• Title/Summary/Keyword: 전용특성

Search Result 903, Processing Time 0.026 seconds

Traffic Signal Control Strategy for Passive Tram Signal Priority on City Arterial (도시부 간선도로의 고정식 트램 우선신호를 위한 교통신호운영 전략)

  • Jeong, Young-Je;Kim, Young-Chan;Kim, Dae-Ho
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.10 no.1
    • /
    • pp.27-41
    • /
    • 2011
  • This research proposes new tram signal coordination model, called MAXBAND MILP-Tram for a passive tram signal priority strategy. The proposed model was formulated based on the MAXBAND model that was a traditional arterial signal optimization model. The model could calculate the bandwidth solutions for both general-purpose-lane traffic and median-tram-lane traffic. Lower progression speed are applied for the tram traffic considering lower running speed and dwell time at the stations. A phase sequence procedure determines the green times and left-turn phase sequences for tram traffic in median tram lane. To estimate the performance of the MILP-Tram model, the control delay of trams were estimated using the micro simulation model, VISSIM. The analysis results showed 57 percent decrease of the tram compared to the conventional signal timing model. The delay for car, however, increased 18 percent. The sensitivity analysis indicated that the passive tram signal priority strategy using the offset and phase sequence optimization was effective in reducing the person delay under the congested traffic condition.

Influence of Bubble Sheet Applying Methods on Temperature of Exposed Joint Rebar at Wall Surface of Load-Bearing Wall Structure Building During Winter (동절기 벽식구조 건축물 벽부분의 버블시트 포설방법 변화가 이음부 노출철근의 온도에 미치는 영향)

  • Han, Cheon-Goo;Lee, Jea-Hyeon;Kim, Min-Sang
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.2
    • /
    • pp.149-155
    • /
    • 2017
  • In this research, the surface covered curing method using the double-layered bubble sheet was evaluated. This double-layered bubble sheet has outstanding insulating performance with its low heat conductivity and high economic feasibility with its high durability. However, in the case of wall-typed building construction, the area of exposed rebar is curious on curing performance with the double-layered bubble sheet in spite of the double-layered bubble sheet showed favorable performance for slab. Therefore, in this research, regarding the actually constructed wall-typed apartment building, the most efficient curing method was suggested based on the evaluation of curing performance depending on temperature distribution depending on various location of covered or exposed rebar. As a result, the D method was determined as the most efficient curing method without any concern of early-age frost damage. However, by considering easiness of construction, the B method of covering the pieced double-layered bubble sheet on gap between rebars can be another option of desired result.

The Preparation and Practical Deinking Property of Liquid Deinking Agent for Recycling of Waste Paper (폐지 재활용용 액상 탈묵제의 제조 및 현장적용 탈묵특성)

  • Chun, Yong-Jin;Soh, Soon-Young;Hong, Sang-Euy
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.6
    • /
    • pp.729-736
    • /
    • 2016
  • It is necessary to recycle and reuse waste paper for preservation of the global environment. Instead of a solid deinking agent, liquid deinking agents have been made using various fatty acids with EO/PO added for higher deinking effect. The removal efficiency of ink on waste paper was evaluated by the ERIC and brightness properties after processes of recycling pulping (sample composition ONP: OMG = 5:5, concentration 15%, temperature $45^{\circ}C$, pulping time 20 min.) and flotation (concentration 1%, temperature $45^{\circ}C$, air flow 7 L/min, time 8 min.). Also, the ink reattachment of paper was evaluated by hyperwashing. The results show that it is effective for mass-preparation to saponify oleic acid with KOH at $80^{\circ}C$ and to add EO/PO. This deinking agent was used in a paper plant, and we evaluated the brightness, color, and ERIC. The deinking agent showed excellent performance.

Technology trend of Smart-home Security System (스마트 홈 시큐리티 기술 동향)

  • Jang, Ye-Jin;Jeon, Yong-Tae
    • Korean Security Journal
    • /
    • no.30
    • /
    • pp.117-138
    • /
    • 2012
  • To cope with rapidly increasing crimes, the Smart-home system has become common to minimize and prevent crimes in the residential space. Accordingly, the interest on the security-related Smart-home system is also increasing. First is the establishment of Smart-home security standard. At present, the Smart-home security systems are implemented by individual policies of construction companies or by the requirement of residents. Each construction company has their own characteristics in the Smart-home security system; while there is no standardized system. Second is the introduction of Smart-home security certificate system. Like people have certificates, now the residential spaces may also need certificates. A certificate system that represents the performance of residential spaces cannot be an absolute criterion in the evaluation of apartment quality, however, it can be a basic requirement for the convenient residential environment and policies being implemented by the government. If a certificate system would be introduced, construction companies will compete with each other to provide with better security system and apartment operation companies will hire more specialized security personnel in order to get higher certificates. Consequently, better security of residential space will be secured. It is also required to develop and establish response measures by studying the key changes and trends of Smart-home security system. The advance in mechanical security devices will bring about more changes in the future. Therefore, more various in-depth studies are required on the basic specifications of security system in the residential spaces.

  • PDF

The Legal Study on the Demonstration-on-sea (해상시위의 기본권성과 집시법적용가능성 고찰)

  • Lee Kee-Chun
    • Journal of Navigation and Port Research
    • /
    • v.29 no.3 s.99
    • /
    • pp.235-244
    • /
    • 2005
  • A new type qf demonstrations in the temporal and spacial aspects, such as accidental and unprepared demonstration, urgent assembly, demonstration-on-sea, demonstration-on-highway, and etc., which are not intended in the Law of Assembly and Demonstration, are becoming a social problem Especially, the law on demonstration-on-sea needs to be discussed further because it is not clear if the Law of Assembly and Demonstration is applicable here. If so, how can it be explained logically? Or, if not so, which law should be applied to this context? So far, various theories on demonstration-on-sea have been opposed aggressively vs. submissively. However, it should be guaranteed that the demonstration on sea is one of the constitutional rights based on the self-decision right of demonstration's place. Accordingly, these contents have to be interpreted with a concept of demonstration in Demonstration's law in coordination with the Constitution. Therefore, it is not persuasive that Demonstration's law is analogized, or general police law is applied, to such untypical demonstrations. In addition, taking into consideration a demonstrative function for minority under modem situation of demonstration, it is right to apply the Law of Assembly and Demonstration to the demonstration-upon-sea directly.

Properties of Retard Type Stabilizing Agent for Reuse of Sludge Water of Ready Mixed Concrete (레미콘 회수수의 재활용을 위한 지연형 안정화제의 특성)

  • Lee Mun-Hwan;Lee Sea-Hyun;Park Young-Shin;Park Jae-Myung
    • Journal of the Korea Concrete Institute
    • /
    • v.17 no.1 s.85
    • /
    • pp.105-112
    • /
    • 2005
  • Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.

Evaluation of Drying Performances by Hydrothermal Reaction of Sewage Sludge and Food wastes (하수슬러지 및 음식물류폐기물의 수열반응에 의한 건조 효율 평가)

  • Shin, Myung-Seop;Lee, Hyung-Don;Jeon, Yong-Woo
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.25 no.1
    • /
    • pp.47-55
    • /
    • 2017
  • The technology for hydrothermal reaction of organic waste is one of the promising process to improve energy efficiency of biomass waste recycling system since moisture contents of treated biomass could be reduced at 40% or less than by dehydration processes. For these reasons, many parts of the world are interested in hydrothermal reaction of organic waste. In this paper, drying performances were evaluated with and without hydrothermal reaction of organic wastes which are sewage sludge and food wastes. For the hydrothermal reaction, organic wastes were treated at $200^{\circ}C$ for 1hr. Drying time of treated organic waste by hydrothermal reaction was reduced. In case of food waste drying at $100^{\circ}C$, drying time of treated wasted was reduced more 52.9% than non-treated. Hence, drying performances of sewage sludge and food wastes should be improved by hydrothermal reaction. Drying rates of treated wastes were considerably increased at preheat period of drying characteristic curve as followings; at $80^{\circ}C$ sludge as 148%, $100^{\circ}C$ sewage sludge as 151%, $80^{\circ}C$ food waste as 209%, $100^{\circ}C$ food waste as 366%. It means the surface area of treated wastes could be increased with destruction of cell membrane by hydrothermal reaction. However, the designer and operator of drying process should be careful, since enhanced drying rate cause the extension the decreasing drying period.

자성유체 윤활제의 개발 동향

  • 김영규;심우전;김청균
    • Tribology and Lubricants
    • /
    • v.12 no.1
    • /
    • pp.1-5
    • /
    • 1996
  • 자성유체는 자연에서 추출한 것이 아니라 자화성(Magnetizability)과 유도성(Flowability)을 동시에 갖도록 합성한 특수액체이다. 자성유체는 1960년대 중반에 미국의 NASA에서 처음 개발된 이후로 윤활, 밀봉, 감쇄, 의료 등의 분야에서 응용연구가 많이 진행되었기 때문에 고도의 정밀도를 요하는 항공, 우주산업, 컴퓨터와 반도체 분야 등에서 실용화가 크게 진전되고 있다. 특수물질일 자성유체는 전기적으로 도체인 10nm 정도의 미세한 자기입자(Magnetic particles)에 코팅을 한 후, 이것을 물, 탄화수소, 플루오르카본, 에스터 등의 매개유체(Carrier Fluids)에 혼합시켜서 콜로이드 상태로 사용하게 된다. 자성유체는 미세한 자기입자들이 매개유체내에서 서로 충돌하면서 반발력을 발생시켜서 상호간에 늘 콜로이드 상태를 유지하고 있으며, 이 특수유체가 자기장의 영향을 받게 되면 점도가 증가하면서 특이한 성질을 갖게 된다. 상대 접촉 운동면에 경계마찰이나 혼합마찰을 하게 되면 윤활상태는 비교적 나쁘다. 이러한 마찰지역에 콜로이드상의 자성유체 윤활제를 공급하면 기존의 윤활제에 비하여 대단히 효과적으로 윤활을 할 수 있게 된다. 그러나 자성유체 윤활제가 마찰부위에 원활하게 공급하기 위해서는 미끄럼 마찰부에서 자기장을 잘 형성시킬 수 있는 도체이어야 하기 때문에 특별한 윤활 시스템 설계가 제시되어야 한다. 자성유체 윤활제는 합성으로 제조된 특수물질로 여러가지 장점을 갖고는 있으나 기존 윤활유와의 적합성, 마찰열, 밀봉압력 등의 조건에서 제한적으로 사용될 수 밖에 없으므로 항공, 우주 산업이나 석유 화학분야와 같이 특수 환경에서만 사용되고, 또한 기존의 광유계 윤활제에 비하여 대단히 고가하는 문제점을 갖고 있다. 그러나 윤활 마찰면의 다양화와 가혹한 사용조건은 자성유체 윤활제의 연구개발 필요성을 크게 증대시키고 있다.xed Effects Model)을 결정하고, 각각에 해당하는 통계모형을 구축하였다. 이 결과 (1) 업종 및 기업규모별로 그룹간에 유의한 특성이 발견되었으며, (2) R&D 및 광고투자는 기업의 시장성과를 설명하는 중요한 변수이나, (3) R&D 투자의 경우는 광고에 비해 불확실성이 존재하는 것으로 나타났고, (4) 수리모형에서 도출된 한계원리가 통계모형에서도 유효한 것으로 드러났다.등을 토대로 한 10대 산업을 육성하기 위하여 과학기술부는 기술수요조사를 바탕으로 49개 주요기술을 도출하여, 과학기술 일류 국가 실현, 국민소득 2만불 달성이라는 국가적 슬로건을 내걸고 “차세대 성장동력” 창출을 위한 범정부차원의 기획과 연구비의 집중투자를 추진하고 있다.달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of control. In case

A study on Female user's in automobiles design -focusing on inter design of automobiles (자동차디자인에 있어서 여성유저에 관한연구 - 실내편의장치 디자인을 중심으로 -)

  • Park, Eok-Chul;Yoon, Myung-Han
    • Archives of design research
    • /
    • v.19 no.5 s.67
    • /
    • pp.363-372
    • /
    • 2006
  • The aim of this study is to shed light on the importance of female drivers, study their characteristics and needs, and create automobile designs in accordance with the study. The power of female consumers is greatly increasing in a modern society, To the extent that women became the core consumers. Companies are now turning their attention to female consumers in order to survive the fierce competition in the saturated markets. Moreover, it is becoming imperative for companies to actively develop products and services in female perspectives to meet the diversified needs of consumers. It is forecasted that vigorous research, analysis and understanding of the unique culture of women will be increasingly important now that women are emerging as core consumers. Only the companies that makes such efforts consistently can dominate the market. The automobile industry is not an exception. The world's major automobile companies including Volvo and Ford Motor Co. are keenly focusing on automobile exterior and interior designs for women. Korean companies are also designing cars that cater to women, starting with Lanos and Juliet of Daewoo Motors in 1998, yet specific and systematic research on the subject has not been made. This study aims to emphasize the power of female users, make a research and analysis on their needs and characteristics, and suggest car interior designs that cater to them.

  • PDF

Optimal Operation Algorithm of Protection Devices in Distribution Systems With PV System (대용량 태양광전원이 연계된 배전선로에 있어서 보호협조기기의 최적 운용알고리즘)

  • Kwon, Soon-hwan;Lee, Hu-dong;Nam, Yang-hyun;Rho, Dae-seok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.5
    • /
    • pp.17-26
    • /
    • 2018
  • If a photovoltaic (PV) system is installed in a primary feeder interconnected with the PV system, bi-directional power flow can occur, and then, the magnitude and direction of the fault current can change, depending on the fault location and point of common coupling (PCC) of the PV system, and the time current curve (TCC) cannot be properly coordinated between protection devices. Also, it is difficult to obtain a proper time interval for protection devices because the conventional setting approach is applied, even though the PV system is installed and operating. Therefore, this paper presents three operation modes considering the operational conditions of the PV system to obtain setting values for protection devices. Based on the mode, this paper proposes an algorithm to calculate the optimal protection coordination time interval according to the introduction capacity of the PV system. In addition, this paper performs modelling of a distribution system with the PV system and protection devices by using Off-DAS S/W, and analyzes the characteristics of the time interval between the protection devices, such as substation relays, reclosers, customer relays, and PV customer relays. The simulation results confirmed that the proposed operational modes and setting-value algorithms are useful and effective for protection coordination in a distribution system for a PV system.