• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.449-470
• /
• 2018

A review of research trends on wood surface protection for exterior use obtained the following conclusions: It has been reported that inorganic compounds such as chrome and copper used as wood preservatives can protect wood from weathering. It has been shown that precoating with hydrophobic substances such as wax and oil, UV absorbers, and HALS (Hindered Amine Light Stabilizers) enhances weathering resistance on the surface of ACQ-treated wood. Opaque coatings of paint/stains and semitransparent stains on the surface of preservative treated wood can increase the synergistic effects on prevention of weathering deterioration. Also the need for repainting periodically for the protection of the preservative treated wood surface has also been suggested. ZnO or $TiO_2$ of fine particles, metal ions such as Co, Cr, Fe, Mn, Ni and Ti, and UV absorbers such as tris-resorcinol triazine derivatives, triazine and benzotriazole were introduced as additives for preventing UV in the transparent coating on wood. Several reports showed that chemical modification such as methylation, acetylation, or alkylations have made some increases the effects of preventing weathering with the increasing weight gain of chemical formulas. In heat-treated wood, there were various contradictory reports on the resistance of weathering, and there were some other reports emphasizing the necessity of painting with UV resistance, which leads to the necessity of more advanced studies.

• Journal of Food Hygiene and Safety
• /
• v.17 no.1
• /
• pp.20-25
• /
• 2002

This study was aimed to determine the urinary metabolite of profenofos, one of the organophos-phorus pesticides, as the biomarkers of exposure. Urine samples were collected fort 24 hours in metabolic cages after oral administration and dermal application of profenofos to rats. Identification of the derivatized urinary metabolite was determined by GC/MS and excretion time courses of the urinary metabolite was analyzed by GC/MS. Urinary metabolite of profenofos, 4-bromo-2-chlorophenol, was detected in rats urine both after oral administration and dermal application of profenofos. Parent compound was not detected in the experiment. In GC/MS, the mass spectral confirmation for 4-bromo-2-chlorophenol ion was identified at m/z 208.4-bromo-2-chlorophenol was excreted within 48 hours and 72 hours after oral administration and dermal application of profenofos, respectively. In this study, the same urinary metabolite of profenofos was detected both in oral and dermal exposure. Generally, excretion of the urinary metabolite after oral administration was detected faster than after dermal application. It is suggested that urinary 4-bromo-2-chlorophenol could be used as the biomarkers of exposure to profenofos.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.15-20
• /
• 2011

[ $^7Li$ ]Magic Angle Spinning (MAS) NMR spectroscopy has been used to study the lithium local environments in $Li_4P_2O_7$ and$LiFePO_4$ materials. The purpose of this study was to know the structure of the solid electrolyte interphase (SEI) in lithium ion cells composed of $LiFePO_4$ as cathode material. $Li_4P_2O_7$ and $LiFePO_4$ were prepared by a solid-state reaction. The $^7Li$ MAS NMR experiments were carried out at variable temperatures in order to observe the local structure changes at the temperatures in $Li_4P_2O_7$ system. The $^7Li$ MAS NMR spectra of in $Li_4P_2O_7$ indicate that the lithium local environments in $Li_4P_2O_7$ were not changed in the temperature range between $27^{\circ}C$ and $97^{\circ}C$ Through this work, we confirmed that the small amount of $Li_4P_2O_7$ less than 5.0 wt% in $LiFePO_4$ could be clearly measured by the $^7Li$ MAS NMR spectroscopy at high spinning rate over than 11 kHz.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.282-288
• /
• 2017

In this paper, GaAs/AlGaAs multi-layer structure was grown by liquid phase epitaxy with graphite sliding boat, which can be used as a device structure of a photocathode image sensor. The multi-layer structure was grown on an n-type GaAs substrate in the sequence as follows: GaAs buffer layer, Zn-doped p-type AlGaAs layer as etching stop layer, Zn-doped p-type GaAs layer, and Zn-doped p-type AlGaAs layer. The Characteristics of GaAs/AlGaAs structures were analyzed by using scanning electron microscope (SEM), secondary ion mass spectrometer (SIMS) and hall measurement. The SEM images shows that the p-AlGaAs/p-GaAs/p-AlGaAs multi-layer structure was grown with a mirror-like surface on a whole ($1.25mm{\times}25mm$) substrate. The Al composition in the AlGaAs layer was approximately 80 %. Also, it was confirmed that the free carrier concentration in the p-GaAs layer can be adjusted to the range of $8{\times}10^{18}/cm^2$ by hall measurement. In the result, it is expected that the p-AlGaAs/p-GaAs/p-AlGaAs multi-layer structure grown by the LPE can be used as a device structure of a photoelectric cathode image sensor.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.31-39
• /
• 2015

The synergistic solvent extraction of rare earth elements such as europium and yttrium has been investigated by the extractant with crown ether as an additive. Macrocyclic ligand as host-guest compounds form more stable complexes with metal ions which have the similar size of the cavity of crown ether. In our previous study[14] founded that the extraction used fatty acid of the various alkyl chain length. Based on the results of the previous experiment, the synergistic separation effect of two metals investigated that the hexanoic acid had was the worst extraction effect which added a crown ether such as 18-crown-6 ether, 15-crown-5 ether, and 12-crown-4 ether. In this study, the concentrations of hexanoic acid have showed the separation effect, and then the concentrations and kind of crown ether are performed for synergistic extraction at the hexanoic acid concentration of the highest separation effect. As a results, the separation rate is the highest value of 1.72 at 0.05 M hexanoic acid, and 0.002M 15-crown-5 ether is the best value in other concentrations and kind of crown ether, it is about twice of using only hexanoic acid. Moreover, the extraction species of two metals has been founded $MLR_3{\cdot}3RH$ form when added the crown ether.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.163-163
• /
• 2010

중적외선 영역 ($3{\sim}5\;{\mu}m$)은 공기 중에 존재하는 이산화탄소나 수증기에 의해 흡수가 일어나지 않기 때문에 군사적으로 중요한 파장 영역이며, 야간에 적을 탐지하는데 응용되고 있다. InSb는 77 K에서 중적외선 파장 흡수에 적합한 밴드갭 에너지 (0.228 eV)를 갖고 있으며, 다른 화합물 반도체와 달리 전하 수송자 이동도 (전자: $10^6\;cm^2/Vs$, 정공: $10^4\;cm^2/Vs$)가 매우 빠르기 때문에 적외선 화상 감지기 재료로 매우 적합하다. 또한 현재 중적외선 영역대에서 널리 사용되는 HgCdTe (MCT)와 대등한 소자 성능을 나타냄과 동시에 낮은 기판 가격, 소자의 제작 용이성 때문에 MCT를 대체할 물질로 주목 받고 있다. 하지만, 기판과 절연막의 계면에 존재하는 결함 때문에 에너지 밴드갭 내에 에너지 준위를 형성하여 높은 누설 전류 특성을 보인다. 따라서 InSb 적외선 소자의 구현을 위하여 고품질의 절연막의 연구가 필수적이라고 할 수 있겠다. 절연막의 특성을 알아보기 위해, n형 InSb 기판에 플라즈마 화학 기상 증착법 (PECVD)을 이용하여 $SiO_2$, $Si_3N_4$를 증착하였으며, 증착 온도를 $120^{\circ}C$에서 $240^{\circ}C$까지 $40^{\circ}C$ 간격으로 변화하여 증착온도가 미치는 영향에 대하여 알아보았다. 절연막과 기판의 계면 특성을 분석하기 위하여 77 K에서 커패시턴스-전압 (C-V) 분석을 하였으며, 계면 트랩 밀도는 Terman method를 이용하여 계산하였다 [1]. $Si_3N_4$를 증착하였을 경우, $120{\sim}240^{\circ}C$의 증착 온도에서 $2.4{\sim}4.9{\times}10^{12}\;cm^{-2}eV^{-1}$의 계면 트랩 밀도를 가졌으며, 증착 온도가 증가할수록 계면 트랩 밀도가 증가하는 경향을 보였다. 또한 모든 증착 온도에서 flat band voltage가 음의 전압으로 이동하였다. $SiO_2$의 경우 $120{\sim}200^{\circ}C$의 증착온도에서 $7.1{\sim}7.3{\times}10^{11}\;cm^{-2}eV^{-1}$의 계면 트랩 밀도 값을 보였으나, $240^{\circ}C$ 이상에서 계면 트랩밀도가 $12{\times}10^{11}\;cm^{-2}eV^{-1}$로 크게 증가하였다. $SiO_2$ 절연막을 사용함으로써, $Si_3N_4$ 대비 약 25% 정도 낮은 계면 트랩 밀도를 얻을 수 있었으며, 모든 증착 온도에서 양의 전압으로 flat band voltage가 이동하였다. 두 절연막에 대한 계면 트랩의 원인을 분석하기 위하여 XPS 측정을 진행하였으며, 깊이에 따른 조성 분석을 하였다. 본 실험에서 최적화된 $SiO_2$ 절연막을 이용하여 InSb 소자의 pn 접합 연구를 진행하였다. Be+ 이온 주입을 진행하고, 급속열처리(RTA) 공정을 통하여 p층을 형성하였다. -0.1 V에서 16 nA의 누설 전류 값을 보였으며, $2.6{\times}10^3\;{\Omega}\;cm^2$의 RoA (zero bias resistance area)를 얻을 수 있었다.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.466-474
• /
• 2002

The analytical method of 14 kinds of coplanar - PCBs was established and applied the soil sample. The three kinds of extraction solvents (toluene, acetone: n-hexane, dichloromethane) were selected to apply the soil sample. The silica gel, florisil and alumina column cleanup also performed to compare the elution recovery. The average recovery of selected solvents in soil A, B and C was surveyed the 84.25%, 56.09% and 44.69% for toluene, 52.56%, 81.42% and 58.53% for acetone : n - hexane and 55.94%, 71.33% and 61.05% for dichloromethane. The average recovery is represented 49.99% for silica gel (n - hexane 100 mL), 69.65% for florisil (6% ether/n - hexane 100 mL), and 65.23% for alumina (2% DCM : n - hexane 100 mL, 50% DCM: n-hexane 150 mL). In silica gel (n - hexane) and florisil (6% ether : n - hexane) cleanup, the 14 kinds of coplanar PCBs eluted until 40 mL. In the silica gel and florisil columns cleanup, the amounts of elution solvent can be reduced from these results, but the researcher has to confirm the elution amounts before performing the experiments. In alumina cleanup process, the result was obtained to the 100 mL of elution solvents (2% DCM: n-hexane 100 mL and 50% DCM: n-hexane 40 mL), therefore the change of elution solvent is necessary to develop the simple procedure.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.357-363
• /
• 2014

Isoprene is a one of the biogenic volatile organic compounds (BVOCs) and it is known as a source of the tropospheric ozone and formaldehyde. In addition, isoprene is a trace component of the exhaled breath and it is a potential biomarker for the diagnosis of diseases such as lung cancer. In these regards, isoprene gas standards are required for the accurate measurement of isoprene in air samples. To establish a standard for isoprene gas, gravimetric preparation and characterization of primary gas standards were studied. The primary gas standards were produced independently in 4 aluminum cylinders and concentrations were examined by GC-FID. As a result, the uncertainty of the gravimetric preparations including purity of the raw material was 0.01% and reproducibility of the preparation of independent 4 cylinders was 0.08%. The primary gas standards for isoprene showed 14 months of long-term stability. The relative expended uncertainty of 2.8% (95% of confidence level, k=1.96) was assigned to the certified value of 10 ${\mu}mol$/mol level of isoprene based on the quantitative evaluation of the purity, weighing, reproducibility, adsorption and long-term stability.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.336-342
• /
• 1999

Various surface treatment techniques can be applied onto the surface of carbon fibers to increase interlaminar shear strength (ILSS). In a commerciaI treatment, first, surface of carbon fiber was oxidized, after that, a sizing agent was coated to improve handleability and adhesion to the matrix. Carbon fiber reinforced composites (CFRC) which is made of these fibers show excellent ILSS but show low vaIues of impact strength In this study, reactive and ductile interphase was introduced between fiber and matrix to increase both the ILSS and impact strength. By using electric conductivity of carbon fibers, flexible polymers which have ionizable group, i.e., MVEMA and EMA, were coated onto the surface (oxidized) of carbon fiber by the technique of electrodeposition. ILSS and impact strength of composites were evaluated according to the surface treatments, i.e., commercial sizing treatment, interphase introduction, and without sizing treatment. Izod impact strength and ILSS of CFRC were simultaneously improved in thc thickness range of $0.08{\sim}0.12{\mu}m$ of MVEMA interphase. Water resistance of the composites was decreased by introducing MVEMA interphase.

• Applied Biological Chemistry
• /
• v.42 no.2
• /
• pp.99-104
• /
• 1999

Soil actinomycetes of 703 strains were isolated from 25 sampling points in Cheju Island using 4 different media. Arginine glycerol salts agar containing soil extract was found to be the best medium for the isolation of soil actinomycetes. Soil samples from pasture land showed higher population and diversity of the actinomycetes than those from citrus field, forest, island, hill or valley. When the antibacterial activity of the 526 isolates was tested against three bacterial strains, Escherichia coli, Staphylococcus aureus and Pseudomonas solanacearum the frequency of the isolates with antibacterial activity varied much depending upon the media used for isolation and cultivation. BL106Ba, one of the 10 isolates that showed antibacterial activity against all the above 3 test strains, was chosen based upon the pH and heat stability of its antibacterial metabolites, and was identified as Streptomyces sp. based upon its cultural, morphological and physiological characteristics. The partially purified white crystalline substance obtained from the culture supematant of BL1063a through cation exchange chromatography(AG MP-50) and three times consecutive gel filtration(Sephadex G-10) showed high antimicrobial activity against gram positive and negative bacteria, but low activity against yeasts. The partially purified substance was found to contain at least four different compounds with antibacterial activity by both thin layer chromatography and high performance liquid chromatography.