• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.306-310
• /
• 1999

Electron intersubband absorption in Sb $\delta$-doped Si(110)/SiGe multiple quantum well structures is observed. Normally incident light can excite electrons in Si(110) quantum wells, which is not possible for Si(001) or GaAs quantum wells. The influence of Ge composition in SiGe barries is investigated. As the Ge composition in SiGe barriers increases, the absorption strength is decreased and the transition energy is increased. It is verifired by comparing the calculated and experimental results obtained at various incident and polarization angles that normally incident light and parallel incident light are absorbed in different processes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.87-94
• /
• 2003

In this paper, we propose an IFFT/FFT design method to minimize quantization error in IEEE 802.11a WLAN. In the proposed algorithm, the twiddle coefficient of IFFT/FFT processor is manipulated by the statistics distribution of the input data at each stage. We applies this algorithm to radix-2/$^2$ SDF architecture. Both IFFT and FFT processor shares the circuit blocks cause to the symmetric architecture. The maximum quantization error with the 10 bits length of the input and output data is 0.0021 in IFFT and FFT that has a self-loop structure with the proposed method. As a result, the proposed architecture saves 3bits for the data to keep the same resolution compared with the conventional method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.6
• /
• pp.33-41
• /
• 2014

In this paper, we propose a D flip-flop based on quantum-dot cellular automata(QCA) clocking and design a programmable quantum-dot cell(QPCA) structure using the proposed D flip-flop. Previous D flip-flops on QCA are that input should be set to an arbitrary value, and wasted output values exist because it was utilized to duplicate by clock pulse and QCA clocking. In order to eliminate these defects, we propose a D flip-flop structure using binary wire and clocking technique on QCA. QPCA structure consists of wire control logic, rule control logic, D flip-flop and XOR logic gate. In experiment, we perform the simulation of QPCA structure using QCADesigner. As the result, we confirm the efficiency of the proposed structure.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.167-171
• /
• 2014

While the development of a portable plate panel display, thinning, high color reproduction, high brightness studies have been actively performed. LED, OLED is used as a light source. The research on quantum dot is much accomplished by the material of light source. Such quantum dot is the next generation semiconductor nano fluorescent substance because quantum dot has the high color reproduction and flexible display characteristic. In this study, we presented to method of using the quantum dot for implementation of the plate panel display. Quantum Dot (CdSe/ZnS), having a 100um thickness, is spread in PET barrier film. A Blue LED having a wavelength of 455nm as a light source irradiating light to the optical characteristic of the devices produced and evaluated. Also we presented the possibility for application with the color change film of the LCD.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.67-76
• /
• 2012

Expanding services and productions for screen content videos recently, necessity of new compression techniques is emerging. The next-generation video coding standard is also considering specified coding tools for screen content videos, but it is still preliminary stage. In this paper, we investigate the characteristics of screen content videos for which we propose the quantization in spatial domain to improve coding efficiency. The proposed method directly employs quantization for residual signal without any transformations. The proposed method also applies adaptive coefficients prediction and in-loop filter for quantized residual signals in spatial domain based on the characteristics of screen content videos. As a results, the proposed method for the random access, the low-delay and the all-intra modes achieve bit-saving about 4.4%, 5.1%. and 4.9%, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.110-118
• /
• 2006

Cryptographic protocol design in a two-party setting has of tel ignored the possibility of simultaneous message transmission by each of the two parties (i.e., using a duplex channel). In particular, most protocols for two-party key exchange have been designed assuming that parties alternate sending their messages (i.e., assuming a bidirectional half-duplex channel). However, by taking advantage of the communication characteristics of the network it may be possible to design protocols with improved latency. This is the focus of the present work. We present three provably-secure protocols for two-party authenticated key exchange (AKE) which require only a single round. Our first, most efficient protocol provides key independence but not forward secrecy. Our second scheme additionally provides forward secrecy but requires some additional computation. Security of these two protocols is analyzed in the random oracle model. Our final protocol provides the same strong security guarantees as our second protocol, but is proven secure in the standard model. This scheme is only slightly less efficient (from a computational perspective) than the previous ones. Our work provides the first provably- secure one-round protocols for two-party AKE which achieve forward secrecy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.37-43
• /
• 2008

The performance and hardware complexity of LDPC decoders depend on the design parameters of quantization, the clipping threshold $c_{th}$ and the number of quantization bits q, and also on the maximum number of decoding iterations. In this paper, the BER performances of LDPC codes are evaluated according to the clipping threshold $c_{th}$ and the number of quantization bits q through the simulation studies. By comparing the quantized Min-Sum algorithm with the ideal Min-Sum algorithm, it is shown that the quantized case with $c_{th}=2.5$ and q=6 has the best performance, which approaches the idea case. The decoding complexities are calculated and the word error rates(WER) are estimated by using the pdf which is obtained through the statistical analyses on the iteration numbers. These results can be utilized to tradeoff between the decoding performance and the complexity in LDPC decoder design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.2
• /
• pp.14-26
• /
• 2002

A new model for degenerate semiconductor quantum well devices was developed. In this model, the multi-subband Boltzmann transport equation was formulated by applying the Pauli exclusion principle and coupled to the Schrodinger and Poisson equations. For the solution of the resulted nonlinear system, the finite difference method and the Newton-Raphson method was used and carrier energy distribution function was obtained for each subband. The model was applied to a Si MOSFET inversion layer. The results of the simulation showed the changes of the distribution function from Boltzmann like to Fermi-Dirac like depending on the electron density in the quantum well, which presents the appropriateness of this modeling, the effectiveness of the solution method, and the importance of the Pauli -exclusion principle according to the reduced size of semiconductor devices.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.122-127
• /
• 1997

The hexagonal wurtzite structure of CdSe quantum dots are investigated by X-ray diffraction experiment. The absorption peaks due to quantum confinement effect are observed in the linear absorption spectra. Absorption coefficient changes at the lowest transition are measured with pump wavelength at the lowest transition and at the next higher transition from which direct intraband transition is not allowed. The measured larger absorption changes at the lowest transition confirm that the selection rules of intraband transition resulting from quantum confinement effect are satisfied. From the experimental results, therefore, we concluded that the CdSe quantum dots can be described as homogeneous system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.38-38
• /
• 2001

본 논문에서는 웨이브릿 영역에서의 영역 분류와 대역간 예측 및 선택적 벡터 양자화를 이용한 다분광 화상테이타 압축 기법을 제안하였다. 이 방법에서는 각 대역을 웨이브릿 변환 후, 각 대역의 기저밴드의 대역별 특성을 이용하여 영역 분류를 행하였다. 그리고, 다른 대역과 해상도가 동일하고 공간적 분산이 작으며 분광적 상관성이 큰 기준대역 (reference channel)을 결정한 뒤, 이를 영역별 스칼라 및 분류별 가변 벡터 양자화를 행하여 부호화 하였다. 또한 기준대역과의 대역간 상관성이 큰 대역들에 대해서는 영역별 대역간 예측을 행한 후, 활동도가 높은 블록에 대해서만 선택적 벡터 양자화로 부호화를 행하였다. 이때, 활동도가 높은 블록들의 위치정보는 기준대역으로부터 얻어지는 임계치 지도 (threshold map; THMAP)를 이용하였다. 즉, 제안한 방법에서는 각 대역에 대해 웨이브릿 영역에서의 영역 분류 후 영역별 대역간 예측을 행함으로써 다분광 화상데이타에 존재하는 대역간 중복성을 제거하고 선택적 벡터 양자화를 행함으로써 대역내 중복성을 효과적으로 제거하여 압축효율을 향상시킨다. 실제 원격 센싱된 인공위성 화상데이타에 대한 실험을 통하여 제안한 기법의 부호화 효율이 기존의 기법에 비하여 우수함을 확인하였다.