• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.15-22
• /
• 2013

A new LED lamp driving technology with a charge pump instead of a conventional DC-DC converter is proposed. The proposed driving technology is used to control the LED lamp with digital dimming. The power loss in the zener diodes is reduced because the charging process of the capacitors is selectively controlled according to the digital control signal. From the experimental results, when dimming four LED lamps simultaneously, the average driving circuit efficiency of 89% is obtained, regardless of the dimming level. White light with color temperature over a range of 2800~7200K was produced by dimming control of red, green, blue and amber LED lamps with the proposed driving circuit. The characteristics of the driving circuits can be changed depending on the characteristics of the R, G, B, and A LED lamps. The efficiency of the driving circuits up to a maximum 89% can also be obtained depending on the combination of LED lamps. The driving technology with digital dimming control for LED lamps proposed in this paper would be effective for obtaining high efficiency in LED driving circuits and remote control of LED lamps using digital communications.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.4
• /
• pp.327-331
• /
• 2014

LED(Light Emitting Diode) is a semiconductor device utilizing electroluminescent effect is a phenomenon in which a type of P-N junction diode, the light of short wavelength which a voltage is applied in the forward direction is released. LED is advantageous in reducing the energy as environmentally materials that can greatly reduce the carbon emissions, recent it has attracted attention IT(Information Technology) and GT(Green Technology) industry. In addition, there are advantages long life, high efficiency, and excellent response speed, LED have come into the spotlight as the illumination means to replace the existing fluorescent light and incandescent light bulb. When connecting to MR16 electronic transformer for existing LED driver circuit, due to malfunction of the dimmer and the electronic transformer, flicker occurs and linear dimming is not possible. Therefore, in this paper, we suggest an LED drive circuit there is no flicker with the corresponding dimming MR16 electronic transformer. Further, we explain the principles of the LED current control technique and the principle of the drive circuit of the LED, in order to validate the proposed circuit through prototyping and simulation.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.445-452
• /
• 2006

A new Energy-Dissipating Sacrificial Device(EDSD) is proposed, which can effectively dissipate the energy stored in the structures during seismic actions. A mathematical 3-D bridge models and analysis techniques are developed to represent the non-linear behavior of the EDSD, various seismic responses of a sample bridge with the EDSD are analyzed in terms of energy, member forces and deformation using the developed analysis method. And the EDSD is tested and certified it's behavior and stability to apply on exiting bridges. The EDSD can be able to dissipate a large amount of energy and therefore it can prevent the pier's excessive forces under seismic excitations and EDSD and its connected members are also stable. Additionally, the method and guidelines of an optimum EDSD design are proposed in terms of installation method and decision of number of EDSD. The Proposed EDSD under seismic excitations can significantly decrease the excessive storing energy in the bridge structures and reduce the relative displacements of each superstructure to the ground. The EDSD is also found to function as a structural fuse under strong ground motions, sacrificing itself to absorb the excessive energy. Consequently, economical enhancement of the seismic performance of bridges can be achieved by employing the newly developed energy dissipation sacrificial device(EDSD).

• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.114-123
• /
• 2013

In these days, most of the office buildings are being required to save energy for maintenance. lighting system constitutes 20% to 30% of the total annual electrical energy consumption in office buildings. As an energy saving strategy for lighting system, dimming control system based on illuminance sensors came into use. But the system is accompanied with many illuminance sensors to control lighting and needs a lot of initial investment. In this study, the prediction equation for indoor daylighting illuminance distribution is proposed through the review for conventional research results and field measurements. The proposed equation was verified by the comparison between predicted results and field measurement results. The developed prediction equation for daylighting can be used to control the indoor illuminance level with the limited sensor when dimming control system is operated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.123-133
• /
• 1992

This study was conducted to clarify progressed changes of plant types and the effects of the physiological and ecological components on improving ideotype of winter wheat. 12 wheat varieties were planted at the experimental farm of Wheat and Barley Research Institute in Suwon in 1990. As results of intensive wheat breeding for early maturity since 1959, heading, flowering and maturing dates have been shortened by 17, 15 and 14 dagys, respectively. The shortened days from sowing to heading and from heading to flowering contributed to the early maturity to improved. Physiological factors associated with heading time of wheat could be reprsented by growth habit, photoperiod responses, earliness in narrow sense and winter hardiness. For improving an early maturity of winter wheat, it would desired to maintain some degree of winter habit(III-IV), and recombination of more insensitivity to short day length and more shortened earliness in narrow sense than that of Saemil and Chugoku 81, and higher degree of winter hardiness. For improving the early maturity the more effective way must be of shortened days from sowing to heading, and days from flowering to maturity than days from heading to flowering. Ideotype of wheat will be desired to recombine two semi-dwarf genes with erect plant type being about 70-80cm, less stem elongation by late spring, long spike and many grains per spikelet. Average spike weight ratio was about 45-49% in high-yielding varieties, stem fresh weight was lighter, but spike fresh weight was heavier in new one while leaf fresh weight was similar to each other during the maturing periods. Average spike dry weight ratio was higher about 40～48%, and stem and leaf blade dry weights were lower in the newly bred varieties. Stem dry weight was heavier than spike or leaf dry weight in the old varieties of Yungkwang, Jangwang and Jinkwang. Leaf area index for the varieties showed normal distribution curve as the maximum point in booting stage. The maximum point of this curve come in early maturing wheat, and late in old one. The maximum points of LAI were 6.4～6.8 in the high-yielding varieties. Totals of LAI in each period investigated of old one were higher than those of newly bred being 24.6～28.8. Chlorophyll content of the high-yielding varieties of Chokwang, Geurumil and Saemil as higher than that of the old varieties Jangkwang, Jinkwang, Wonkwang and Sinkwang from regrowing period to April 21. after then slightly and even after heading. Net assimilation rate (NAR) was higher in high-yielding varieties with good plant type, and lower in old ones. Grain yield of the newly released varieties increased rapidly but slowly in the old ones. Change in water content of grain at the growing stage in newly bred was lower than that of the old bred. Diminishing rate of water content of grain in establishment per day was 1.2% average that of the old varieties including Yungkwang was 1.5%, and those of the newly bred including Chokwang were 0.9～1.1%. Chokwang, Naemil, and Saemil were the highest-yielding varieties of the Korean cultivars. Yields were increased by spikes per m$^2$, grain weight for the varieties bred in Suwon, and by spikes per m$^2$ for the varieties bred in Milyang.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.1
• /
• pp.23-29
• /
• 1995

There are many articles about the HID lamps about it's characteristics and simulation methods for lamp design or ballast design. For the electronic ballasts of HID lamps, There are some problems caused by acoustic-resonance which destabilizes the arc of HID lamps. So, some studies suggest the methods to avoid it. For example, the methods suggested are high frequence driving over 100[kHz], and mixed frequence driving which alternates high frequence and low frequence, and squarewave driving etc. This study suggests the electronic ballast of HID lamps that solves the problems of acoustic-resonance, and can control the luminance by constant current boostes chopper of which frequence is 30[kHz] and by the squarewave driving of which frequence is 55.5[Hz.] As follows, we have the good electronic ballast for HID lamps which has the characteristics of a light weight, and a function of luminance control and a high quality luminosity and which saves electrical energy.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.11-21
• /
• 2012

In the normal office building, the energy consumption to maintain the reasonable intensity of illumination for the work by using the artificial illumination occupies 30% or greater of the whole building electric energy consumption. If the dependability of the artificial illumination is dropt by positively using the natural lighting from the outside, the large amount of electrical energy can be saved, in addition the more nice visual environment for work can be created. Daylight is lighting source that most closely match visual response of the human, because sunlight and skylight achieve the harmony. For this reason, the daylight of small amount than amount of the artificial lighting source also can give the same effect in work activities of human. In addition, if there is daylight at the window of the building, the energy can be saved by controlling the artificial lighting. In this paper, in the building using the photovoltaic power generation analyze the correlation between the amount of energy generated by photovoltaic and indoor illumination and this was proved through the simulation with Relux 2010. In addition, the amount of daylight inflow in the room and distribution was drawn by the equation and the ratio for the sectional dimming control of each lighting equipment was predicted and the energy saving amount according to this was calculated. As a result, the indoor illumination was satisfied with recommended illumination value of the office and consumption power could be reduced approximately with 20~70%.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.274-282
• /
• 2012

In this paper, we propose the design of lighting control algorithm for intelligent LED lighting system. The proposed lighting control algorithm transmitted to MCU through a data bus the environmental information detected from respectively sensor node. The MCU control software was designed to determine the level maintained to depending on the set control method by comparing the results that calculated the dimming level using a signal value. Also, it was designed to be lighting by cross-performed periodically the rotation and reverse method by created fully symmetrical pattern using the control algorithm to LED lighting device. In this paper, the proposed lighting control algorithm improved the reliability of the data sent by designed the system that can be controlled lighting to stable, and it was maintained the event delivery ratio of 91%. Also, the lighting device was decreased the luminous intensity of 32%, the power consumption of 49%, and heat generation of 32%. As a result, it were could be improved the energy efficiency that the life-cycle of LED has been increased 50%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.245-249
• /
• 1995

The number of immature spikes of barley (Hordeum vulgare L.) and wheat (Triticum aestivum L) were studied to determine if there could be existed the significant difference among 5 varieties of barley and wheat each. Heritability of 6 characters including the number of immature spikes have also calculated. Correlation between the immature spikes and 5 other characters were also investigated. There were significant difference among 5 varieties of barley and wheat in the number of immature spikes. Heritability estimated were very high in case of number of immature spikes of barley and that of wheat was high. There were highly significant correlation between the number of immature spikes of barley and number of internode and significant correlation between the number of immature spikes and flag leaf. However, in wheat no correlations were found among the 5 characters in wheat and between the number of immature spikes and number of internode were negative.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.368-373
• /
• 1983

To study the grain development and quality during wheat grain-filling under different sowing date and region, the experiments were conducted from 1978 to 1979. The grain weight at the early grain-filling stage in Suweon was heavier than in Gwangju, but the weight at the late grain-filling stage was reversed. The ranges of the physiological maturing period in the optimal sowing for 2 years were from 43 to 49 days in Suweon and from 44 to 51 days in Gwangju. These showed the tendency of lengthened grain-filling periods in southern region, and the periods were 1-4 days longer in optimal sowing than those in late sowing. Wheat grain quality was affected significantly by environmental conditions. The milling rates were increased in southern region where the plumpness of grain was better, the protein content and sedimentation value were higher in northern region where the temperature during grain-filling was high.