• Spatial Information Research
• /
• v.21 no.2
• /
• pp.99-106
• /
• 2013

Through the rapid economic growth, modern society have achieved the industrialization but needed to respond to climate change and low-carbon green growth on a scale of urban area. Many studies about the low-carbon city and the green city are on going, but most of them are not integrated but go along in each area(construction, transportation, energy, etc) In this paper, we surveyed the current status of researches about information system to design low-carbon city or green city, and define the method to integrate the outcomes from the each area. As a result integrated model of 'Low-carbon Urban Planning integrated System' in the paper, Individual system is developed by way of C/S form because web system raised problems for data load in analysis. The integrated system was decided to develop by way of Web form, and integrated system was developed by can use the analysed DB in the individual system. We expect this study can help future researches to develop more economical and efficient integrated information system model to design the low-carbon city and the green city.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.807-815
• /
• 2017

Auxetic structures with negative Poisson's ratio can be used to achieve high mechanical properties in energy absorption and destruction toughness. In this paper, we aim to design an auxetic structure which has a high negative Poisson's ratio and a stiffness over 50N/mm by using an optimization method. Length(L), thickness(t) and angle(${\theta}_1$, ${\theta}_2$) of an auxetic pyramid are the design parameters, and also stress, Poisson's ratio and stiffness are thr reaction factors. We used Box-Behnken method and conducted 4 factors - 3 levels experiment design. Finite element models are analyzed by using Edison program CSD_EPLAST.

• Journal of the Korean Chemical Society
• /
• v.50 no.3
• /
• pp.196-202
• /
• 2006

The self diffusion distributions of viscoelastic molten polyurethanes were determined from the relationship between the relaxation spectra and the distribution of self diffusion. The relaxation spectra of ester, PCL and PCL dyed type molten polyurethanes were obtained by applying the experimental stress relaxation curves to the theoretical equation of the Ree-Eyring and Maxwell non-Newtonian model(REM model) from computer calculation. The experiments were carried out at various temperatures using the physica rheometer with the temperature controller. The self diffusion and hole distance of amorphous region of polyurethane samples were investigated by experiments of stress relaxation. The diffusion coefficients and hole volumes were calculated from rheological parameters and crystallite size in order to study the diffusion of flow segments in amorphous region. It was observed that the relaxation spectra and self diffusions of these polymer samples are directly related to the distribution of molecular weights, viscosities, hole volumes and activation energies of flow segments.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.371-379
• /
• 2010

Since Kyoto Protocol to the United Nations Framework Convention on Climate Change in 2005 takes effect, the transportation policies of most countries move toward encouraging the use of the transit mode with energy efficient and low carbon. Korea is 8th country of producing Co2 emissions and will be one of obligation countries decreasing Co2 after year 2013. In order to improve the efficiency of national transport system investment, this study developed the strategies toward rail-oriented transport system by considering operational speed and accessability, rail-oriented development, and introduce of ubiquitous technique in railway. The four major strategies targeted for future year are introduced here such as One-hour rail(connecting major cities within one hour), Seamless 30(accessing major railway stations within 30 minutes, Rail urbanism (railway-based urban planning), and U-rail (railway service with ubiquitous technique). Each strategy includes several action plans and their priorities are investigated using AHP(Analytic Hierarchy Process) to organize them by time scheme as short, mid, and long term perspective.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.140-148
• /
• 2002

Anisotropic elastic constants of Zr-2.5Nb pressure tube materials were determined by a high temperature resonant ultrasound spectroscopy (RUS). The resonant frequencies were measured using alumina wave-guides and wide band ultrasonic transducers in a small furnace. The rectangular parallelepiped specimens were fabricated along with the axial, radial and circumferential direction of the pressure tube. A nine elastic stiffness tensor for orthotropic symmetry was determined in the range of room temperature ${\sim}500^{\circ}C$. As the temperature increases, the elastic constant tensor, cij gradually decreases. Higher elastic constants along the transverse direction compared to those along the axial or radial direction are similar to the case of Young's modulus or shear modulus. A crossing of shear elastic constants along axial direction and radial direction was observed near $150^{\circ}C$. This fact corresponds to the crossing of c44 and c66 of single crystal zirconium.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.198-198
• /
• 1999

본 연구는 진공상태에서 단단한 물질로 된 diamond stylus로 단결정 MgO 표면에 마모(abrasion)가 할 때 발생되는 Photon emission(PHE), electron emission(EE), 마찰력을 시간의 함수로 동시에 측정하였다. 마모가 일어나는 동안 PHE 와 EE을 시간의 함수로 측정하면 마찰력 신호(signal)와 일치하지 않고 강한 fluctuation을 보여주고 있다. 마모를 가할 때 PHE와 EE의 signal은 wear 실험이 지속되는 동안은 force signal과 관계가 있다. 그러나 변형과 마찰력의 시간의 함수에는 관계하지 않음을 알 수 있다. 본 실험에서 사용된 실험장치는 PhE, EE, frictional force을 동시에 실할 수 있는 장치이다. 광자방출 실험은 공기 중에서도 할 수 있으나 전자방출은 진공에서 얻을 수 있으므로 1$\times$10-4pa하에서 실험하였다. 전자방출은 Channel electron multiplier(bias-100V)로 검출하였고, 광자 에너지는 Gencom photomultiplier를 사용하여 180~600nm의 photon을 측정하였다. 마모는 탐색기에 관계되는 접촉점의 움직임에 관계없이 실험하였다. 시료의 처리과정과 load속도에 따른 PhE, EE, data의 방출은 시료의 표면 상태에 따라 좌우되었다. cleaved 표면은 polished 표면보다 강한 emission을 나타내었다. 이것은 마찰이 표면 상태에 의존됨을 볼 수 있었다. 속도에 따라 emission이 증가하다가 ~0.5m/s이상에서 포화상태에 도달하였다. emission 측정은 열처리한 시료와 열처리 안한 시료를 비교하였다. 발광도(luminescence)는 주로 변형(deformation)에 의해 생겼으며, 전자 방출은 벽개(fracture)에 의해 발생됨을 알 수 있었다. 측정한 3개의 signal을 시간에 따라 분석하면 stick-slip-like 현상을 볼 수 있었다. 이것으로 보아 stick은 변형에 의해 생기고 ms 후에 벽개 현상이 발생됨을 볼 수 있다. 이러한 방출 현상은 마모시 일어나는 세라믹의 급격한 벽개 과정을 이해하는 데 많은 도움을 주었다. PhE와 EE signal은 다이아몬드 stylus로 단결정 MgO 기판에 마모를 가할 때 ms 단위로 검출 할 수 있었다. 방출과 마찰력은 표면조건, load, stylus velocity에 따라 변하였다. 마찰력, PhE, EE의 시간에 따른 분석에서 PhE는 변형 과정에 민감하며, EE는 stylus velocity에 의존하였다. 본 연구의 MgO 마찰 실험에서 표면 변화에 대한 정보를 얻을 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.297-305
• /
• 2016

This study aims to analyze characteristics of environmental load for the construction phase of PSC beam bridge based on Life Cycle Assessment. For detail computation of environmental load, the construction materials and energy consumption are derived from the BOQ, also connecting with environmental load by Korea LCI Database Information Network. The characteristic of environmental impact was analyzed by 25 cases and cut-off ratio was 80% to 94%. The result sorted by construction materials revealed that environmental load were 53.3% for ready-mixed concrete, 9.6% for wire rod, 7.8% for rebar, 6.8% for cement, 5.5% for plywood, and 5.2% for energy. Furthermore, the result of environmental impact revealed that 45.5% for global warming, 30.4% for abiotic resources depletion, 10.5% for human toxicity, and 8.9% for photochemical oxidant creation. In the future, we can make a decision considering environmental load based on LCA at design phase.

• Journal of the Korean Chemical Society
• /
• v.22 no.2
• /
• pp.67-77
• /
• 1978

MO's of a complex are expanded in terms of the set of Shull-Lowdin functions based on a single point, the nucleus of central metal ion, and the result was interpreted from the viewpoint of perturbation theory. We find that even in the case of $[NiF_6]^{4-}$, which has relatively small covalency, excited configurations with high orbital angular momentum are considerably mixed into $e_g$ and $t_{2g}$, orbitals of central metal ion, and that the distortions in these orbitals differ from each other. Therefore it is concluded that the energy difference between $e^*_g$ and $t^*_{2g}$, orbitals evaluated in the MO scheme has little meaning of the unique parameter 10Dq in the crystal field theory, and that such a unique parameter cannot be defined in a rigorous sense in the MO scheme.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.148-148
• /
• 2011

Riemann 문제는 천수방정식과 같은 쌍곡선형 방정식과 단일한 도약에 의해 불연속인 어떤 점의 좌 우에서 상수인 자료로 구성되는 초기치 문제로서 그 해법은 Godunov 방법과 같이 정확해에 의하면 정확 Riemann 해법, 근사 기법에 의하면 근사 Riemann 해법으로 불린다. 지금까지 이용되는 근사 Riemann 해법으로는 1981년에 P. L. Roe가 제안한 Roe의 선형화 기법과 1983년에 A. Harten, P. D. Lax, 그리고 B. van Leer가 제안한 HLL 기법의 수정 기법들이다. 최대 및 최소 파속만 고려하는 것으로 알려진 HLL 기법은 1988년에 B. Einfeldt의 제안에 의해 두 파속의 결정에서 Roe의 선형화 기법에 따른 고유치와 비교하는 것으로 수정되었다(HLLE 기법). 또한, 1994년에 E. F. Toro 등은 접촉파를 고려하기 위해 선형화된 지배방정식의 정확해로부터 중앙 파속을 고려하는 기법을 제안하였고, 이를 HLLC 기법으로 불렀다. 2002년에 T. Linde는 중앙 파속을 평가하기 위해 일반화된(수학적) 엔트로피 함수를 도입하였으며, van Leer는 이를 HLLL 기법으로 불렀다. 이 기법에서는 접촉파의 평가를 위해 보존변수에 대한 일반화된 엔트로피 함수로부터 중앙 파속이 유도되며, 이것과 특성 속도의 비교를 통해 최대 및 최소 파속이 결정된다. 따라서 이 기법에서는 모든 파속이 초기치로부터 결정되므로 HLLE 기법과 달리 Roe의 선형화 기법과 완전히 결별되고 HLLC 기법과 달리 정확해에 의존되지 않는 점에서 HLLL 기법은 모태인 HLL 기법의 온전한 계승으로 볼 수 있다. HLLL 기법은 여러 분야에 적용된 바 있으나, 수공학 분야에 적용된 사례는 알려진 바 없다. 이는 천수방정식에 대한 (물리적) 엔트로피 함수가 명확하지 않기 때문인 것으로 보인다. 이 연구에서는 보존변수로부터 정의되는 총 에너지를 일반화된 엔트로피 함수로 간주하여 모형을 구성하고, 정확해가 알려진 1차원 문제에 대해 적용성을 검토하였다. 정확해가 알려진 경우에 대해 모의한 결과, 1차 정도 수치해의 한계에도 불구하고, HLLL 기법의 결과는 대체로 정확해와 잘 일치하였으며 그 외의 HLL-형 기법의 그것에 비해 우수한 것으로 나타났다. 특히, 물이 빠져 바닥이 드러나는 상태에 대한 접촉 파속의 추정에서 Riemann 불변량을 이용하는 HLLC 기법에 비해 물이 빠지는 전선을 더 정확하게 포착하는 HLLL 기법의 결과는 매우 고무적이었다.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.191-215
• /
• 2009

In the real world, there exist various products in terms of price and quality, and it can be expected that a product with lower price and higher quality than others is better. Hence efficiency of consumption behaviour can be measured by the level of goodness in terms of price and quality attributes of that product. The purpose of this research is to define consumption efficiency in terms of price and quality, and to measure consumption efficiency of IT and electronic products in South Korea. From the results, many consumers have purchased inefficient products m air-conditioner, TV, digital camera, MP3 player, computer markets. On the other hand, consumers have purchase efficient products in refrigerator and washing machine markets relatively. In addition, we analyze the relationship of consumption efficiency, information channel, and electric power consumption. This research may provide meaningful information for consumer's behaviour by measuring consumption efficiency quantitatively.