• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.39-43
• /
• 2010

This paper presents an LMI-based method to design an adaptive sliding mode controller for a class of uncertain systems. In terms of LMIs an existence condition of a sliding surface is derived. And an adaptive switching feedback control law to guarantee the asymptotic stability as well as to estimate the norm bound of disturbances is proposed. Finally, a numerical design example for controlling a overhead crane model is given to show the effectiveness of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.96-102
• /
• 2015

This paper presents battery charging method using 3-phase AC-DC boost converter. General battery charging method is that charging the battery voltage to the reference voltage according to the constant current(CC) control, when it reaches the reference voltage, charging the battery fully according to the constant voltage(CV) control. However, battery chaging time is increased because of the battery impedance, constant current charging section which shoud take the large amount of charge is narrow, and constant voltage charging section which can generate insufficient charge is widen. To improve this problem, we proposes the method to reduce the charging time according to the SOC(State of Charge) estimation using battery impedance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.185-191
• /
• 2010

This paper describes a new position sensorless control for the switched reluctance motor (SRM) by monitoring the rate of change of current with respect to the inductance variation. Two consecutive switch-on times in hysteresis current control are compared to calculate the rate of change of current and hence to estimate the rotor position and speed. The proposed sensorless control algorithm is simple to implement as it does not depend on extensive computation or additional hardware. Simulation and experimental results are presented to demonstrate the feasibility of the proposed sensorless control method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.357-361
• /
• 2007

Transverse Linear Motor(TFLM) has been using in many areas of manufacture such as LCD, PDP construction and etc. However, the areas of TFLM application become wider, it needs a modification for new application. Above all, the conventional position estimation method is expensive in proportional to the length of the motor. Therefore, we need new position estimation algorithm using hall effect sensor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.421-423
• /
• 2007

The paper used to the Neral Netwok for a forecasting conservation system A neural network is a powerful data modeling tool that is able to capture and represent complex input/output relationships. The motivation for the development of neural network technology stemmed from the desire to develop an artificial system that could perform "intelligent" tasks similar to those performed by the human brain. The true power and advantage of neural network lies in their ability to represent both linear and non-linear relationships and in their ability to learn these relationships directly from the data being modeled. Form results of this study, the Neral Netwok is will play an important role for insulation diagnosis system of real site GIS and power equipment using $SF_6$ gas.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.4
• /
• pp.31-40
• /
• 2013

This paper proposes a performance improvement of synchronous generator using exciter control with field coils parameter estimation technique. In general, the generator excitation system controller uses the PID controller. When the Field winding impedance changed, the PID gains must be changed. General method is difficult to apply varying capacity of the synchronous generator. The proposed control method determine automatically measure the internal impedance of the synchronous generator's exciter and configure the controller. This method can be applied regardless of the generator capacity. So it is possible to apply a variety of synchronous generator systems. The validity of the proposed algorithm is verified by simulations and experiments.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1446-1449
• /
• 2015

본 논문에서는 BIM TOOL 중 하나인 AUTODESK사의 Revit Softwere를 활용하여 건축물에서 필수적으로 사용하고 있는 전기 설비 중 조명설비를 대상으로 전력소비에 따라 발생하는 온실가스인 이산화탄소($CO_2$), 메탄($CH_4$), 아산화질소($N_2O$) 배출량을 추정하여 건축물 에너지절감의 필요성을 강조하고 증명하고자 한다. BIM을 적용 할 수 있는 설계, 시공, 유지보수 외에 사용자의 전력소비에 따른 배출량을 연계한 데이터를 추출하여 온실가스 감축을 위한 전력절감의 TOOL 활용과 국가 정책, 제도 및 지침에 적극 활용되기를 기대한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.111-117
• /
• 2003

The Taylor model concept is introduced to design a controller with input and output data only. The parameters in Taylor model can be estimated using the input and output data and a controller can be designed based on Taylor model. The accuracy of Taylor model approximation can be improved by increasing the observation window and the order of Taylor model. The LQR method is applied to Taylor model to design power system stabilizers (PSS), and compared with the conventional PSS.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.317-320
• /
• 2008

This paper presents the battery management system(BMS) for the optimum conditions of the lead-Acid battery in UPS. The proposed system controls the over and under currents of battery for protecting and it was applied algorithm for optimum conditions to estimate the State Of Charge(SOC) and State Of Health(SOH) in charge or discharge mode. It approved the performance and the algorithm for the estimation of SOH, through the experiments which using the charge and discharge tester and the field tests.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.8
• /
• pp.8-14
• /
• 2010

In this Paper, optimal capacity of battery storage in Je-Ju is calculated. First, Electricity demand data of Je-Ju('06~'16) is estimated based on real electricity demand data of Je-Ju('06~'07). Then, the 4th power supply planning is used to calculate benefits from battery storage capacity in view of maximum power savings, preventing outages savings and energy charge fee reduction. Finally, optimal battery storage capacity is suggested.