• Membrane Journal
• /
• v.16 no.3
• /
• pp.196-203
• /
• 2006

A flue gas emission known to cause an acid rain, containing sulfur dioxide, is tightly controlled by a regulation. The membrane contactor could be one of the alternatives which might be useful technologies for better performance of desulfurization. The fundamental sulfur dioxide separation data were obtained by a flat membrane contactor so that they could be utilized for the full scale membrane contactor. The separation of sulfur dioxide was measured in terms of the concentration of NaOH absorbent, the concentration of sulfur dioxide, the feed flow rate and different membrane materials. As the concentration of absorbent increased, the removal efficiency increased. By increasing the concentration of sulfur dioxide, the removal efficiency decreased. As the feed flow rate increased, it was observed that the removal efficiency decreased. Finally, the effect of the membrane material on separation was found to be negligible.

• Journal of Korea Society of Industrial Information Systems
• /
• v.3 no.1
• /
• pp.101-116
• /
• 1998

혼합·이산 비선형 최적화문제 해결을 위한 전역적 최적화 알고리즘이 개발되었으며 이 알고리즘은 확률적 최적화기법인 유전알고리즘을 사용한다. 유전알고리즘은 다양한 설계변수를 처리하는데 적합하다. 그러나 기존의 유전알고리즘이 특별히 잘 수행되지 않는 상황이 많이 존재하기 때문에 혼합화에 대한 다앙한 방법이 개발되어지고 있다. 따라서 이 논문은 유전알고리즘에서 최적해 주위에 대한 국고수수렴기법과 정밀 탐색법을 구체화시킨 새로운 혼합유전알고리즘(NHGA)을 개발했다. 사례연구에서는 혼합·이산 비선형 최적화문제를 해결하는데 있어서 NHGA가 상당한 능력을 제공하며 효율적이고 우수한 해를 제공할 수 있다는 것을 보여주고 있다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.193-196
• /
• 2007

본 논문은 관측기 기반 시스템에 대한 강인 디지털 재설계 방안을 제안한다. 디지털 재설계란, 기존의 안정화된 연속시간 플랜트와 이산 시간에서 설계된 디지털 제어기와의 상태 접합 및 안정도 분석을 통해 전체 시스템을 재구성 하는 것을 말한다. 그리고 전 역적 접근을 위한 방안으로서 문제를 볼록 최적화 관점으로 변환 후, 에러가 가질 수 있는 놈의 영역을 최소화 하여 상태 접합을 이루고자 하였다. 본 논문에서는 관측기 기반 시스템에 대한 디지털 재설계를 목표로 하되, 추가적인 파라미터 불확실성을 고려한 강인 디지털 재설계를 구성하게 된다. 파라미터 불확실성은 이산화 과정에서 구조적 형태가 변화하기 때문에, 이를 고려하여 주어진 식을 선형 행렬 부등식 형태로 나타내게 된다. 이 조건들을 통해 디지털 재설계의 상태 접합 및 안정도가 유도 가능하다는 것을 본 논문에서 증명하게 된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1089-1098
• /
• 1992

This paper concerns a discrete time control of noncolocated flexible mechanical systems by using time delay relation. A stability criterion of closed-loop system is derived in discrete time domain and a graphic method is developed for designing controllers. Based on this method, a derivative controller is designed for a simply supported uniform beam in the cases of colocation without time delay and of noncolocation with time delay. Some simulation results show the effectiveness of the suggested control.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.233-238
• /
• 2010

In this paper, we have proposed discrete ray tracing method (DRTM) for numerical analysis of characteristics of electromagnetic propagation along 2D random rough surfaces. The point of the present method is to discretize not only rough surface but also ray tracing. The former helps saving computer memories and the latter does simplifying ray searching algorithm resulting in saving computation time. Numerical calculations are carried out for 2D random rough surfaces, and electric field distributions are shown to check the effectiveness of the proposed DRTM.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.6
• /
• pp.1-8
• /
• 1981

A new desio method of decentraliaed stabilizing controller is proposed for large scale discretetime systems with delays in interconnections. Gain parameters of the local stabilizing controller are determined by utilizing the well-knowon Nyquist array technique in the complex q-plane, where .

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2150-2158
• /
• 2002

A recent research and development has the requirement for the optimization to shorten design time of modified or new product model and to obtain more precise engineering solution. General optimization problem must consider many conflicted objective functions simultaneously. Multi-objective optimization treats the multiple objective functions and constraints with design change. But, real engineering problem doesn't describe accurate constraint and objective function owing to the limit of representation. Therefore this study applies variance analysis on the basis of structure analysis and DOE to the vertical roller mill fur portland cement and proposed statistical design model to evaluate the effect of structural modification with design change by performing practical multi-objective optimization considering mass, stress and deflection.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.374-377
• /
• 2007

본 논문은 Takagi-Sugeno (T-S) 퍼지 모델을 이용하여 이산 시간에서의 비선형 상호 결합 시스템에 대한 분산 동적 출력 궤한 제어기를 제시한다. 이산시간 비선형 상호 결합 시스템의 각 하위 시스템에 대한 T-S 퍼지 모델링을 한 후, 각각에 대해 동적 출력 궤한 제어기를 설계한다. 제어가 된 폐루프 하위 시스템들로 전체 시스템의 평형점이 안정화되는 선형 행렬 부등식 (LMI)을 구하고, 부등식을 이용하여 동적 출력 궤한 제어기의 이득값을 구한다. 마지막으로 모의실험을 통해 분산 동적 출력 궤한 제어기의 효용성을 확인한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.26-30
• /
• 2012

This paper presents the observer design method for discrete-time nonlinear systems with delayed output. It is shown that by considering a nonlinear term of error dynamics as an additional state variable, the discrete-time nonlinear error dynamics with time delay can be transformed into the discrete-time linear one with time delay. Sufficient conditions for existence of state observer are characterized by linear matrix inequalities. Finally, an illustrative example is given in order to show the effectiveness of our design method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.27-37
• /
• 2020

Structural optimization problems with discrete design variables require more function calculations (or finite element analyses) than those in the continuous design space. In this study, a method to find an optimal solution in the discrete design of the truss structure is presented, reducing the number of function calculations. Because a continuous optimal solution is the Karush-Kuhn-Tucker point that satisfies the optimality condition, it is assumed that the discrete optimal solution is around the continuous optimum. Then, response values such as weight, displacement, and stress are predicted using approximate models-referred to as hybrid metamodels-within specified design ranges. The discrete design method using the hybrid metamodels is used as a post-process of the continuous optimization process. Standard truss design problems of 10-bar, 25-bar, 15-bar, and 52-bar are solved to show the usefulness of this method. The results are compared with those of existing methods.