, 18/19), 11 atrioventricular reentrant tachycardia with concealed bypass tract ($12.3{\pm}5.0yr$, 10/11), 13 atrioventricular nodal reentrant tachycardia ($12.6{\pm}4.4yr$, 13/13), 4 atrial flutter ($13.0{\pm}7.4yr$, 3/4), and 1 ventricular tachycardia (20 yr, 1/1). Associated cardiac structural lesion was not detected in 48 patients. The recurrence rate was 6.5%, and the final success rate was 93.8%. Conclusion : These results suggest that RFCA is a highly effective treatment method in children and adolescent with tachyarrhythmia.

• Journal of the Korean Vacuum Society
• /
• v.18 no.2
• /
• pp.85-91
• /
• 2009

There has been a rapid progress for flexible polymer-based MEMS(Microelectromechanical Systems) technology. Polycarbonate (PC) and Poly Methyl Methacrylate (PMMA), so-called acrylic, have many advantages for optical, non-toxic and micro-device application. We studied dry etching of PC and PMMA as a function of % gas ratio in the $O_2/SF_6/CH_4$ temary plasma. A photoresist pattern was defined on the polymer samples with a mask using a conventional lithography. Plasma etching was done at 100 W RIE chuck power and 10 sccm total gas flow rate. The etch rates of PMMA were typically 2 times higher than those of PC in the whole experimental range. The result would be related to higher melting point of PC compared to that of PMMA. The highest etch rates of PMMA and PC were found in the $O_2/SF_6$ discharges among $O_2/SF_6$, $O_2/CH_4$ and $SF_6/CH_4$ and $O_2/SF_6/CH_4$ plasma composition (PC: ${\sim}350\;nm/min$ at 5 sccm $O_2/5$ sccm $SF_6$, PMMA: ${\sim}570\;nm/min$ at 2.5 sccm $O_2/7.5$ sccm $SF_6$). PC has smoother surface morphology than PMMA after etching in the $O_2/SF_6/CH_4$ discharges. The surface roughness of PC was in the range of 1.9$\sim$3.88 nm. However, that of PMMA was 17.3$\sim$26.1 nm.

• Korean Journal of Social Welfare
• /
• v.60 no.2
• /
• pp.99-129
• /
• 2008

This study analyzed the resilience process of persons with disabilities using the grounded theory approach. To conduct this study, the researcher conducted in-depth interviews with 8 persons with disabilities. In data analysis, this study identified 393 concepts on the resilience process of persons with disabilities and the concepts were categorized into 45 sub-categories and 18 primary categories. In the paradigm model on the resilience process of persons with disabilities, it was identified that casual conditions included 'unawareness of disability before being disability', 'extreme pain', 'repressing psychological pain', and the contingent conditions were 'dis-empowerment by staying in home', 'isolation by himself with difficulty in accepting the disability', 'experience of frustration from social barriers with prejudice against persons with disabilities'. Also, it was identified that the resilience process could be dependent on the type and the degree of the disability, the gender, and the length of time being disability. In spite of the casual and contingent conditions, the central way in which persons with disabilities could acquire resilience was identified as 'enhancement of the power of positive thinking'. The control conditions which accelerate or retard central phenomenon were 'the awareness of not being alone through family, friends, neighborhood and the social system' externally and 'finding purpose in life through religion and help from other persons with disabilities', internally. The action/interactional sequences enhanced the efforts, self searching and active acting, and as a result, persons with disabilities could find comfort in life, participate in society and change the perspective of disability in society. The core categories of resilience process in persons with disabilities were a belief in affirmation and choice of life by initiative. In the process analysis, stages developed in the following: 'pain', 'strangeness', 'reflection', 'daily life'. This stage was more continuous and causal than discrete and complete. In this process, the types of resilience of persons with disabilities are divided into 'existence reflection', 'course development', 'implicit endeavor', and 'active execution'. This study showed the details of the paradigm models, the process and types with an in-depth understanding of the resilience process of persons with disabilities using grounded theory as well as theory construction and policy and clinical involvement on the study of persons with disabilities.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.2
• /
• pp.59-69
• /
• 2020

The regulation of business area was abolished to improve the competitiveness of the construction industry and the ability of general and specialty contractors to enter the mutual market. As the next step, the government is preparing for a reorganization of business type. If the impact of the abolishing of business area on the construction industry is analyzed, the result can contribute to determining the step by step application scope of the reorganization of business type. This study derived the business types having a high probability of the mutual market entry of general and specialty contractors. Then, the size of mutual market entry is analyzed. First, the connection between the general and specialty construction, and the similarities between the registration standards of general and specialty construction are analyzed. Based on the result, a general contractor can enter 15 business types of specialty construction, and the market size is about 78.8 trillion KRW. This is about 82% of the total contract cost of specialty construction during the year 2017 (about 96 trillion KRW). Next, based on the relevance of business contents, the market size when general contractors enter the specialty construction market is analyzed. As a result, the market size is about 24.7 trillion KRW, and this is about 13% of total contract cost of general construction during the year 2017 (about 190 trillion KRW). Based on the result of this study, there is a higher probability of the mutual market entry of general contractors into specialty construction than vice versa. However, the result of this study is based on the current contents of business types, registration standards, and construction data of before abolishing the regulation of business area. This is a research limitation. If the business contents and registration standards are changed in the future, the result could differ from the current result.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.26-36
• /
• 2017

Korea is preparing an offshore carbon capture, transport and storage (CCS) demonstration project which is recognized as one of important $CO_2$ reduction technologies to mitigate climate change. The offshore CCS project aims to transport, inject and store large amount of $CO_2$ into offshore geologic formation, and has a potential risk of leakage which might cause disastrous damage to human health, environment and property. Therefore, in order to ensure the safety of the offshore CCS project, a strict HSE (health, safety and environment) management plan and its implementation are required throughout the project life cycle. However, there are no HSE domestic laws or regulations applicable to CCS projects, and the related research is insufficient in Korea. For the derivation of the essential and urgent requirement in HSE management framework applicable to the offshore CCS project in Korea, we analysed the HSE management methodologies and foreign CCS HSE management guidelines and cases. First, this paper has analyzed ISO 31000, a generalized risk management principles. Second, we have investigated the HSE management practices of CCS projects in Norway and UK. Based on the analyses, we suggested the necessity of developing the HSE Philosophy and the HSE management process through the whole life cycle. Application of HSE management in early phase of an offshore CCS project will promote systematic and successful project implementation in a cost-effective and safe way.

• The Korean Journal of Mycology
• /
• v.43 no.3
• /
• pp.149-157
• /
• 2015

We examined taxonomic characteristics and safety of eight Nuruk molds that are widely used for making soybean paste, soy sauce and alcoholic beverages in Korea. HK1 from Hakyeong Fermentation Co., SW101 from Suwon Fermentation Co., CF1001, CF1002, CF1003 from Chungmoo Fermaentation Co. and KACC 93210 are yellow-Nuruk molds, and SW201 from Suwon Fermentation Co. and CF1005 from Chungmoo Fermentation Co. are white-Nuruk molds. Six strains of yellow-Nuruk molds were identified as Aspergillus oryzae. HK1, SW101, CF1001 and CF1003 of yellow-Nuruk molds have middle length of stipes ($711{\sim}1,121{\mu}m$), and CF1003 (for sake) produced less conidia and more hyphae than HK1, SW101 and CF1001 (for soybean paste). CF 1002 used for soy sauce has shorter stipes ($543{\mu}m$) and is clustered into IBLB-group based on omtA gene analysis although the other yellow-Nuruk molds are clustered into ICAo group. KACC 93210 isolated from traditional Korean Meju has very short stipes (average $270{\mu}m$), and showed velvety colonies although the others showed floccose colonies. The strain has different DNA sequences of omtA gene from other strains in NCBI GenBank as well as strains used in Korea, suggesting that it is unique from other strains published. SW201 and CF1005 of white-Nuruk molds were identified as Aspergillus luchuensis or A. luchuensis mut. Kawachii that is known as safe, non-toxigenic fungus. The six strains of yellow-Nuruk molds did not produce mycotoxins including aflatoxin, cyclopiazonic acid, and sterigmatocystin. Therefore, eight strains of Nuruk molds used for making soy sauce, soybean paste and alcoholic beverages in Korea were proved to be safe in this study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.54-61
• /
• 2000

Amalgam, though a widely used dental material, does not bond to the tooth substrate Therefore, retentive preparation of the cavity is necessary. Such amalgam restorations, until corrosion products form and plug the margin, will show significant marginal leakage. Unless this is prevented early on, saliva and bacteria may enter the cavity causing postoperative hypersensitivity, dissolution and collapse of the restoration, discoloration of the margin and secondary caries, leading to shortened life-span of the restoration and pulpal pathosis. Recently, a method of restoration has been introduced whereby tooth material can be preserved, cavity margin can be sealed and preventive treatment of pit and fissure can be administered while retaining all the advantages of conventional amalgam restorations. Such sealed amalgams involve removing the carious lesion without extending the cavity for prevention and using pit and fissure sealants to seal cavity margins and pit and fissures to reduce microleakage. In this study, finishing of the amalgam and sealant application were performed after different intervals following of amalgam restoration to compare the microleakage of sealed and conventional amalgam restorations. Thirty bicuspids were prepared with Class V cavity preparations on the buccal and lingual surfaces. After amalgam placement, they were divided into the following groups and treated accordingly. Group 1 : Polishing after 24 hours Group 2 : Immediate sealant application without polishing Group 3 : No polishing, but sealant applied after thermocycling 500 times After treatment, the samples were thermocycled 500 times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 30 seconds. After thermocycling, the samples were dipped into 1% methylene blue kept in a $37^{\circ}C$ incubator at 100% humidity for 24 hours. The teeth were then embedded in resin and cut bucco-lingually along the tooth axis and observed with a stereomicroscope to determine the degree of microleakage, The following results were obtained : 1. Group 2 showed the least microleakeage, while group 1 showed the greatest. 2. Group 1 showed significantly greater microleakage compared to group 2 (p<0.05). However, no significant differences were found between group 1 and 3(p>0.05). No significant differences in microleakage were also found between cup 2 and 3(p<0.05).

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.43-54
• /
• 1995

This study was conducted to examine the metal release of TiN-plated stainless steel orthodontic appliances by constructing the simulated orthodontic appliances equivalent to maxillary half arch, by dividing into TiN-plated and TiN-nonplated Bloops and by dividing again these groups into welded and nonwelded groups. And then, the total quantity of metal release was obtained by measuring the amounts of both soluble and precipitated nickel and chromium after immersing in artificial saliva for 15 days. And then, the corrosion appearance of surface structure was observed by using SEM. The results of this study were summarized as follows. 1. The total amounts of released nickel and chromium showed that the TiN-plated group after welding(Group 1) was 25.46 ${\mu}g$, respectively, and 17.4 ${\mu}g$, while the TiN-nonplated group after welding(Group III) was 54.69 ${\mu}g$, respectively, and 85.27 ${\mu}g$. Then, the TiN-Plated group indicated less amounts of metal release(p<0.05). 2. The total amounts of the TiN-plated group without welding(Group II) was 0.05${\mu}g$ and 0.34${\mu}g$, respectively. Then, it was shown that the TiN-plated group without welding(Group II) indicated less metal release than that of the TiN-Plated group after welding(Group I)(p<0.01, p<0.05). 3. When observing their surface structure, there were a lot of precipitate and pitting corrosion in the groups with welding(Group I & III), when the TiN-plated group(Group I) showed lower level than the TiN-nonplated group(Group IIII). On the other hand, the groups without welding(Group II & IV) indicated a little of pitting corrosion. 4. In case of observation with the naked eyes, it was shown that there were significant disco1oration and corrosion in the groups with welding(Group I & III), while there was no any remarkable change in the groups without welding(Group II & IV).

• Journal of Gifted/Talented Education
• /
• v.24 no.4
• /
• pp.509-541
• /
• 2014

There was a great need to consider a core competency-based approach as a new direction of the science education for gifted students according to the value and vision of the 21st century knowledge-based societies. Therefore we developed a core competency model of scientist and examined its validity as a prerequisite for a core competency-based education of science gifted students. In order to this, the survey was conducted after developing questionnaire through the theoretical review of the various resources such as paper, book, and newspaper articles and the qualitative analysis of the behavioral event interview, and then an exploratory factor analysis was performed to validate the factor structure based on the results of the survey. The results revealed that the core competency model with the 5 cluster units of competency and the 15 core competencies was potentially constituted. And the reliability, convergent validity, and discriminant validity of the core competency model were verified through the confirmatory factor analysis. The cognitive cluster consisted of 5 competencies and they were as follows: creative, comprehensive, exploratory, analytical, and conceptual thinking competency. The achievement-orientation cluster consisted of 3 competencies and they were as follows: initiative, preparation & problem solving, and strategic influence competency. The scientific attitude cluster consisted of 3 competencies and they were as follows: flexible thinking & attitude, passion for research, and views about science competency. The personal effectiveness cluster consisted of 2 competencies and they were as follows: diverse experiences and global attitude competency. Finally, the networking cluster consisted of 2 competencies and they were as follows: personal understanding and communication competency. Findings were expected to provide the basic data for developing programs and establishing strategies based on the core competency as well as introducing the core competency model of scientist to science education for gifted students effectively.

• Journal of Chest Surgery
• /
• v.35 no.8
• /
• pp.573-579
• /
• 2002

Background: In this study, the role and the surgical outcome of the modified Blalock-Taussig shunt in the treatment of the infants with cyanotic complex congenital heart diseases were investigated. Material and Method: Over the last 12 years, 105 modified BT shunts were performed in 100 infants. Postoperative course, shunt patency rate, complications, mortality and its risk factors were reviewed restrospectively. Result: The mean age at operation was 43.0$\pm$36.6 days. Sex ratio was 60:40(M:F). The postoperative oxygen saturations were lowest after mean duration of 11 hours after the shunt procedure. The operative mortality was 8%(8) with 3 late deaths. Causes of operative death included failure of maintenance of minimum oxygenation during the procedure(2), immediate postoperative shunt occlusion(2), respiratory failure(2), low cardiac output due to heart failure and pericardial effusion(2) and sepsis(2). Late deaths resulted from acute cardiac arrest during the follow up cardiac catheterization, hypoxic myocardial failure, and arrhythmia. Year of surgery, shunt size, age at operation, and complexity of the anomalies were not the risk factors for mortality. Six month shunt patency rate was 97% and overall patency rate was 96%. Postoperative complications comprised of shunt occlusion(6), phrenic nerve palsy(3), and wound infection(2). Conclusion: We demonstrated that modified Blalock-Taussig shunt was a useful tool to palliate the infants with complex cyanotic heart disease in whom early complete repair was not feasible with acceptable mortality and patency rate. An adequate postoperative management and a meticulous surgical technique may be key factors for the better results.