• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2583-2585
• /
• 2002

본 논문에서는 다양한 크기와 왜곡을 함유한 질의 얼굴 영상이 들어 왔을 때에도 적용 가능한 동적 링크 구조상에서 얼굴 인식에 관한 것이다. 기존의 동적 링크 구조상에서의 얼굴 인식 기술이 얼굴의 크기와 상관없이 일정한 크기의 그래프가 적용이 되기 때문에 얼굴의 크기가 다른 경우에는 인식을 하지 못하였다. 이러한 단점을 보완하고자 질의 영상의 얼굴 타원 정보를 이용하여 고정된 그래프에 맞게 얼굴 크기를 보정함으로써 기존의 우수한 성능을 유지함과 동시에 동적 링크상에서 다양한 크기와 왜곡을 가진 질의 얼굴 영상을 인식할 수 있도록 한 것이다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.17-24
• /
• 2018

Polar fomat algorithm (PFA) was derived from medical imaging theory, known as back projection, to process synthetic aperture radar(SAR) data. The difference between the operating condition of SAR and back projection assumption makes two distortions. First, the focusing performance of PFA is degraded in proportion to distances from the scene center. Second, the geometric accuracy in SAR images is distorted. Several methods were introduced to mitigate the distortions, but some disadvantages, such as the geometric discontinuity, are arisen when sub-images are combined. This paper proposes the novel method to compensate the geometric distortion with chirp Z-transform (CZT). This method corrects precisely the geometric errors without any problems, because a whole image can be processed all at once.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.541-549
• /
• 2004

In this paper, a new improved EREC based error resilient coding in JPEG-2000 standard is proposed, considering the error sensitive wireless environment with limited channel capacity. In order to apply EREC, we use the variable bit-rate by using R-D optimization. Simulation results demonstrate that the proposed EREC based error resilient coding is more resilient than the error resilient schemes used in JPEG-2000.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.679-682
• /
• 2003

카타디옵트릭 카메라는 거울을 이용하여 $360^{\circ}$의 3차원 이미지를 한 장에 촬영할 수 있는 이미지 시스템이다. 본 논문에서는 이 시스템을 사용할 때에 발생하는 이미지 왜곡 문제를 해결하는 구형투영 알고리즘을 제안한다. 흔히 사용하는 실린더형 알고리즘의 경우 계산은 비교적 간단하지만, 거울의 바로 아래에 있는 물체의 경우 전체적인 영상을 볼 수 없다는 단점이 있다. 본 연구에서 사용한 카메라는 포물면 거울을 사용한 카타디옵트릭 카메라이며, 쌍곡면거울을 사용한 카메라에 대해서도 이론적으로 공식을 유도하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1541-1544
• /
• 2015

최근 스마트폰으로 워터마크가 인쇄된 문서를 촬영하여 유출을 하는 범죄가 일어나고 있으며, 특별한 감시 방안이 없다. 이를 위해 정부 및 기업에서는 문서의 외부 유출을 막기 위해 복사기 및 팩스 장치에 워터마크 패턴 보호 기법을 탑재하여 광학적으로 불법 복제를 방지한다. 특히 기업에 출입시 스마트폰에 보안 앱들을 설치하고, 스마트폰으로 문서를 촬영할 경우 앱이 보안 문서를 인식하여 경고를 시스템에 알린다. 그러나 스마트폰으로 촬영된 영상은 카메라의 위치와 각도에 따라 왜곡 현상이 발생되어 워터마크가 훼손된다. 이렇게 훼손된 영상은 기존 워터마크 패턴 인식 방법으로는 정상적으로 인식 되지 않는 문제가 있다. 본 논문에서는 실험을 통하여 훼손된 워터마크를 보정하고 인식하는 알고리즘을 이용하여 인식률과 처리속도를 높인다.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.691-697
• /
• 2005

Recently, the development of accurate gravity-meter and GPS make it possible to obtain high resolution gravity data. Though gravity data interpretation like modeling and inversion has significantly improved, gravity data processing itself has improved very little. Conventional gravity data processing removes gravity effects due to mass and height difference between base and measurement level. But, it would be a biased density model when some or whole part of anomalous bodies exist above the base level. We attempted to make a multiquadric surface of the survey area from topography with DEM (Digital Elevation Map) data. Then we constituted rectangular blocks which reflect real topography of the survey area by the multiquadric surface. Thus, we were able to carry out 3-D inversions which include information of topography. We named this technique, 3-D Gravity Terrain Inversion (3DGTI). The model test showed that the inversion model from 3DGTI made better results than conventional methods. Furthermore, the 3-dimensional model from the 3DGTI method could maintain topography and as a result, it showed more realistic geologic model. This method was also applied on real field data in Masan-Changwon area. Granitic intrusion is an important geologic characteristic in this area. This method showed more critical geological boundaries than other conventional methods. Therefore, we concluded that in the case of various rocks and rugged terrain, this new method will make better model than convention ones.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.247-254
• /
• 2010

In this paper, a new approach has been studied correcting the geometric distortion of SPOT 4 imagery. Two new equations were induced by the relationship between satellite and the Earth in the space. line-of-sight (LOS) vector adjustment model for SPOT 4 imagery was implemented in this study. This model is to adjust LOS vector under the assumption that the orbital information of satellite provided by receiving station is uncertain and this uncertainty makes a constant error over the image. This model is verified using SPOT 4 satellite image with high look angle and thirty five ground points, which include 10 GCPs(Ground Control Points) and 25 check points, measured by the GPS. In total thirty five points, the geometry of satellite image calculated by given satellite information(such as satellite position, velocity, attitude and look angles, etc) from SPOT 4 satellite image was distorted with a constant error. Through out the study, it was confirmed that the LOS vector adjustment model was able to be applied to SPOT4 satellite image. Using this model, RMSEs (Root Mean Square Errors) of twenty five check points taken by increasing the number of GCPs from two to ten were less than one pixel. As a result, LOS vector adjustment model could efficiently correct the geometry of SPOT4 images with only two GCPs. This method also is expected to get good results for the different satellite images that are similar to the geometry of SPOT images.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.153-159
• /
• 2024

In X-ray projection, Unskilled radiologists become skilled through fail exam. This causes the patient to be exposed to unnecessary radiation. In this study, pre-position unskilled radiologic technologist presented ways to improve clinical proficiency. presented a skull lateral x-ray projection practice method using visual, spatial, and assistive devices. In addition, the accuracy and usefulness of the use of assistive devices were evaluated. When X-ray images were taken based on learning, the rotational spacing, which indicates image distortion, was 7.85 ± 1.45 mm and the tiliting spacing was 4.84 ± 0.5 mm. When practicing using visual aids, the rotational spacing is 4.4 ± 0.76 mm and the inclination spacing is 3.01 ± 0.87 mm. using a spatial compensation device, the rotational spacing is 5.2 ± 0.69 mm and the tiliting spacing is 3.33 ± 0.61 mm. Skull lateral X-ray Image distortion caused by empirical photography practice decreased by 5.4%, but image distortion caused by tilting increased by 1.2%. When practicing using a visual assistive devices, the degree of rotational spacing by 40.1% and the tiliting spacing decreased by 30.7% compared to the empirical x-ray exposure practice. When using spatial assistive devices, the rotation interval was reduced by 41.7% and the tilting interval by 23.7% compared to conventional empirical x-ray exposure practice. Therefore, if an unskilled radiologist practices using visual and spatial aids,the accuracy will be improved in skull lateral x-ray projection.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.546-555
• /
• 2009

There is increasingly interested in the measurement of antenna's characteristics for one's manufacture according to one's various application. Due to this, the antenna measurement system need be made with more and more great precision. On measuring of the antenna's characteristic, the conventional system handled by human generates the error due to controlling the position of the system by user. Therefore there need be introduced the automatic measurement system of antenna's characteristic. In this paper, we propose antenna extraction algorithm for the Antenna automatic measurement system of antenna's characteristic. The proposed algorithm gets the antenna image from antenna measurement system, extracts an antenna object from the image, and extracts the parameters for antenna's slant and antenna's location. The extracted parameters is used to correct location and distortions of the antenna and automatic measurement. The proposed algorithm is applied to the patch antenna. The results show that antenna's object is efficiently extracted and the angle for correcting the error is calculated well.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.535-542
• /
• 2003

This study is concerned with an assistive technology which reduces color blinds´s confusion when they access electronic documents including color objects in their computers. In this study, 1 restrict the assistive technology would apply to windows operating system, 256 color mode and implement to minimize color distortion which occurs in multi window environments because of color approximation process. As a basic palette, I use a 216 colors web safe palette which the Christine proposed as a standard for color blind, expand it to 256 colors to apply all computer displays using Microsoft Windows as its operating system and implement it as windows application. To test its effectiveness, I use a simulator for dichromats, as results of the test, the developed color vision deficiency correction S/W is effective to reduce the confusion. It is more effective to use the implemented S/W in both of design and client process for electronic documents.