• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.216-224
• /
• 2014

층간소음의 대부분의 원인이 아이들 뛰거나 발걸음으로 나타나고 있어 층간소음 저감을 위한 선행 연구로 층간소음의 주요 충격원인 보행 행위에 대한 정밀한 연구가 필요하다. 성인 보행 충격력과 그에 따른 바닥충격음을 계측하여 보행하중이 바닥충격음에 영향을 주는 요소를 분석하였다. 보행하중 중 발 뒤꿈치 충격력은 전체 충격하중을 주파수 특성을 대변할 수 있는 임펄스 형태의 하중으로 충격력은 뱅머신 또는 고무공보다 낮지만 1 차 영점(First zero)이 80Hz 정도로 높아 유효 가진 주파수 대역이 표준 중량충격원 보다 높았다. 구조물과 수음실의 고유모드 특성으로 인해 외부 충격에 대한 구조체 진동 및 음압의 공진 현상이 발생되기 때문에 공진 성분이 포함되는 바닥충격음 레벨은 순수 충격력 특성인 보행 또는 표준 중량충격원의 옥타브 밴드 충격력 폭로레벨과는 전혀 다른 주파수 특성을 나타내었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.458-461
• /
• 2011

이방향 중공슬래브 시스템의 구조특성 및 성능평가 연구의 일부로 실제 건축물에 적용된 이방향 중공슬래브의 연직진동을 측정 및 분석하였다. 캡슐형 경량체를 사용한 이방향 중공슬래브가 적용된 두 건축물에서 바닥 용도상 일상적인 진동발생원이라고 가정할 수 있는 75 kg 성인의 보행, 달리기, 제자리 점프에 대해 슬래브의 연직진동을 측정하였다. 두 대상 건축물은 각각 연구소와 교육시설 용도로 설계 및 건축되었다. 측정된 수직 가속도 데이터로 일본건축학회 환경기준에 (AIJES-2004) 근거하여 진동수 범위 3~30 Hz에 대해 1/3 옥타브 밴드 분석을 실시하였다. 이 분석을 바탕으로 AIJEES-2004에 제시한 기준에 따라 바닥의 연직진동에 대한 거주 성능을 평가한 결과, 측정한 세 건축물에 적용된 이방향 중공슬래브 모두 보행과 달리기에 대해서는 피진동자의 10% 미만이 인지, 제자리 점프에 대해서는 50~70% 미만이 인지할 수 있는 것으로 나타나, 이방향 중공슬래브가 바닥의 연직 진동에 대해 거주 성능이 양호함을 보여주었다.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.91-104
• /
• 2002

Jet noise of propulsion systems is major source of acoustic loads of launch vehicles and sounding rockets. The investigation of characteristics of jet noise is inevitable for successful missions. In this paper, the mechanism of generation of acoustic loads due to jet noise was investigated. The major parameters that change the characteristics of acoustic loads were also suggested so that effects of the parameters could be investigated. The temporal and spatial characteristics of acoustic loads of KSR-III was demonstrated. The results show that the maximum value of the acoustic loads is found in the octave bands whose center frequencies are 250 Hz and 500 Hz. Finally, the methods and the facilities for the further investigation of acoustic loads were proposed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.135-140
• /
• 2010

Vibration on the ship was generated mainly by main engine and propeller. The vibration which is generated from the ship has an effect on durability of ship's machinery and it also has an evil influence on the working conditions for crew. In this research, vibration measurement system to measure ship's vibration was built and vibration signals using acceleration sensors were measured from an accomodation space of training ship. An evaluation of vibration with regard to habitability was also discussed and the evaluation process followed the guidelines ISO6954:2000E.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.818-821
• /
• 2005

The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from 1.5 MW wind turbine generator (WTG) at Yongdang and 660 kW WTG at Hangwon in Jeju Island. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. 1.5 MW WTG at Yongdang is found to emit lower sound power than 660 kW one at Hangwon, which seems to be due to lower rotating speed of the rotor of WTG at Yongdang. Equivalent continuous sound pressure levels (ECSPL) of 660 kW WTG at Hangwon vary more widely with wind speed than those of 1.5 MW WTG at Yongdang. The reason for this is believed to be the fixed blade rotating speed of WTG at Yongdang. One-third octave band analysis of the measured data show that the band components around 400-500 Hz are dominant for 1.5 MW WTG at Yongdang and those around 1K Hz are dominant for 660 kW WTG at Hangwon.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.77-85
• /
• 2001

This paper proposes a method of time-scale modification of polyphonic audio signals based on a sinusoidal model. The signals are modeled with sinusoidal component and noise component. A multiresolution filter bank is designed which splits the input signal into six octave-spaced subbands without aliasing and sinusoidal modeling is applied to each subband signal. To alleviate smearing of transients in time-scale modification a dynamic segmentation method is applied to subbands which determines the analysis-synthesis frame size adaptively to fit time-frequency characteristics of the subband signal. For extracting sinusoidal components and calculating their parameters matching pursuit algorithm is applied to each analysis frame of subband signal. In accordance with spectrum analysis a psychoacoustic model implementing the effect of frequency masking is incorporated with matching pursuit to provide a resonable stop condition of iteration and reduce the number of sinusoids. The noise component obtained by subtracting the synthesized signal with sinusoidal components from the original signal is modeled by line-segment model of short time spectrum envelope. For various polyphonic audio signals the result of simulation shows suggested sinusoidal modeling can synthesize original signal without loss of perceptual quality and do more robust and high quality time-scale modification for large scale factor because of representing transients without any perceptual loss.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.76-86
• /
• 2022

Personal hearing devices, such as hearing aids, may be fine-tuned by allowing the users to conduct self-adjustment. Two self-adjustment procedures were developed to collect the listener preferred gains in six octave-frequency bands from 0.25 kHz to 8 kHz. These procedures were designed to allow rapid exploration of a multi-dimensional parameter space using a simple, one-dimensional user control interface (i.e., a programmable knob). The two procedures differ in whether the user interface controls the gains in all frequency bands simultaneously (Procedure A) or only the gain in one frequency band (Procedure B) on a given trial. Monte-Carlo simulations suggested that for both procedures the gain preference identified by simulated listeners rapidly converged to the ground-truth preferred gain profile over the first 20 trials. Initial behavioral evaluations of the self-adjustment procedures, in terms of test-retest reliability, were conducted using 20 young, normal-hearing listeners. Each estimate of the preferred gain profile took less than 20 minutes. The deviation between two separate estimates of the preferred gain profile, conducted at least a week apart, was about 10 dB ~ 15 dB.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.207-212
• /
• 2006

The noise levels on board ship recognized at Europe in the early 1970s and the noise regulations on board ship began to put in a statutory form. After that, in 1982 "International Code on Noise Levels on Board Ships" adopted by IMO and it became standard to the newly built ship and remain so to this day. Especially, the ship engine room, which have huge main engine and various kinds of subsidiary machines, is under an extremely loud condition and so the worker who works in it is easy to lose his hearing. Recently, each nation regulates the allowable noise exposure time by law to protect the industrial employee from the occupational hardness of hearing. In our country, the allowable noise exposure time is regulated by the labor standard law but the international provisions regulated by IMO have been applied in case of the ship engine room. In this paper, the cabin's noise levels of cargo-passenger ships plies south-west coast line were investigated.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.59-65
• /
• 2000

This paper describes the analysis of vibration characteristics through the human body as the research for voice therapy and diagnosis. The oscillation signal is not external forces but the self-voice to be pronounced the vowels ('a', 'e', 'i', 'o', 'u'). The experiment system consists of microphones, accelerometers and amplifiers. The input data are stored by the computer. At the same time, the voice is stored by the microphone and the vibration signal of the human body is stored by accelerometer. The 63 points are appointed in head, neck, trunk of human body. The positions and number of times are changeable by the purpose. The analysis parameters are amplitude, phase, fundamental. frequency, formant and the correlation of vibration signal and voice is measured by coherence function. The results show that the vibration signals have characteristic vibration in the positions of human body.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.19-28
• /
• 2012

A measuring technique for tire-pavement interaction noise that uses a proposed noble close proximity(NCPX) method, which has been proofed in terms of the reliability and consistency of interaction noise measurement through several researches, equipped with surface microphones has been adopted in order to perform bridge deck pavement noise evaluations on four different pavement surfaces. Through field testing measurement of bridge deck pavement in Seoul inner ring road, the appropriate noise-measuring procedures have been used for evaluating the noise characteristics of four different surfaces. Measuring results show that tire-pavement noise levels vary depending on the surface types and vehicle speeds. Furthermore, the different characteristics of tire-pavement interaction noise can be found before and after the new surface construction of bridge deck pavements in terms of the 1/3 octave band analysis of vehicle speed.