• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.433-444
• /
• 2018

This study aims to examine the screening rate of health screening of the disabled by screening the data of disability and health statistics of the National Health Insurance Corporation, to suggest the problems of health examination and the future improvement measures, and also to review the type of health management of the disabled based on the results of health examination interview. As people with limited daily life or social life for a long time because of their physical/psychological disabilities in accordance with the Article2 of , out of 2,479,080 registered people with disabilities on the basis of December 31st 2015, the research subjects were limited to people with disabilities who participated in the health screening and health type for presenting the opinions about policies. In conclusion, regarding the health screening for the disabled, first, it would be necessary to collect the opinions from people with disabilities in order to prepare the health screening service suitable for them. Second, it would be needed to develop the health screening items for each type of disability and severity. Third, it would be necessary to consider the medical equipments and amenities of health examination for the disabled. Fourth, there should be the securement of manpower and education for service providers. Fifth, the mobility right of the disabled should be secured. Regarding the health type of the disabled, first, the expert consultative group in each area should be composed for the health enhancement of the disabled. Second, it would be necessary to screening the current status of health enhancement programs for the disabled and operating facilities. Third, the Central Health Medical Center for the Disabled, shown in the law on the securement of health rights & medical accessibility of the disabled should develop the standardized health enhancement programs for each disability type and severity. After examining the contents of health examination and health type of the disabled, the opinions about policies were suggested. Thus, in the future, there should be more detailed researches based on the tasks suggested by this study, and also the causal relations between health of the disabled and relevant programs should be continuously revealed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1435-1442
• /
• 2008

The purpose of this study was to identify the influence of consumption value on healthy functional food choice. Also, this study explored the role of health motivation, health concern, and food involvement as a moderating variable in the relationship between consumption value and healthy functional food choice. A total of 281 responses were collected using on-site survey (response rate 96.0%) from college students in Daegu, Gyeoungbuk Province. The questionnaire contained questions on consumption value, health motivation, health concern, food involvement, and purchasing intention of healthy functional food. The respondents rated the items using a 5-point scale from 1 (strongly disagree) to 5 (strongly agree). According to the confirmatory factor analysis, item evaluating using factor loading resulted in the retention of 25 consumption value items loading on seven factors, four health motivation items loading one factor, six health concern items loading on one factor, and four food involvement items loading on one factor with an internal consistency. Results of stepwise regression found that social value-I, emotional, functional, epistemic, and conditional values among consumption value determined the purchasing intention of healthy functional food. Results of hierarchical regression showed that health concern had a positive effect on the relationship between social value-I and purchasing intention of healthy functional food.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.165-165
• /
• 2017

지난 수 십 년 동안, 전 세계적으로 자원의 소비가 급격히 증가하게 되면서 최근 자원 고갈은 물론 환경오염이 커다란 이슈로 문제가 되고 있다. 이에 따라 재료 관련 분야에 있어서는 보다 효율적이고 친환경적인 방법으로 자원을 활용해야 된다는 필요성이 대두되었고 이와 같은 관점에서 목적하는 성분이 우수하고 환경 친화적인 표면처리 재료 개발연구가 활발하게 진행되고 있는 실정이다. 그 중 플라즈마 전해 산화(Plasma Electrolytic Oxidation, PEO)는 알루미늄, 마그네슘 등의 경금속의 경도를 향상시키고 높은 내마모성, 내식성을 갖게 하는 표면처리로써 그 관심이 증가하고 있다. 이 플라즈마 전해 산화는 일반적으로 공정비용 대비 효과적이고 환경 친화적이며 코팅 성능 면에서 우수하다고 알려져 있다. 이러한 고유한 특성으로 인해 플라즈마 전해 산화 코팅은 최근 몇 년 동안 기계, 자동차, 우주항공, 의학 및 전기 산업 등의 분야에서 그 적용이 점차 증가하고 있는 상황이다. 한편, 플라즈마 전해 산화 코팅을 하는 모재들의 경우 부동태 산화피막을 용이하게 형성할 수 있는 특성의 모재에 한정되고 있어서 그 응용확대에 한계가 있는 것이 사실이다. 따라서 본 연구에서는 플라즈마 전해 산화법을 사용하여 용융알루미늄도금 강판 상에 산화피막 형성을 시도하였다. 전원공급 장치의 양극은 전해질 속에 잠겨있는 작동전극에 연결하고 음극은 대전극 역할을 하는 스테인레스강 전해질 용기에 연결되었다. 전해질은 Sodium Aluminate 및 기타 첨가제를 함유한 것을 사용하였고 온도는 열교환기를 사용하여 $30^{\circ}C$ 이하로 유지되었다. 또한 여기서 전류밀도는 $5{\sim}10A/dm^2$, 실험 주파수는 700Hz, Duty cycle은 30 및 90%의 각 조건에서 공정처리 시간을 각각 30분 및 60분 동안 진행하였다. 이와 같은 조건에서 형성한 막들에 대해서는 주사형전자현미경(SEM)을 이용하여 코팅 막의 표면 및 단면의 모폴로지를 관찰하였음은 물론 EDS 및 XRD 측정을 통하여 원소조성분포 및 결정구조를 각각 분석하였다. 또한 이 코팅 막들에 대한 내식성은 5% 염수분무 환경 중 노출시험(Salt spray test), 3% NaCl 용액에서의 침지 시험 및 전기화학적 동전위 양극분극(Potentiodynamic Polarization) 시험을 진행하여 평가하였다. 이상의 실험결과에 의하면, 제작조건별 플라즈마 전해 산화 코팅 막의 모폴로지 및 결정구조가 상이하게 나타나는 것을 알 수 있었다. 코팅 막의 모폴로지 관찰 결과, 공정 시간에 비례하여 표면에 존재하는 원형 기공의 수는 감소하였으나 그 크기가 커지고 크레이터의 직경 또한 커진 것이 확인되었다. 이 기공은 마이크로 방전에 의해 형성된다고 알려져 있는데 공정 시간이 증가함에 따라 코팅 두께가 점차 증가하여 마이크로 방전의 빈도수가 줄어들고 그 강도는 증가하게 되어 기공 크기가 증가한 것으로 사료된다. 또한 공정시간이 긴 시편에서 표면에 크랙이 다수 존재하는 것으로 확인되었다. 이것은 방전에 의해 고온이 된 소재가 차가운 전해질과 만나게 되어 생긴 큰 온도구배로 인해 강한 열응력이 발생하여 균열을 초래한 것으로 보인다. 조성원소 분석 결과 원형 기공 주변의 크레이터 영역에는 알루미늄이 풍부하였으며 그 주변에 결절상을 갖는 구조에서는 전해질 성분의 원소가 포함되어 있는 것이 확인되었다. 이러한 코팅 막의 표면 특성은 내식성에 영향을 주게 된 원인으로 사료된다. 동전위 분극측정 결과에 의하면 플라즈마 전해 산화 공정 시간이 길어질수록 부식전류밀도가 증가하였다. 이것은 공정시간이 길어짐에 따라 강한 방전이 발생하여 기공의 크기가 증가하고 크랙이 발생하게 되면서 내식성이 저하된 것으로 판단된다. 종합적으로 재료특성 분석 및 내식성 평가를 분석한 결과, 플라즈마 전해 산화의 공정 시간이 너무 길게 되면 오히려 내식성은 저하되는 것이 확인되었다. 이상의 연구를 통하여 고내식 특성을 갖는 플라즈마 전해 산화 막의 유효성을 확인하였으며 용융알루미늄강판 상에 실시한 플라즈마 전해 산화 처리에 대한 기초적인 응용 지침을 제시할 수 있을 것으로 사료된다.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.123-132
• /
• 1997

In the system $MgO-SiO_2-H_2O$, Talc[$Mg_3Si_4O_{10}(OH)_2$] has been synthesized hydrothermally at 200 MPa, $600^{\circ}C$ from the oxide mixture of the bulk composition of talc. The oxide mixture of the bulk composition of anthophyllite$[Mg_7Si_8O_{22}(OH)2]$ converted to talc, enstatite $(MgSiO_3)$, quartz at 200 MPa, $750^{\circ}C$ with excess of $H_2O$. In low to medium pressure metramorphism, enstatite-talc assemblage is metastable relative to anthophyllite with the reaction talc + 4 enstatite=anthophyllite (Greenwood, 1963). The high temperature stability of talc is bounded with the dehydration reaction to anthophyllite rather than that to enstatite(Greenwood, 1963; Chernosky et al., 1985). Therefore our experiment result assemblage, enstatite-talc-quatz at 200 MPa, $750^{\circ}C$ from oxide mixture of bulk compostion of anthophyllite is metastable assemblage. The hydrothermal experiment performed at 41 to 243 MPa, 680 to $760^{\circ}C$ with the starting material composed of synthetic talc, enstatite and quartz. Talc or enstatite grows during the runs and no extra phases including anthophyllite nucleated. Based on the increase or decrease of the each phase from run products, one of the possible reactions is talc=3 enstatite+quartz+H_2O$. The reversal bracket of the reaction is 699 to $700^{\circ}C$ at 100 MPa. Talc is stable up to $740^{\circ}C$ at 200 MPa and enstatite grow at $680^{\circ}C$, 40 MPa and at $760^{\circ}C$, 250 MPa. Though the high temperature limit of talc around 200 MPa is bounded thermodynamically by the reaction, 7 talc=3 anthophyllite+4 quartz+4 H_2O$, talc persisted throughout the previous reaction up to the reaction, talc=3 enstatite+quartz+$H_2O$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.1-14
• /
• 2015

In the West, of the body's five senses sight is considered the most important but Ocular-centralistic thinking contains many issues. Privileging the subject and inhibiting interaction with the other senses, Ocular-centrism limits the experience of the world to the visual area. However, experiences can be understood as 'touching' various forms and are related to touch. With the heightened interest in the multi-sensuous side of the body contrary to Ocular-centrism, the intervention of the body in the external space has become an important issue in modern landscape architecture. This study explores the possibility of the haptic perception system that causes the active experience of a subject. Haptic perception plays a catalytic role leading an active experience of the subject and the subject experiences a sense of place through such haptic perception. By revealing what was known through the sense of touch through the concurrency and interaction of the various senses, haptic perception draws active participation The haptic perception system has been studied in various fields but has not been studied in the field of landscape architecture. Thus, this study discusses the aspect of haptic perception limited to landscape architecture shown before modernism. In a discussion on haptic perception, the concept of haptic perception is clarified through previous study reviews and literature and the characteristics of haptic perception are derived. Then, the problems of the Ocular-centrism system and the need for haptic perception are discussed. In the historical development process of haptic perception, the change process of the scopic regime is examined chronologically and the ways in which Ocular-centralistic thinking and anti-Ocular-centralistic thinking have been projected on the architecture and landscape architecture of each age are studied via literature and cases studies. The impact of the scopic regime on the landscape architecture field in the historical change process is examined.

• Journal of The Korean Association For Science Education
• /
• v.41 no.1
• /
• pp.33-46
• /
• 2021

Inquiry occupies an important place in science education, and research related to inquiry is widely conducted. However, due to the inclusiveness of the concept of "exploration," each researcher perceives its meaning differently, and approaches may vary. In addition, criticisms have been raised that the results of classes using inquiry in science education do not guarantee meaningful changes to students. Therefore, this study attempts to identify the trend of SSCI-level research papers dealing with inquiry in science education over the past three years to confirm the current status and effectiveness of the inquiry. Researches used in the analysis are International Journal of Science Education, Journal of Research in Science Teaching, Research in Science Education, and Science Education, and limited to those that directly suggest "inquiry (enquiry)" as a keyword. Based on extracted 75 papers, the classification process was conducted, and an analysis frame was derived inductively by reflecting the subject and characteristics. Specific cases for each category were presented by dividing into three aspects: perception and perspective on inquiry, support and strategy for inquiry, and teacher professional development for inquiry. The results of examining the implications for scientific inquiry are as follows: First, rather than defining inquiry as an implicit proposition or presenting it as a step-by-step procedure, it was induced to grasp the meaning of inquiry more comprehensively and holistically. Second, as to whether the inquiry-based instruction is effective in all aspects of the cognitive, functional, and affective domains of science, the limitations are clearly presented, and the context-dependent and subject-specific properties and limitations of inquiry are emphasized. Third, uncertainty in science inquiry-based instruction can help learners to begin their inquiry and develop interest, but in the process of recognizing data and restructuring knowledge, explicit and specific guidance and scaffolding should be provided at an appropriate timing.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.147-157
• /
• 2013

With the advent of the digital environment that can be accessed anytime, anywhere with the introduction of high-speed network, the free distribution and use of digital content were made possible. Ironically this environment is raising a variety of copyright infringement, and product images used in the online shopping mall are pirated frequently. There are many controversial issues whether shopping mall images are creative works or not. According to Supreme Court's decision in 2001, to ad pictures taken with ham products is simply a clone of the appearance of objects to deliver nothing but the decision was not only creative expression. But for the photographer's losses recognized in the advertising photo shoot takes the typical cost was estimated damages. According to Seoul District Court precedents in 2003, if there are the photographer's personality and creativity in the selection of the subject, the composition of the set, the direction and amount of light control, set the angle of the camera, shutter speed, shutter chance, other shooting methods for capturing, developing and printing process, the works should be protected by copyright law by the Court's sentence. In order to receive copyright protection of the shopping mall images by the law, it is simply not to convey the status of the product, the photographer's personality and creativity can be recognized that it requires effort. Accordingly, the cost of making the mall image increases, and the necessity for copyright protection becomes higher. The product images of the online shopping mall have a very unique configuration unlike the general pictures such as portraits and landscape photos and, therefore, the general image watermarking technique can not satisfy the requirements of the image watermarking. Because background of product images commonly used in shopping malls is white or black, or gray scale (gradient) color, it is difficult to utilize the space to embed a watermark and the area is very sensitive even a slight change. In this paper, the characteristics of images used in shopping malls are analyzed and a watermarking technology which is suitable to the shopping mall images is proposed. The proposed image watermarking technology divide a product image into smaller blocks, and the corresponding blocks are transformed by DCT (Discrete Cosine Transform), and then the watermark information was inserted into images using quantization of DCT coefficients. Because uniform treatment of the DCT coefficients for quantization cause visual blocking artifacts, the proposed algorithm used weighted mask which quantizes finely the coefficients located block boundaries and coarsely the coefficients located center area of the block. This mask improves subjective visual quality as well as the objective quality of the images. In addition, in order to improve the safety of the algorithm, the blocks which is embedded the watermark are randomly selected and the turbo code is used to reduce the BER when extracting the watermark. The PSNR(Peak Signal to Noise Ratio) of the shopping mall image watermarked by the proposed algorithm is 40.7~48.5[dB] and BER(Bit Error Rate) after JPEG with QF = 70 is 0. This means the watermarked image is high quality and the algorithm is robust to JPEG compression that is used generally at the online shopping malls. Also, for 40% change in size and 40 degrees of rotation, the BER is 0. In general, the shopping malls are used compressed images with QF which is higher than 90. Because the pirated image is used to replicate from original image, the proposed algorithm can identify the copyright infringement in the most cases. As shown the experimental results, the proposed algorithm is suitable to the shopping mall images with simple background. However, the future study should be carried out to enhance the robustness of the proposed algorithm because the robustness loss is occurred after mask process.

• Journal of Chest Surgery
• /
• v.40 no.3 s.272
• /
• pp.159-167
• /
• 2007

Background: Vocabularies originating from Chinese characters constitute an important common factor in the medical terminologies used 3 eastern Asian countries; Korea, China and Japan. This study was performed to comparatively analyze the medical terminologies of these 3 countries in the field of cardiopulmonary bypass (CPB) and; thereby, facilitate further understanding among the 3 medical societies. Material and Method: A total of 129 English terms (core 85 and related 44) in the field of CPB were selected and translated into each country's official terminology, with help from Seoul National University Hospital (Korea), Tokyo Michi Memorial Hospital(Japan), and Yanbian Welfare Hospital and Harbin Children Hospital (China). Dictionaries and CPB textbooks were also cited. In addition to the official terminology used in each country, the frequency of use of English terms in a clinical setting was also analyzed. Result and Conclusion: Among the 129 terms, 28 (21.7%) were identical between the 3 countries, as based on the Chinese characters. 86 terms were identical between only two countries, mostly between Korea and Japan. As a result, the identity rate in CPB terminology between Korea and Japan was 86.8%; whereas, between Korea and China and between Japan and China the rates were both 24.8%. The frequency of use of English terms in clinical practices was much higher in Korea and Japan than in China. Despite some inherent limitations involved in the analysis, this study can be a meaningful foundation in facilitating mutual understanding between the medical societies of these 3 eastern Asian countries.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.73-80
• /
• 2006

The main purpose of this study is to help develop the productional system of the three dimensional digital animation domestically. Many 30 digital animation projects are being developed and finished with foreign computer graphics technology. However, the 3D animation market in Korea is not as good as the ones in other countries. One of the most significant problems is the lack of a program of study in Korea concerning productional systems used to create 3D animation. We previously imported an advanced productional system from the U.S., which was adaptable to big projects, and consequently, expanded the international digital animation market. Now, we need to develop a new production system which is fully adaptable to the Korean market. A non-sequential system of 3D digital animation tailored for small projects is more adaptable to domestic industry than the sequential system known as the 'Pipeline system.' A non-sequential system is good for small productions that are trying to create animation on a limited budget. The workers in this system can learn to make animation fast and effectively. They can also learn how to discuss with the others in order to avoid duplication of action. In contrast, in the Pipeline System, many workers repeat confirmation steps during the process for the same animations. The benefit of the non-sequential system is that the worker's interest and education can speed up production, because he/she can quickly learn every step of the animation process instead of just doing a particular job which does not allow him/her to observe the other steps involved. The 'animatic' step is the most important in the non-sequential system. The final animation is produced from the animatic. It is developed from scratch through to the final product but only after the agreement of all the workers, including a director.