• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.10a
• /
• pp.131-132
• /
• 2016

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.189-202
• /
• 2016

To figure out the material characteristics about slag and raw materials which are founded in iron product sites in Seosan area, we used XRF, EDS to analysis chemical compositions. Also we observe the microstructure by microscope and SEM. To identify the mineral component, XRD analysis was used and to assume the provenance of the raw material, lead isotope ratio analysis was used. From the results, we figure out that slags are non-ferrous created when metal was refined. Also, main tissue of slags were Fayalite, Galena, Magnetite, and raw materials were identified as mineral of Galena, Anglesite, Pyrite etc. From the result about lead isotope ratio analysis, we found out most samples are classified as the Western Gyeonggi massif in South Korea. Especially three of raw materials and slag samples which collected in the Seosan Doseongri was presumed to be the provenance. We figure out that slags we analyzed were made in non-ferrous metal smelting process and especially that were more likely to smelt from Seosan Doseongri. If various slags in this area are analysed by someone, It will contribute understanding non-ferrous metal refining process as well as metal refining which are composed.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.519-532
• /
• 2017

Studies on ancient ironmaking technologies are primarily based on archaeological surveys and scientific analysis data, and technological systems are examined by comparing the results of restorative experiments. In this study, to examine the ancient iron production technologies such as smelting and smithing in the Jungwon area, a restoration experiment was conducted based on archaeological data, and the iron and slag, etc. produced in the experiment were analyzed. Further, the changes in physicochemical properties due to the smelting of the raw material, specifically, iron ore were determined, and the smithing process, which involves fabrication of ironwares, was analyzed along with the characteristics of each step. In the case of smelting, increasing recovery rates and production of high-quality primary iron material were important for the following processes. For the iron bars produced through the smithing process, it was found that quality improvements made by reducing physical defects such as inclusions or gas holes were more important than the composition of the iron itself. The study also yielded comparative study data for various byproducts, such as smithing slag, which could be utilized in other ironmaking technology studies.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.738-747
• /
• 2021

This study attempted to investigate the metallurgical characteristic through material scientific analysis of hammer scale produced as a direct smelting method restoration experiment for each raw material of iron. To this end, four hammer scale groups were set up, respectively, by experimenting with Gyeongju-Gampo Iron sand and Yangyang Iron ore. For the analysis, principal component analysis, compound analysis, microstructure observation, and chemical composition were confirmed. As a result of principal component analysis, as forging and refining progressed, the content of Fe increased and the content of non-metallic objects decreased. As a result of compound analysis, iron oxide-based compounds were identified. As a result of confirming microstructure and chemical composition, Wüstite and Fayalite were observed overall, and agglomerated Wüstite were observed in some. Magnetite on shape of polygon and pillar was observed. In addition, it was confirmed that internal defects, impurities, and non-metallic interventions gradually decreased. In the future, it is necessary to investigate the metallurgical characteristic through material scientific analysis of hammer scale produced through restoration experiments using various raw material of iron, and compare them with those excavated from Iron manufacture ruins.

• Resources Recycling
• /
• v.28 no.4
• /
• pp.3-14
• /
• 2019

Lead is one of the common non-ferrous metals used in modern industry. The usage of lead continues to increase and has risen from 5 million tonnes per year worldwide in the 1970s to 11 million tonnes in the 2010s. In principle lead is virtually 100 % recyclable as an element without loss of quality. The recycling of lead scrap reduces the energy consumption and environmental burden, comparing to the primary metal production. Therefore production of secondary lead from scrap has been steadily growing and at present it meets approximately 60 % of usage worldwide. Lead scrap (mainly lead-acid battery) is smelted in primary and secondary smelter. Most secondary lead smelting were performed in a shaft-type furnace (blast furnace), rotary furnace and reverberatory furnace. The lead bullion is either cast into ingots and re-melted in refining kettles or refining is performed on the hot lead bullion immediately after production. This work provides an overview of the primary lead production and recycling process.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.3-15
• /
• 2022

Lithium is the lightest metal and the first metal in the periodic table. Lithium is used in a variety of applications, including the production of organolithium compounds, as an alloying addition to aluminum and magnesium, and as the anode in rechargeable lithium ion batteries especially for electronic devices and electric vehicles. Therefore, lithium is indispensable metal in our daily lives. The use of lithium continues to rise and has increased from about 14,000 tonnes per year worldwide in the 2000 to about 82,200 tonnes in the 2000. However, lithium is a representative rare metal and ranks 32nd among the abundant elements in the earth's crust. This study reviews the current status of the lithium extraction processes as well as the trend in production amount and use. Lithium is extracted by a various methods depending on the type of resources. These extraction methods are essential for the development of new recycling processes that can extract lithium from secondary lithium resources.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.10a
• /
• pp.245-246
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.10a
• /
• pp.129-130
• /
• 2016

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.95-96
• /
• 2016

• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.31-37
• /
• 2001

The metallurgical investigation of four lumps of bronze from the third building site of the northern workshop site at the Neungsan-ri temple site in Buyeo was performed. The microstructures of a section of sample was observed by SEM and qualitative and quantitative analysis of the sample was performed by EDS. The results are as follows: Sample 1 of the lump of bronze from northern workshop site in the third building site at Neungsan-ri temple site and sample 2 are speculated to be low-quality bronze resulting from refinery of matte which formed on the process of bronze refinery. Sample 3 is speculated as a lump of bronze which is one of Cu-Sn system and the one made by alloy only with pure bronze and tin on the process of bronze refinery. Sample 4 is confirmed as a lump of bronze which is one of Cu-Sn-Pb system from alloy of tin and lead into pure bronze. It is believed that the third building site at Neungsan-ri temple site in Buyeo produced bronze matte by refinery of copper ore or produced low-quality bronze by melting matte imported from outside.