• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.7-13
• /
• 2004

초정밀 공작기계의 기능은 초정밀 운동에 의해 대부분 지배된다. 이러한 운동을 생성하는 고정밀 베어링의 운동정밀도는 이미 나노미터 레벨에 도달하고 있으며, 이러한 운동정밀도를 나노미터 레벨의 정밀도로 측정하는 것(정밀나노계측)이 중요한 과제가 되고 있다. 예를 들어, 초정밀선반 등에 있어서, 공기베어링을 대표로 하는 높은 회전정밀도를 갖는 회전축(주축)이 사용되고 있으며, 따라서 이러한 고정밀 주축의 회전정밀도를 나노미터 레벨의 정밀도로 평가하는 기술은 매우 중요하다. (중략)

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.144-151
• /
• 1997

구조물로부터 측정된 가속도 시간이력을 이용하여 구조손상을 찾아내고 평가하는 기법을 제시하였다. 구조계의 손상을 찾아내는 알고리즘의 주요한 수단으로써 parametric system identification 방법을 사용하였고 매개변수화된 구조물의 최적 매개변수를 추정하기 위해 구속된 비선형 최적화기법을 사용하였다. 손상된 부재를 분리하기 위한 방법으로서 적합적 매개변수 모음법을 적용하였고 손상의 정도를 통계적으로 평가하기 위하여 측정된 가속도 시간이력에 time window 기법을 적용하였다. 가속도 이력 측정에 있어서의 불충분성과 측정오차를 고려하여 알고리즘을 개발하였고, 조화진동하중으로 구조물을 가진하여 구조 손상을 진단하는 수치모의 실험을 실시하였다.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.281-288
• /
• 2009

Using analytical method, intrinsic absorption and scattering attenuation was lately separated from total quality factor $(Q^{-1}_t)$ on the seismic data of Korean Peninsula. However, we should use numerical method rather than the analytical method to consider depth dependent structure of scattering. The direct simulation Monte Carlo (DSMC) method, as a kind of the numerical method, is good option due to its extended availability from 1 to 3-dimensional model; but there is few study to use it. In this paper, we introduced the analytical method and the DSMC method, and compared the results of the two analysis applied to the isotropic scattering model. While the scattering attenuation coefficients $(\eta_s)$ are identical, the intrinsic absorption coefficients $(\eta_i)$ for the analytical method are larger than those for DSMC method and have large errors. In addition, the $(Q^{-1}_t)$ by the previous studies show closer to DSMC method than analytical method.

• 전기의세계
• /
• v.25 no.2
• /
• pp.72-74
• /
• 1976

유도전동기의 원선도의 작도 및 특성산정에 있어서 여자임피던스를 입력단자간에 이동하여 간이화한 등가L회로 그리고 1차와 2차의 누설리액턴스가 동일하다고 가정하여 여자임피던스를 1차와 2차의 임피던스의 중간에 접속한 등가T회로를 사용하고 있으며 후자에 의한 원선도작도법 및 특성산정법은 전자에 의한 것보다 정확하다고 인정되어 있다 그러나 1차와 2차의 누설리액턴스가 동일하다는 가정은 실제의 기계에서는 만족되지 않을 뿐 아니라 구속시험에 있어서 구속의 경우 생기는 동손이외의 손실 및 여자리액턴스이 영향을 고려하지 않고 회로정수를 결정하고 이것을 사용하여야 하므로 그 원선도작도법 및 특성산정법으로서는 상당한 오차가 생길 것이다. 본문에서는 이러한 것들을 고려하여 1차와 2차의 누설리액턴스를 분리하지 않는 등가T회로에 의하여 1차누설리액턴스를 사용하지 않고 작도할 수 있는 원선도 그리고 구속의 경우 생기는 동손이외의 손실 및 여자리액턴스의 영향을 고려하여 결정한 그 등가T회로정수를 사용하는 특성산정법을 소개하고자 한다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.199-203
• /
• 1997

Fine displacement of spherical suface was detected and analyzed by Twyman-Green interferometer and the interferogram analysis using Fourier transform method. The surface profile was obtained from single interferogram by introducing the carrier freguency to the interferogram. The interferogram was processed in the spatial frequency domain by fast Fourier transform, and the phase distribution was obtained by inverse Fourier transform. The 3-dimensional distribution for the surface displacement was obtained. It was compared with the calculated surface displacement and the error was less than λ/10.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.64-74
• /
• 2014

The primary and ambient signal decomposition of a stereo sound is a key step to the stereo upmix. The principal component analysis (PCA) is one of the most widely used methods of primary-ambient signal decomposition. However, previous PCA-based decomposition algorithms assume that stereo sound sources are only amplitude-panned without any consideration of phase difference. So it occurs some performance degradation in case of live recorded stereo sound. In this paper, we propose a new PCA-based stereo decomposition algorithm that can consider the phase difference between the channel signals. The proposed algorithm overcomes limitation of conventional signal model using PCA with phase alignment. The phase alignment is realized by using inter-channel phase difference (IPD) which is widely used in parametric stereo coding. Moreover, Enhanced Modified PCA(EMPCA) is combined to solve the problem of conventional PCA caused by Primary to Ambient energy Ratio(PAR) and panning angle dependency. The simulation results are presented to show the improvements of the proposed algorithm.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.97-101
• /
• 2010

(R)-N-3,5-dinitrobenzoyl (DNB) phenylglycinol derived chiral selector was used as a HPLC chiral stationary phase (CSP) for the resolution of racemic N-acylnaphthylalkylamines. In this study, determination of optical purity was performed by both chiral chromatography and NMR spectroscopy by using the (R)-phenylglycinol derived chiral selector. The data of accuracy and precision of each optical purity value are calculated from the results of NMR and HPLC experiments by comparing with true value. Average error of the NMR method was +2.2% with average RSD of 4.54%, while that of HPLC method was -3.5% with average RSD of 3.23%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.437-441
• /
• 1999

In this paper, a fault diagnosis method using unknown-input proportional integral (PI) observers including the magnitude of actuator failures is proposed. It is shown that actuator failures are detected and isolated perfectly by monitoring the integrated error between the actual output and the estimated output using an unknown-input PI observer. Also in presence of complex actuator and sensor failures, these failures are detected and isolated by multiple unknown-input PI observers perfectly.

• Journal of Korea Water Resources Association
• /
• v.32 no.4
• /
• pp.437-445
• /
• 1999

The present paper describes the problem of hydrologic response estimation using non-parametric ridge regression method. The method adapted in this work is based on the minimization of the $C_L$ statistics, which is an estimate of the mean square prediction error. For this method, effects of using both the identity matrix and the Laplacian matrix were considered. In addition, we evaluated methods for estimating the error variance of the impulse response. As a result of analyzing synthetic and real data, a good estimation was made when the Laplacian matrix for the weighting matrix and the bias corrected estimate for the error variance were used. The method and procedure presented in present paper will play a robust and effective role on separating hydrologic response.

• Water for future
• /
• v.27 no.2
• /
• pp.155-166
• /
• 1994

Various Eulerian-Lagrangian numerical models for the one-dimensional longitudinal dispersion equation are studied comparatively. In the model studied, the transport equation is decoupled into two component parts by the operator-splitting approach ; one part governing adveciton and the other dispersion. The advection equation has been solved using the method of characteristics following fluid particles along the characteristic line and the results are interpolated onto an Eulerian grid on which the dispersion equation is solved by Crank-Nicholson type finite difference method. In solving the advection equation, various interpolation schemes are tested. Among those, Hermite interpolation polynomials are superior to Lagrange interpolation polynomials in reducing dissipation and dispersion errors in the simulation.