• Journal of the Korean Electrochemical Society
• /
• v.13 no.1
• /
• pp.19-33
• /
• 2010

The surface film, which is formed on graphite negative electrodes during the initial charging, is a key component in lithium secondary batteries. The battery reactions are strongly affected by the nature of the surface film. It is thus very important to understand the physicochemical properties of the surface film. On the other hand, the surface film formation is a very complicated interfacial phenomenon occurring at the graphite/electrolyte interface. In studies on electrode surfaces in lithium secondary batteries, in-situ experimental techniques are very important because the surface film is highly reactive and unstable in the air. In this respect electrochemical atomic force microscopy (ECAFM) is a useful tool for direct visualizing electrode/solution interfaces at which various electrochemical reactions occur under potential control. In the present review, mechanism of surface film formation and its correlation with electrolyte are summarized on the basis of in-situ ECAFM studies for understanding of the nature of the surface film on graphite negative electrodes.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.74-78
• /
• 2003

Multi-channel images of 11-MUA and 11-MUOH self-assembled monolayers were obtained by using two-dimensional surface plasmon resonance (SPR) absorption. Patterning process was simplified by exploiting direct photo-oxidation of thiol bonding (photolysis) instead of conventional photolithography. Sharper images were resolved by using a white light source in combination with a narrow bandpass filter in the visible region, minimizing the diffraction patterns on the images. The line profile calibration of the image contrast caused by different resonance conditions at each points on the sensor surface (at a fixed incident angle) enables us to discriminate the monolayer thickness in sub-nanometer scale. Furthermore, there is no signal degradation such as photo bleaching or quenching which are common in the detection methods based on the fluorescence.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.6
• /
• pp.347-351
• /
• 2001

Panax ginseng C.A. Meyer is a well-known Korean traditional medicine. Until now, even though major research of ginseng has been focused on the pharmacological effect, clinical application and chemical analysis of extracted secondary metabolite for several years, the physiology and gene functions of ginseng were not well known. In this research, we have developed the protein extraction methods of ginseng root and hairy root for proteome analysis in order to elucidate the gene(s) function of ginseng. Using the liquid nitrogen (equation omitted) TCA method as protein extraction method, about 660 protein spots were detected on the 2-DE gel of hairy root. Additionally, comparative analysis result of 2-DEs of ginseng root (equation omitted) hairy root suggested that proteomes of same organism could be changeable according to the culture condition, growth stages and other stimulus.

• Journal of Educational Research in Mathematics
• /
• v.27 no.1
• /
• pp.51-67
• /
• 2017

Analogical reasoning is a mathematically useful way of thinking. By analogy reasoning, students can improve problem solving, inductive reasoning, heuristic methods and creativity. The purpose of this study is to analyze the analogical reasoning of preservice mathematics teachers while constructing quadratic curves defined by eccentricity. To do this, we produced tasks and 28 preservice mathematics teachers solved. The result findings are as follows. First, students could not solve a target problem because of the absence of the mathematical knowledge of the base problem. Second, although student could solve a base problem, students could not solve a target problem because of the absence of the mathematical knowledge of the target problem which corresponded the mathematical knowledge of the base problem. Third, the various solutions of the base problem helped the students solve the target problem. Fourth, students used an algebraic method to construct a quadratic curve. Fifth, the analysis method and potential similarity helped the students solve the target problem.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2242-2250
• /
• 2009

Recently, with the advance of Ubiquitous era, the types of services become diverse. Especially, due to the rapid development of mobile technology, the new functions of mobile phones are added and the new applications of mobile phones are developed actively. Among the various applications related to mobile phones, 2 dimensional barcode-based applications are increasing. 2 dimensional barcode is mostly used for the management of past record. However, by combing 2 dimensional barcode with mobile phones, the application areas of 2 dimensional barcode are expanded to the means of publicity for education, tourism, and festivals. In this paper, we develop a QR code decoder running on smartphones, which connects on-line and off-line. In addition, we modify our decoder by detecting the point for performance enhancement based on TRIZ. We compare our decoder with an open-source based decoder in terms of the code size of decoding and the speed of decoding in order to prove that our decoder has a better performance than the other. Finally, we introduce two applications: u-map and u-pamphlet as QR code applications.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.4-15
• /
• 2013

The study of corrosion products generated by archaeological bronzes that have been buried for a long time can provide certain evidence that enables us to understand the natural corrosion process of bronze and helps us develop conservation and preservation methods. In the present study, the specimens taken from two bronze mirrors and three bronze swords were used to study the corrosion morphology and the related phenomena such as selective corrosion of ${\alpha}$ or ${\alpha}+{\delta}$ phases, decuprification, destannification, and secondary copper. Furthermore, corrosion development was discussed based on the ions distributed throughout the corrosion layers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.61-67
• /
• 2022

A metal salt solution was prepared from valuable metals (Ni, Co, Mn) recovered from a scrap of waste lithium secondary batteries, and an NCM811 precursor was synthesized from the solution. The effect on precursor formation according to reaction time was confirmed by SEM, PSA, and ICP analysis. Based on the analysis results, the electrochemical properties of the synthesized NCM811 precursor and the commercial NCM811 precursor were investigated. The Galvano charge-discharge cycle, rate performance, and Cycle performance were compared, and as a result, there was no significant difference from commercial precursors.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.2
• /
• pp.165-172
• /
• 2006

Purpose: The purpose of this study is to evaluate the effects of intratunnel fixation in the tibial side on the arthroscopic ACL reconstruction with quadruple hamstring tendon at the second look arthroscopy. Materials and Method: From Dec 1999 to May 2005, we arthroscopically reexamined 32 cases who had been done arthroscopic ACL reconstruction with quadruple hamstring tendons. Hamstring tendons of all cases were fixed at femoral side with RigidfixTM. At the tibial side hamstring tendons were fixed only Post-tie (Group I) or Post-tie combined with IntrafixTM (Group II). At the time of second look arthroscopy mean age of cases was 30 years and mean duration for second look arthroscopy was 21.3 months. We analyzed the results with IKDC score, KT-1000 arthrometer under anesthesia, Telos stress radiography, tibial tunnel widening on the radiography and second look arthroscopic findings. Results: Group II had more superior than group I at side to side differences with KT-1000 and Telos stress radiograph, IKDC score, but the differences were insignificant. At arthroscopic evaluation, Group ll also had more superior than group I at graft tension and graft appearance, graft synovialization, but the differences were insignificant. Tibial tunnel widening in the knee AP radiograph was 2.3 mm in Group I and 1.7 mm in Group II and the difference was significant. (P=0.042) Conclusions: Additional procedure of tibial intratunnel fixation in arthroscopic ACL reconstruction with autogenous hamstring tendon significantly prohibited from tibial tunnel widening but clinical results, radiologic joint stability, findings in second look arthroscopy were insignificantly different. We concluded that Post-tie itself induced satisfactory clinical results, joint stability and graft maturation and that tibial tunnel widening did not affect the results.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2009

Arsenic and heavy metals leached out as a result of oxidation of tailings exposed to the surface pose a serious environmental contamination of mine areas. This study investigated how arsenic behavior is controlled by a variety of processes, such as oxidation of sulfides and formation or alteration of secondary minerals, based on mineralogical methods. The study was carried out using the tailing samples obtained from Nakdong mine located in Jeongseongun, Gangwondo. After separating magnetic and non-magnetic minerals using pretreated tailing samples, each mineral sample was classified according to their colors and metallic lusters observed by the stereoscopic microscope. Subsequently, the mineralogical properties were determined using various instrumental analyses, such as x-ray diffractometer (XRD), energy dispersive spectroscopy (EDS), and electron probe micro analyzer (EPMA). The literature review confirmed that various ore minerals were identified in the Nakdong ore deposits. In this study, however, there were observed a few original ore minerals as well as secondary and/or tertiary minerals newly formed as a result of weathering including oxidation. In particular, we did not recognize pyrrhotite which has been known to originally exist in a large abundance, but peculiarly colloform-type iron (oxy)hydroxides were identified, which indicates most of pyrrhotite has been altered by rapid weathering due to its large reactivity. In addition, a secondary scorodites filling the fissure of weathered primary arsenopyrites were identified, and it is speculated that arsenic is immobilized through such a alteration reaction. Also, we observed tertiary iron (oxy)hydroxides were formed as a result of re-alteration of secondary jarosites, and it suggests that the environment of tailing has been changed to high pH from low pH condition which was initiated and developed by oxidation reactions of diverse primary ore minerals. The environmental change is mainly attributed to interactions between secondary minerals and parental rocks around the mine. As a result, not only was the stability of secondary minerals declined, but tertiary minerals were newly formed. As such a process goes through, arsenic which was immobilized is likely to re-dissolve and disperse into surrounding environments.

• The Korean Journal of Applied Statistics
• /
• v.5 no.1
• /
• pp.103-111
• /
• 1992

The projection pursuit method has been gussested as a technique for the analysis of the multivariate data. This method seeks out interesting linear projections of the multivariate data onto a line of a plane to solve the curse or dimensionality. In this paper we developed the discriminant analysis by using the projection method and simulations were used for comparison between this and other existing discriminant analysis methods.