• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.321-332
• /
• 2017

In order to build a general model of a high-throughput uranium electrorefining process according to the electrode configuration, numerical analysis was conducted using the COMSOL Multiphysics V5.3 electrodeposition module with Ordinary Differential Equation (ODE) interfaces. The generated model was validated by comparing a current density-potential curve according to the distance between the anode and cathode and the electrode array, using a lab-scale (1kg U/day) multi-electrode electrorefiner made by the Korea Atomic Energy Research Institute (KAERI). The operating temperature was $500^{\circ}C$ and LiCl-KCl eutectic with 3.5wt% $UCl_3$ was used for molten salt. The efficiency of the uranium electrorefining apparatus was improved by lowering the cell potential as the distance between the electrodes decreased and the anode/cathode area ratio increased. This approach will be useful for constructing database for safety design of high throughput spent nuclear fuel electrorefiners.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.381-385
• /
• 2007

High density activated carbons electrode materials, for supercapacitor were prepared by chemical KOH activation of cokes as the starting material under Ar atmosphere. By controlling the synthesis conditions and reducing KOH quantity in the activation step, the specific surface area of the product was decreased. BET surface area was measured to be $500{\sim}1260m^2/g$, and the electrode density was in the range of $0.68{\sim}0.83g/cm^3$. Volumetric specific capacitance (unit cell test) was as high as 20 F/cc, which corresponds to gravimetric specific capacitance of about 95 F/cc on the basis of half cell test. It should be noted that the specific capacitance of the activated carbons prepared in this study is superior to that of commercial activated carbons.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.405-410
• /
• 2011

High-performance of an electric double layer capacitance (EDLC) electrode was prepared by the amino-fluorination of activated carbon by using $NF_3$ gas. The pore structure and surface chemistry were investigated based on the specific capacitance of EDLC. The amino-fluorination of activated carbon introduced functional groups of nitrogen and fluorine which are beneficial for the specific capacitance of EDLC without the change of pore structures. The E-NF100AC electrode, which has nitrogen and fluorine functional groups less than 1 at%, showed the highly improved specific capacitance of 528 (${\pm}9$) F/g at 2 mV/s showing 122% improved value when comparing with that of non-functionalized E-RAC electrodes. Whereas, the E-NF200AC electrode, which has nitrogen and fluorine functional groups over 1 at%, showed the decreased specific capacitance because of perfluorinated introduction. So, it is concluded that the proper contents of nitrogen and fluorine groups improved the specific capacitance of EDLC.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.432-432
• /
• 2013

현대에 이르러 직접방식 엑스선 검출기에서는 기존의 a-Se을 주로 이용하였지만, 고전압 인가에 따른 회로 손상과 짧은 수명, 그리고 누설전류에 따른 안전의 문제 등으로 낮은 에너지 밴드갭과 높은 흡수효율, 비저항 등에 의거한 다양한 대체 물질에 대한 연구가 활발하게 이루어져가고 있다. 본 논문에서는 직접방식 엑스선 검출물질로 전기이동도와 흡수효율이 뛰어나고, 밴드갭이 낮아 태양전지분야 뿐만 아니라 최근 엑스선 검출물질로 각광받고 있는 CdTe를 선정하였다. 연구의 목적은 PVD (Physical Vapor Deposition)방식의 CdTe 검출 물질의 제작과정에서 CdTe가 기화되어 하부전극 기판에 증착될 시, 하부전극 기판 온도에 따른 CdTe의 박막형성과 전기적 측정을 실시하여 그에 따른 최적의 증착조건을 선정하는 것이다. 하부전극 기판으로는 Au/glass를 사용하였으며 증착 시, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$로 나누어 특성을 평가하였다. 시료는 파우더형태의 다결정CdTe를 120 g를 사용하여 증착완료 시, 약 $100{\mu}m$의 박막두께를 구현하였다. PVD증착의 조건으로는 Mo재질의 보트를 사용하였으며, 증착 시 진공도는 $5{\times}10^{-6}$ Torr, 보트온도는 약 $350^{\circ}C$ 소요시간은 5시간이었다. 증착이 완료된 CdTe의 표면구조와 전기적 특성평가를 위해 SEM촬영을 실시하였고, 전기적 특성 평가를 위해 CdTe표면에 Au를 PVD방식으로 증착하였다. 실험 결과 SEM촬영을 이용한 표면특성에서는 하부전극 기판의 온도가 높아질수록 표면 결정입자가 증가하는 것을 확인할 수 있었으며, 전기적 특성에서도 하부전극 기판의 온도가 증가할수록 RQA-5 조건의 70 kVp, 100 mA, 0.03 sec 엑스선에 대한 우수한 민감도와 암전류 값을 확인하였다. 이러한 결과는 증착과정에서 온도에 따른 다결정 CdTe의 표면결정 크기 증가는 동일한 면적에서 표면결정 수의 감소를 뜻한다. 이는 결정간의 경계에서 트랩 되어지는 전자가 감소하고, 전자의 이동도 또한 높은 효율을 나타냄을 확인할 수 있었다. 따라서 본 연구를 통하여 CdTe기반의 직접방식 엑스선 검출기 제작과정에서 증착 시 하부전극기판 온도가 증가할수록 결정의 크기가 증가하여 최적의 전기적 특성을 나타냄을 검증할 수 있었다.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.46-51
• /
• 2003

In this work, the electrode far fuel cell was fabricated by mixing carbon blacks with activated carbon fibers (ACFs) in order to form the proper three phase distribution, and then the change of electrode in three phase distribution was investigated. Pt loading yield with ACF content and Pt particle size were determined by AAS and XRD measurements, respectively. And the pore structures, including specific surface area ($S_{BET}$), microporosity, and pore size distribution (PSD) for each electrode were systematically investigated by BET volumetric measurement. The morphology of electrode in three phase distribution was determined by SEM. As an experimental result, it was observed that Pt loading yield was not influenced on the content of ACF. While, the electrode in three phase distribution was largely improved in the case of 30% ACF addition on carbon blacks. These results were probably explained by the increase of the portion of micropores, resulting in increasing the active sites of catalyst.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.63-70
• /
• 1999

A PLT(10) thin film has been deposited on $Pt/TiO_2/SiO_2/Si$ substrate by sol-gel method, and its switching characteristics have been investigated with various top electrode areas, input pulse voltages and loan resistances. As the external input pulse voltage increases from 2V to 5V, the switching time decreases from $0.49{\mu}s$ to $0.12{\mu}s$. The activation energy ($E_a$) obtained from the relations between the switching time and the applied pulse voltage is evaluated as 209kV/cm. The switched charge densities at 5V obtained from the hysteresis loop and the polarization switching are $11.69{\mu}C/cm^2$ and $13.02{\mu}C/cm^2$, respectively, which agree relatively well with each other and show the difference of 10%. When the top electrode area increases from TEX>$3.14{\times}10^{-4}cm^2$ to $5.03{\times}10^{-3}cm^2$ and the load resistance increases from 50${\Omega}$ to 3.3$k{\Omega}$, the switching time increases from $0.12{\mu}s$ to $1.88{\mu}s$ and from $0.12{\mu}s$ to $9.7{\mu}s$, respectively. These switching characteristics indicate that PLT(10) thin film can be well applied in nonvolatile memory devices.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.35-41
• /
• 2004

In computational study on RF(Radio Frequency) plasmas, a 1D fluid models with an advantage of a short computational time are often adopted. However, in order to obtain realistic calculation results under a typical chamber geometry with unequal-sized electrodes, modeling of the plasma space is an issue to be investigated. In this paper, it is focused on that how much a 1D model can approximate a 2D model. 1D fluid models with unequal-sized electrodes, which have spherical and frustum geometry systems, were developed and their results were compared with those of 2D model with Gaseous Electronic Conference cell structure. Behavior of $N_2$ RF plasmas has been simulated using 1D and 2D fluid models and a technique to take account of unequal-sized electrodes in a 1D fluid models has been examined. Features of the plasma density and the electric potential were discussed as characteristic quantities representing the asymmetry of the chamber geometry.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2059-2060
• /
• 2006

본 논문에서는 PVA 모드의 측면 시인성이 왜곡되는 현상을 설명하고, 그 대안으로 나온 S-PVA 모드에서의 측면 시인성 왜곡 현상을 연구하였다. 현재 많이 쓰이는 측면 시인성 왜곡 현상의 정량화에 대한 이론과 S-PVA 모드에 관한 이론을 설명하였다. 제시된 이론에 근거를 두고 2개의 부전극을 가진 픽셀구조에서 전극의 면적비를 다르게 설계하여 시뮬레이션을 하였고, 실제로 제품을 제작해서 시뮬레이션 결과와 부합됨을 확인하였다.

• Polymer Science and Technology
• /
• v.21 no.2
• /
• pp.149-156
• /
• 2010

전기방사 탄소섬유와 s-VGCFs는 그 미세구조의 특성 때문에 응용분야가 서로 다르다. 전기방사 탄소나노섬유는 유기물을 섬유화하고 그것을 탄화하기 때문에 VGCFs에 비해서 낮은 가격에 대량생산이 가능하고 촉매를 사용하지 않기 때문에 전극으로 사용할 경우 금속불순물에 대한 부반응의 우려가 없다. 한편, 결정성이 낮고 세공이 잘 발달되어 비표면적이 크기 때문에 이온을 흡착해서 에너지를 저장하는 전기화학 캐패시터나 가스 흡착 분리나 촉매의 지지체로 사용하는데 장점이 있다. 이에 비해서 s-VFCFs는 섬유의 직경이 기존의 VGCF에 비해서 작으면서 잘 발달된 흑연구조가 동심원 구조를 하고 있어 굴곡강도가 크고 열 및 전기전도도가 우수하여 납축전지나 Li 이온전지의 충전제로 사용하여 역학적 특성과 향상시켜 주는 역할을 한다. 또한, 금속과 복합화하여 가벼우면서도 강도를 증가시켜주는 보강재로 사용가능하다.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.409-416
• /
• 2021

Dimensionally stable electrodes are one of the important components in electrochemical water treatment processes. In the manufacturing of the dimensionally stable electrodes, the type of metal catalyst coated on the surface of the metal substrate, the coating and sintering methods substantially influence their performance and durability. In this study, using Ir-Ru-Ta ternary metal coating, various electrodes were prepared depending on the coating method under the same pre-treatment and sintering conditions, and its performance and durability were studied. As a coating method, brush and spray coating were used. As a result, the reduction in the amount of catalyst ink was achieved because more amount of metal could be coated for the electrode using spraying with the same amount of catalyst ink. In addition, the spray_2.0_3.0 electrode prepared by a specific spray coating method shows the phenomenon of cracking and the uniform coating of the ternary metal on the surface of the coating layer, and results in a high electrochemically active specific surface area, and the decomposition performance of 4-chlorophenol was superior to the other electrodes. However, it was found that there was no significant difference in durability depending on the coating method.