The system air conditioner has an outdoor unit and a number of indoor units, which connected by several long pipes. In comparison with building HAVC system, the system air conditioner doesn't need lots of facilities, such as control of room, cooling tower, etc. At the beginning stage for the market of the system air conditioner, its main application was a school which size is small to use the building HAVC and large to use home air conditioning system, such as PAC (package air conditioner), RAC (room air conditioner). Therefore, because of the advantages of the system air conditioner mentioned above, the market is expanded rapidly. Since it is difficult to evaluate the noise caused by the system air conditioner because it has to be implemented before the finish of construction, the prediction or estimation of the noise by using CAE technology should be very important. In this research, using a commercial code, RAYNOISE, the noise is estimated to improve the design of building.
Generally, noise from a home appliance has been measured by overall sound pressure level or sound power level, dB. Customers evaluation, however, of this noise should be depend on the only overall level but also the sensory feeling, annoyance, unpleasure and so on. Moreover, in this sensory evaluation, irregular, time-varying and uneven sounds which are difficult to describe itself by overall level are more affectable. Unfortunately however the formal evaluation method for this kinds of noise is not determined yet. In this research, the evaluation method for harmonic noise, which is a major noise from home appliance and one of the unmeasurable sounds by overall level, is proposed to evaluate its acceptability based on the consumer's sense of hearing. The proposed approach could be applied to the other sound, which acoustical characteristics are similar to the tonal noise.
Magnesium and its alloys are prone to be corroded, thus surface treatments improving corrosion resistance are always required for practical applications. As a surface treatment of magnesium alloys, plasma electrolytic oxidation (PEO), creating porous stable oxide layer by a high voltage discharge in electrolyte, enhances the corrosion resistance. However, due to superhydrophilicity of the porous oxide layer, which easily allow the penetration of corrosive media toward magnesium alloys substrate, post-treatments inhibiting the transfer of corrosive media in porous oxide layer are required. In this work, we employed a hydrophobizing method to enhance the corrosion resistance of PEO treated Mg alloy. Three types of hydrophobizing techniques were used for PEO layer. Thin Teflon coating with solvent evaporation, self-assembled monolayer (SAM) coating of octadecyltrichlorosilane (OTS) based on solution method and SAM coating of perfluorodecyltrichlorosilane (FDTS) based on vacuum method significantly enhances corrosion resistance of PEO treated Mg alloy with reducing the contact of water on the surface. In particular, the vacuum based FDTS coating on PEO layer shows the most effective hydrophobicity with the highest corrosion resistance.
The purpose of this study is to examine the effects of authentic leadership on employee job satisfaction as well as the mediating role of motivation in the relationship between these two variables. Prior literature on authentic leadership have repeatedly argued that authentic leadership is not simply the ethically "right" thing to do, but also can effectively boost firm performance by increasing employees' job satisfaction and motivation. This study investigates whether the proposition is supported by empirical evidence in the context of Korean companies. Survey data were collected from 230 employees from several companies in South Korea. The results show that authentic leadership has a positive effect on employees' job satisfaction. As to the effects of authentic leadership and work motivation, authentic leadership turns out to have a positive effect on both extrinsic and intrinsic work motivation. The study also confirmed partial mediating effect of job satisfaction in the relationship between authentic leadership and job satisfaction.
Background: Disinfection is essential to provide drinking water from a water source. The disinfection process mainly consists of the use of chlorine and ozone, but when chlorine is used as a disinfectant, the problem of disinfection by-products arises. In order to resolve the issue of disinfection by-products, electro-chlorination technology that produces chlorine-based disinfectants from salt water through electrochemical principles should be applied. Objectives: This study surveys the possibility of optimally producing active chlorine from synthetic NaCl solutions using an electro-chlorination system through RSM. Methods: Response surface methodology (RSM) has been used for modeling and optimizing a variety of water and wastewater treatment processes. This study surveys the possibility of optimally producing active chlorine from synthetic saline solutions using electrolysis through RSM. Various operating parameters, such as distance of electrodes, sodium chloride concentration, electrical potential, and electrolysis time were evaluated. Results: Various operating parameters, such as distance of electrodes, sodium chloride concentration, electrical potential, and electrolysis time were evaluated. A central composite design (CCD) was applied to determine the optimal experimental factors for chlorine production. Conclusions: The concentration of the synthetic NaCl solution and the distance between electrodes had the greatest influence on the generation of hypochlorite disinfectant. The closer the distance between the electrodes and the higher the concentration of the synthetic NaCl solution, the more hypochlorous acid disinfectant was produced.
삼천포천은 제방을 따라 제내지에 인공구조물이 설치되어 있으며, 하상구조가 인간활동으로 교란되어 있다. 본 연구결과 부착조류와 저서성 무척추동물의 생물다양성이 여타 하천에 비해 낮은 것으로 나타났다. 따라서 생태하천 복원 시 제방의 제외지와 제내지를 동시에 친환경적으로 복원을 고려함으로써 생물다양성 증대를 도모하고 하상 복원 등을 통해 회유성 어류들이 하천생태계로 유입되어 생태계의 안정성 및 건강성을 회복해야 할 필요가 있다(Palmer et al., 2014). 이를 위해서는 생태하천 복원시 사용되는 재료는 무생물적 재료를 지양하고 과거부터 주로 서식하는 자생식물 등을 주재료로 사용하고 하도 구조는 하상의 현재 유로형상 (flow channel pattern)을 유지하도록 유도해야 한다. 유로 연장이 필요한 경우 직강화 등에 의해 축소되어서는 안되며 축소된 유로는 복원을 권장한다. 분절된 지류는 본류와 연결시키고 연력이 곤란한 웅덩이는 대상하천에 맞게 소택형 습지를 형성하도록 유도한다. 또한 생태통로(Eco-corridor) 확보 및 추이대 조성을 통해 생태환경 기능을 개선할 필요가 있으며 제내지의 폐천 부지는 하천구역으로 편입하여 생태습지 등으로 이용을 적극 고려해야 한다(Choi and Lee, 2019). 생태적 복원을 위해 주차장, 체육시설 및 공원 등은 배제해 자연성을 유지하되 주민의 활용도를 고려하는 것도 중요하다. 이를 통하여 삼천포천의 자연성 회복을 통한 생물다양성 증진 및 주민에게 다양한 문화 휴식 공간 제공 등의 생태계 서비스 능력을 향상을 기대한다(Bennett et al., 2009).
흑피흰개미버섯(T. albuminosus) 인공재배를 위한 균사 배양적 특성을 조사한 결과, 원균배지 종류에 따른 흑피흰개미버섯 균사 생장의 영향은 KNCAF 9001와 9002 모두 MEA에서 균사 생장이 89와 81 mm로 가장 좋았고 MEA, YM, PDA 순으로 균사 생장이 좋았다. 배양 온도에 따른 흑피흰개미버섯 균사 생장의 영향은 9001와 9002 모두 89와 77 mm로서 25 ℃에서 균사 생장이 빨랐다. 30 ℃에서 균사 생장이 급감되나 40 ℃에서도 생존하는 광고온성균임을 확인하였다. 배지 pH별로 9001과 9002 모두 89와 88 mm로서 pH 6에서 균사 생장이 빨랐다. 9001의 경우 주재료는 면실피(80%)와 미강(20%) 혼합 시 99 mm/10일로서 가장 좋았으며 콘코브(97 mm), 참나무톱밥(96), 포플러톱밥(93)순으로 좋았다. 영양원은 모든 처리에서 밀기울보다 미강을 처리한 것이 좋았다. 9002의 경우 주재료는 9001과 같은 경향으로 나타났으며 다만, 9001보다 생육이 비교적 늦은 특징이 있었다. 배지의 수분함량에 따른 균사 생장의 영향은 9001, 9002 모두 수분함량이 65%일 때 101, 94 mm/10일로서 가장 좋았다. 수분함량이 65%보다 높거나 낮을 때 균사 생장 속도가 늦어지는 경향이 있었다.
관광지의 도로, 산책로 등과 같이 중차량이 통과하지 않고 많은 사람들이 통행하는 도로는 큰 내하력을 갖추지 않아도 되며, 인간공학적이고 환경친화적이어야 한다 이를 위하여 최근에 흙을 주재료로 하여 특수한 경화재와의 혼합물을 사용한 도로 포장공법이 개발되어 사용되고 있지만, 역학적인 해석과 설계가 이루어지지 않고 경험적인 방법에 의존하고 있다. 따라서 흙-경화재 혼합물의 기본적인 공학적 특성을 규명할 필요가 있다. 본 연구에서는 흙-경화재 혼합물의 주재료에 대한 혼합비를 달리하는 일련의 배합을 실시하여 공시체를 제작하고, 이에 대하여 재령별로 강도시험을 실시함으로써 혼합비와 재령에 따른 혼합물의 역학적 특성을 규명하였다. 또한 시멘트콘크리트포장에서는 양생하는 과정에서 수화열이 발생할 뿐만 아니라 그 지지기반인 흙과의 온도에 따른 거동의 차이로 인한 공학적 문제들이 야기됨으로, 흙-경화재 혼합물과 흙의 온도 특성을 비교 분석하였다. 본 연구 결과, 혼합물은 시멘트의 증가에 따라 강도가 증가하고, 수화열을 억제하기 위하여 제한된 시멘트량에 대해서는 경화재와 물의 혼합비가 6%$\sim$8%일 때 가장 큰 강도를 나타내었다. 또한 혼합물의 강도는 14일까지는 재령에 따라 비교적 급격하게 증가하다가 그 이후에는 증가율이 감소하여 28일 후에는 증가율이 급격히 저하되었다. 그리고 본 연구에서 사용한 시멘트량에 대해서는 수화열이 매우 미미하게 나타났으며, 흙과의 온도 특성이 비슷한 것으로 나타났다. 따라서 본 혼합물은 시멘트 콘크리트보다 내하력에서는 크게 못 미치지만 온도 변화에 따른 공학적 문제들을 개선할 수 있으며, 흙을 주재료로 사용하므로 경하중이나 교통량이 적은 포장도로에서 환경친화적인 포장재료로서 우수하게 사용될 수 있을 것으로 판단된다. 말기암환자와 가족을 지지하는 프로그램으로서 활용가치가 높다고 볼 수 있다. 추후 연구는 프로그램의 효용성에 대한 평가가 검토되어야 할 것이며, 다른 병원에서도 각 병원의 특성과 참석자들의 특성을 고려하여 보다 발전된 프로그램이 나오기를 바란다.있어서 진단내용, 환자의 기능적 상태, 합병증 유무 등에 따라서는 큰 차이 없이 회복촉진, 합병증예방상담 및 건강관리지도 항목에서 가장 높은 요구도를 나타냈고 나머지 간호요구는 큰 차이가 없었다. 사망하였다. 한 명(T1N0M0, stage Ib)은 술 후 방사선요법 중에 21개월 째에 양측폐에 다발성 결절을 보이는 전이로 치료 중 사망하였다. 술 후 평균 추적기간은 50.87$\pm$24.77개월이었다. 전체 생존율을 분석해보면 3년에 $97.1\%$, 5년에 $83.7\%$였다. 병기1기 환자의 경우 2년에 $96.3\%$, 5년에 $96.3\%$로 나왔다. 전체 환자의 재발 없는 생존율을 분석해보면 1년에 $100\%$, 2년에 $90\%$, 5년에 $76\%$이고 병기 1기의 경우 2년에 $96.4\%$, 5년에 $90.6\%$였다. 술 후 항암화학요법을 시행한 환자는 7명으로 $22.58\%$이고, 술 후 항암방사선요법을 시행한 환자는 1명으로 $3.22\%$, 2가지 모두 시행한 환자는 2명으로 $6.45\%$였다. 재발부위는 폐전이 3예, 골전이가 1예, 뇌전이가 1예였다. 결론: 기관세지폐포암은 동일병기의 다른 비소세포암보다 수술 절제 후에 비교적 재발률이 적고
삼림 생태계에서 토양 CO2 유출량의 연속적인 모니터링을 위한 다중채널 자동챔버시스템 (MCACs)을 개발하였다. MCACs는 자동개폐 덮개가 있는 8개의 토양챔버, 8개의 다중채널 가스샘플러를 장착한 적외선 CO2 농도 분석기, 시간 릴레이 회로를 갖춘 전자 컨트롤러, 프로그래밍이 가능한 로직용 자료수집장치로 구성되었다. 사계절 장기간에 걸쳐 야외 현장에서 MCACs의 안전성과 신뢰도를 조사하고, 높은 시간분해능으로 현장 테스트에서 얻은 온도와 토양수분 함량이 토양 CO2 유출에 미치는 효과들을 파악하기 위해, 2010년 1월부터 12월 사이의 기간 동안 남산의 신갈나무림 실험지소에서 MCACs를 사용하여 토양 CO2 유출속도와 미기상 요인들을 지속적으로 측정하였다. 토양 CO2 유출속도의 일변화 및 계절적인 변화는 현저하게 온도 요인의 경향을 따랐다. 전체 실험 기간 동안에 토양 CO2 유출속도는 5 cm 깊이의 토양온도와 밀접한 상관관계 (r2 = 0.92)를 보였으나 토양수분 함량과는 약한 상관관계 (r2 = 0.27)를 나타냈다. 남산 신갈나무림에서 온도에 대한 토양 CO2 유출량의 연간 민감도(Q10 수치)는 2.23~3.0의 범위에 달했고, 다양한 온대지역의 낙엽활엽수림에 대한 다른 연구들과 일치하였다. MCACs에 의해 측정된 연평균 토양 CO2 유출량은 약 11.1 g CO2 m-2 day-1이었다. 이 결과들은 MCACs가 야외 현장에서 토양 CO2 유출량의 연속적인 장기측정과 동시에 미기상 요인들의 영향을 결정하는데 유용한 시스템임을 나타낸다.
폐 한방슬러지의 pH는 5.3으로 주재료인 콘코프의 pH 5.2와 비슷하였으나, 환원당 함량은 4.8 mg/g으로 콘코프의 1.9 mg/g 보다 2.5배 높게 나타났다. 평판배지를 사용하여 폐 한방슬러지의 첨가농도를 검토한 결과 폐 한방슬러지를 첨가하지 않은 대조구보다 5, 15 및 10%(w/w) 첨가 순으로 팽이버섯 균사 성장이 왕성하였다. 콘코프 및 미송톱밥배지에 폐 한방슬러지를 각각 10% 첨가하여 제조한 배지를 시험관에 충진시킨 다음 팽이버섯 액체종균을 접종하여 $25^{\circ}C$에서 6일 동안 배양한 결과 대조구에서는 약 2.2~3.4 cm, 시험구에서는 약 5.8~6.4 cm의 균사성장이 이루어졌다. 그리고 팽이버섯뿐만 아니라 표고버섯 및 녹각버섯(영지버섯 일종)을 접종한 시험구에서도 동일한 결과를 얻었다. 폐 한방슬러지를 10% 첨가한 배지로 현장실험을 행한 결과 팽이버섯의 수확량은 대조구보다 약 5%정도 떨어졌지만 기형버섯 발생율과 2등품 버섯의 생산량은 시험구에서 월등하게 적었다. 팽이버섯의 생산량이 16만병/1일 행하는 재배사를 기준으로 경제성 분석을 행한 결과 당해 년에는 약 5천만원이 절약되고 그 다음해부터는 인건비와 운영비를 제외한 약 1억3천만원의 생산단가 절약이 예상되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.