• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.408-416
• /
• 2010

A study on the calibration of an X-band HPS(Hongik Polarimetric Scatterometer) system for ground-based operation is presented in this paper. In order to calibrate the scatterometer system, the degree of its distortions are analyzed by comparison between theoretical- and measured-values using the theoretically well-known calibration targets such as a metal sphere, a trihedral corner reflector(CR) and a metal cylinder. The calibration works in the field conditions depend on the precise and stable measurements of those calibration target. we present a measurement technique, so-called, an automatic 2-D target-scanning technique, using the incidence-angle(${\xi}-$ and ${\phi}-$ directions) control of HPS system. Then, we used STCT(Single-Target Calibration Technique) and GCT(General Calibration Technique) to calibrate a distortion of the scatterometer system, and measured the polarimetric RCS(Radar Cross Section) and phase-difference of a trihedral-CR as a test-target to verify the accuracy of the calibration technique. Then, three different types(i.e., 10, 20, 30 cm) of trihedral-CR were used. we obtained the error ranges about ${\pm}1.0$dB, ${\pm}0.5$ dB in a polarimetric RCS and about $-20^{\circ}{\sim}0^{\circ}$ and ${\pm}5^{\circ}$ in the co-polarized phase-difference by using the GCT and STCT, respectively.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.347-349
• /
• 2010

탄성표면파 필터에 관한 여러 가지 모델링이 연구된 이후, 다양한 필터와 공진기가 신호처리용으로 사용되어, 많은 다른 모델들이 이를 분석하고 통합하기위해 유도되어 왔다. 탄성표면파 필터는 크기가 소형이고 제작이 간편하며, 주변의 전자회로와 조합하기 쉬운 장점이 있다. 비대칭의 진폭특성과 비선형 위상특성을 갖는 필터를 설계하고, 설계된 필터의 설계오차를 보정하기 위해서는 임의의 진폭 및 위상특성을 갖는 필터의 설계방법을 연구한다.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.222-225
• /
• 2003

본 논문에서는 six port 를 사용한 실시간 디지털 직접 변환 수신기를 소개하고 실제 six port 구조를 이용해 구현된 직접 변환 수신기의 성능을 분석한다. 제안한 알고리즘은 송신단과 수신단의 위상 오류를 보정하고 랜덤한 채널 잡음 환경에서도 성능의 저하가 크지 않다. 다음으로는 위상 오류 추정 방법을 사용하여 수신기에서의 성능 향상을 컴퓨터 시뮬레이션을 통해서 살펴보았다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.154-155
• /
• 2003

PMP(Phase Measuring Profilometry)측정법은 투영계와 기록계의 기하학적 구성과 광학계의 정렬적인 문제에 의해서 기본적으로 오차를 가지고 측정된다. 일반적으로 PMP 형상 측정에서 측정면과 광학계의 높이가 피 측정면에 비해서 상당히 큰 경우, CCD 카메라에서 높이 방향으로 측정영역이 작아지게됨으로써 측정위상이 기준면에서의 위치와 높이 방향에 따라서 다르게 나타나고 프로젝터가 측정면에 투영되는 간섭무의의 피치가 다르게 적용된다. (중략)

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.235-238
• /
• 2001

단일 단말기로부터 멀티 통신이 가능하게 됨에 따라 광대역 또는 듀얼대역에서 사용되는 RF 소자 개발이 중요시되고 있다. 그러므로 소형, 저 비용의 멀티대역 VCO(Voltage Controlled Oscillator)개발이 요구된다. 본 논문에서 GSM/DCN 대역에서 사용 가능한 듀얼밴드 VCO을 설계하였다. 하나의 발진부, 듀얼 공진부, 완충증폭기, 스위치회로로 구성되었으며, 위상 보정 기법을 이용하여 각 밴드에 대한 발진 조건을 만족시키므로 사용 부품의 수를 줄일 수 있어 저 비용, 소형화, 낮은 위상잡음(phase noise)을 얻을 수 있다. 설계된 듀얼 VCO는 GSM 대역에서 -110dBc/Hz(100kHz offset) 이하의 위상 잡음과 DCN 대역에서 -108dBc/Hz(100kHz offset)의 위상 특성을 보인다. 출력전력은 0$\pm$3dBm이며 소비전력 7mA로 만족할만한 성능을 보인다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.19-24
• /
• 2000

Optical transmission characteristics of retardation film for obliquely incident light is calculated by using extended Jones calculus and it is geometrically interpreted on Poincare sphere representation as rotational transformation. The characteristics of a retardation film is that while the rotation axis is fixed at a point on the Equator of the Poincar sphere, the rotation angle varies with the direction of incidence. This property can be compensated by using a tandem arrangement of the two optical films whose optic axes do not coincident, and this method can be used for the improvement of the viewing angle characteristics of BTN cells. cells.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.35-46
• /
• 1999

A derotator VLSI which compensates for the frequency and phase errors of a received signal in digital communication systems was developed employing a CORDIC algorithm. The CORDIC circuit directly rotates the input signal according to the phase error information, thus is much simpler than the conventional derotator architecture which consists of a DDFS (Direct Digital Frequency Synthesizer) and a complex multiplier. Since a derotator needs only small phase error accumulation, a fast direction sequence generation method which exploits the linearity of the arctangent function in small angles is utilized in order to enhance the operating speed. The chip was designed and implemented using a $0.6\mu\textrm{m}$ triple metal CMOS process by the full custom layout method. The whole chip size is $6.8\textrm{mm}^2$ and the maximum operating frequency is 25 MHz.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.77-84
• /
• 2000

In this paper, we modelized the multipath fading to Nakagami-m distribution fading channel which can be applied to the extended mobile communication channel environment. We assumed that the phase difference with reference signal happened in the received signal and in the receiver PLL(Phase Locked Loop) is the phase error. To correct the error we propose new RAKE receiver using PLL. In addition, we analyze the performance of DS/SS(Direct Sequence/spread Spectrum) system according to the gain of PLL,$\gamma_n$, the number of RAKE receiver branch L and MIP(Multipath Intensity Profile)'s exponential decay $\delta$. As a result, when the proposed RAKE receiver L Is increased and the $\delta$ is decreased the performance of the system gets better. Futhermore when PLL gain was 30dB, phase is identified. That is when the PLL gain is 30dB, the performance equals with the perfect coherent system's. Therefore, we can correct the phase error by using the proposed RAKE receiver and we proved that the PLL's requested limit gain should be 30dB.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.67-73
• /
• 2005

The thickness of a Si3N4 thin film with a 100m nominal thickness was measured by use of a Mach-Zehnder interferometer. The map of the phase-delay through the thin film was obtained by an interframe intensity-correlation-matrix method that could elliminate phase-shifting errors. After the spatial phase-shifting errors were treated with a least-squares method, the reference to surface of the phase map was estimated. The overall accuracy of the method was found to be 5nm.