• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.69-76
• /
• 2019

In this paper, a design method for an enhanced-sensitivity microwave sensor based on microstrip defected ground structure was studied for the permittivity measurement of planar dielectric substrates. The proposed sensor was designed by modifying the ridge structure of an H-shaped aperture into the shape of a capacitor symbol. The sensitivity of the proposed sensor was compared with that of a conventional sensor based on a double-ring complementary split ring resonator(DR-CSRR). Two sensors were designed and fabricated on a 0.76-mm-thick RF-35 substrate so that the transmission coefficient would resonate at 1.5 GHz in the absence of the substrate under test. Five types of taconic substrates with a relative permittivity ranging from 2.17 to 10.2 were selected asthe substrate under test. Experiment results show that the sensitivity of the proposed sensor, which is measured by the shift in the resonant frequency of the transmission coefficient, is 1.31 to 1.62 times higher than that of the conventional DR-CSRR-based sensor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2298-2304
• /
• 2011

This paper describes and presents the design of a miniaturized low pass filter (LPF) for microwave frequency region using a common defected ground structure (CDGS). In this study a half-sized LPF is obtained using CDGS, while the previous LPFs with the conventional DGS showed a mild size-reduction. The common DGS (CDGS) is realized on the common ground plane of two microstrip lines, i. e double-sided microstrip lines, which exist back-to-back to each other. In order to show the validity of the proposed design, an example of LPF using CDGS and double-sided microstrip lines is designed, fabricated and measured using the dielectric substrate with the dielectric constant of 2.2 and with the thickness of 31mils. The size of the designed LPF using CDGS is only 52.6% compared to that of the previous LPF with the conventional DGS. In addition, it is shown that the performances of the proposed LPF are well preserved after the size-reduction with the measured S11 and S21 of -22dB, min and -0.19dB, max, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.904-911
• /
• 2003

A new method to reduce the size of microwave amplifiers spiral-shaped defected ground structure(Spiral-DGS) is proposed. A microstrip line having Spiral-DGS on the ground plane produces increased slow-wave factor and electrical length for the fixed physical length. In addition, it provides an excellent rejection characteristic for a finite frequency band like band rejection filters. The rejection band is used for rejecting harmonic components of amplifiers. The reduced microstrip line lengths in matching networks by Spiral-DGS are 39 % and 44 % of the original ones in input and output matching networks, respectively. It is shown that the measured S-parameters of the reduced amplifier agree well with those of the original amplifier. The measured second harmonic of the reduced amplifier is much less than that of the original amplifier by at least 10 dB. The same technique is applied to reject the third harmonic using the proper Spiral-DGS for the third harmonic frequency. The measured third harmonic is smaller than that of the original amplifier by 25 dB.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.463-468
• /
• 2023

In this paper, we proposed reconfigurable dual polarization patch array antenna that can select two polarizations(Vertical, RHCP) using defected ground structure and Pin diode. The proposed antenna was designed arranging a circular polarization patch antenna implemented with a square microstrip patch and two slots 3x3 at 25.8mm placed, a half-wavelength of 5.8 GHz. Conect the pin diode and the capacitor to the slot diagonally placed on the ground of each antennas, and select polarization using the open/short operating according to the application of DC voltage to the pin diode. As a result of the design, the gain of the antenna is 11.7 dBi at vertical polarization and 11.6 dBic at RHCP. The axial ratio is 20.3 dB at 1.8 dB vertical polarization at RHCP. Mutual Coupling is Maximum to -20.8 dB for vertical polarization and Maximum to -30.1 dB for RHCP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1909-1913
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shared slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is de#eloped to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1617-1618
• /
• 2011

케이블의 고장 검출과 예방진단을 위하여 방전펄스의 극성을 분석하고 시간차를 구하여 방전원의 방향 및 위치를 추정할 수 있다. 본 논문에서는 현장에서 적용되는 22.9[kV] 배전전력케이블을 모의실험실에 구성하였다 모의결함 가공 후에 부분방전 발생전압까지 가압 후 신호측정 및 분석을 하였으며 두개의 동일한 센서를 사용하여 하나는 단말기 접지 쪽에 고정취부 하였고 나머지 하나는 중간 접속부 안팎을 각각 측정하였다. 또한 케이블 간격별로 측정을 하였으며 측정된 방전펄스의 파두 극성을 분석하여 부분방전펄스의 방향 분석을 하였다. 측정에 적용된 센서는 HFCT센서를 적용 하였으며 측정펄스 분석은 오실로스코프를 이용하여 확인 하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1646-1647
• /
• 2011

본 논문에서는 공통의 결함접지면구조(Defected ground structure, DGS)를 이용한 1:2 비대칭 전력 분배기를 설계하였다. 기본적인 비대칭 전력분배기를 설계하고 DGS를 삽입하여 크기를 줄이고 반으로 접은 구조로 회로의 크기를 대폭 줄일 수 있는 구조 이다. 사용한 기판으로는 Rogers 5880 31mils(0.7874mm)를 사용하여 1GHz 주파수대의 1:2 비대칭 전력 분배기를 설계 및 제작하여 우수한 특성을 확인 할 수 있었다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1814-1819
• /
• 2007

A new active resonator using defected ground structure with islands (DGSI) is proposed. The proposed resonator is composed of the conventional microstrip line with DGSI and negative resistance of active devices. The negative resistance part is realized by field effect transistor (FET) series feedback circuits. The characteristic of the proposed resonator with DGSI is improved by combining the negative resistance part with the parallel microstrip line structure with islands, where the electric field is formed the most strongly. The measured improvement of the proposed active resonator with DGSI are 4.55dB and 0.32dB in S21 and S22, respectively, at the resonant frequency whorl it is compared to the existing passive resonator having DGSI only.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.367-370
• /
• 2010

In this paper a four-pole elliptic function bandpass filter is designed with two ground slots. A research of microstrip bandpass filters (BPF) using defected ground structures (DGS) is presented. DGS technique allows designs of tight couplings without the necessity of using very narrow coupling gaps. The simulator Sonnet is used to design the resonator and to calculate the coupling coefficient of the basic coupling structure. Compared to similar microstrip filters without defected ground structure, the simulated performances of these novel structures indicate some technological advantages.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.158-161
• /
• 2006

In this paper, we deal with EMI Analysis on Microstrip with Defected Ground plane. Specially, we investigate reflection, transmission, crosstalk, radiated emission on Microstrip with Defected Ground plane structure. And investigates undesired effects on various defected ground plane such as ground with split, slot, short end and open end gap. To analyze reflection, transmission and crosstalk of microstrip with defected ground plane, we used concept of the microstrip to slot line transition model. Besides, investigate radiated emission using FDTD Commercial tools such as CST MW