• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.91-102
• /
• 2009

A traffic accident prediction model developed using various design variables(road design variables, geometric variables, and traffic environmental variables) is one of the most important factors to safety design evaluation system for roads. However, statistical accident models have a crucial problem not applicable for all intersections. To make up this problem, this study developed AMFs(Accident Modification Factors) through statistical modeling methods, historical accident databases, judgment from traffic experts, and literature review by considering design variable's characteristics, traffic accident rates, and traffic accident frequency. AMFs developed in this study include exclusive left-turn lane, exclusive right-turn lane, sight distance, and intersection angle. Predictabilities of the developed AMFs and the existing accident prediction models are compared with real accident historical data. The results showed that performances of the developed AMFs are superior to the existing statistical accident prediction models. These findings show that AMFs should be considered as a important process to develop safety design evaluation algorithms. Additionally, AMFs could be used as an index that can judge the impact of corresponding design variables on accidents in rural intersections.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.41-53
• /
• 2009

For 5 years and 6 months, ranging from January 2003 to June 2008, SPSS 12.0 Statistical Program was used to analyze the overall analysis, analysis of center line encroachment, analysis of signal violations, analysis of drinking while intoxicated, analysis of driving without license, analysis of two-wheel vehicle, analysis of pedestrian, analysis of safety equipment, analysis of traffic publicity or education and automobile registration accounts, and casualty of traffic accidents that are determined as having statistical implication based on the statistics available from the policy to take a look at traffic accident in the Daejeon area, and there were some meaningful results. With the proof that there is a certain level of ratio for the correlations between traffic control and traffic accident that the effect of traffic control has shown with certain time interval. The relationship of traffic control and the casualty of traffic accident has very low coefficient of correlations that it is not statistically noticeable that traffic control of the police has almost no effect in preventing traffic accident. This is a display of the fact that the conversion of direction for traffic safety measure undertaken to this point is rather urgent that there is a dire need of establishing the effective alternatives.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.2
• /
• pp.113-137
• /
• 2010

The international community has done a lot of effort to improve the aviation safety. The new high technologies, systems and development of navigation equipments considerably improved the level of aviation safety. However, the aviation accident rate has been showing unchanged status without the decline since 1980. It means it is difficult to secure enough safety by the existing efforts to improve the aviation safety, eventually needs new methods for the accident prevention. With this in mind, the nations interest new methods that can consider a countermeasure by realizing potential risk factors before fatal accidents. In other words, that is to analyze and share the safety information collected from accidents by establishing aviation safety information system. To establish international aviation safety information system, each country's aviation accident incident reporting systems are need to be established. Also aviation safety data taxonomy is need to be standardized. Then, aviation users will communicate the information efficiently. This study investigates and considers each country's aviation accident incident database taxonomy for the analysis of the aviation data and the necessary prevention activity. This will contribute to a better international aviation safety and strengthen the country's aviation diplomacy.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2024

Dangerous tasks that occur every day at industrial site manufacturing plants, which have recently been making rapid changes, were classified by type, and the effect of mobile circuit television (CCTV) on safety accidents among daily safety management methods was analyzed. The subject of the study is about 3,000 workers who manage the infrastructure facility sector to supply utilities such as gas, water, and electricity to the display manufacturing process located in Asan City, and the study was conducted based on the daily dangerous work from 2019 to 2022, and during this study period, many construction works such as new investment and expansion of construction and manufacturing processes were occurring at the site. As a result, the rate of safety accidents and exposure to risks are expanding, and most of the safety accidents occurred because the sectors that did not follow the basics and the safety measures on the site were not implemented. In this paper, it was confirmed that there is an accident reduction effect according to the relationship between the dangerous work classified according to the work importance and the mobile CCTV shooting rate. Considering the characteristics of the manufacturing plant site, it can be used to play the role of basic data for preventing safety accidents based on the expansion of the introduction of a new safety management culture in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.366-374
• /
• 2013

Maritime transportation circumstance is changing rapidly in accordance with the increase of cargo volume between countries and increase of marine leisure activities by improvement of quality of life. And the circumstance for ship operation is also changing due to aging of seafarers and increasing of foreign seafarers. To cope with such changes in maritime environment well, it requires higher safety management skills from shipping companies, the main subject in charge of the safety matter. In this paper, we analyzed domestic and foreign similar system, and then applied imitation strategies for introduction of an unific evaluation and management system that was consist of marine accidents, port state control, ISM Code and so on from shipping companies. We defined that the imitation industry and system are converted accident ration of construction industry and traffic safety excellence company of road transportation, and then extracted relevant law, evaluation index, incentive system as a imitation subject. We also proposed scheme that introduction of basis law, and evaluation tool with marine accidents ratio, port state control & ism code result, and incentives such as immunity of safety inspection or reduction of commission for introduction of company's safety management level evaluation system. Finally, we proposed the imitation timing and plan in stages for system's sustainable development through the prompt introduction and continuous enforcement.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.17-33
• /
• 2004

Korea's economic development plans instituted in the 1970's, affected by the growth centered policy and rapid industrialization, have prevailed without having aviation safety management system, along with the safety of the other various means of transportation, settled in its place, and subsequently, the aviation accidents occurred until the beginning of year 2000 have incurred an enormous social expense, not to say of a massive loss of human lives. Especially, with regard to the causal factors of accidents, most of recent accidents have been associated with human factor of airmen, thus, only if this can be detected in advance and prevented, the aircraft accident rate will be reduced by a large margin. Therefore, in order to develope improvement methods on the safety system of civil aviation, in this study, safety management system has been divided into three stages: an advance preventive system, a handling system at an accident's occurrence and a post accident handling system, and thereby improvement methods on aviation safety have been suggested for each stage. The threatening factors agatinst aviation safety have been found to be the absence of management standards and regulations, the indifference to or the lack of the law abiding apirit as major factors, and in order to improve on which, it is required that the settlement of the institutional safety management system should precede, and that the Government and the aviation industry should also make a continuous effort to identify the threatening factors against aviation safety, and to provide incentives for the law abiding spirit and the attitude of giving top priority to safety to spread among all the employees.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.750-754
• /
• 2014

Quantitative risk analysis has been performed for a pervaporation process for production of high test peroxide. Potential main accidents are explosion and fire caused by a decomposition reaction. As the target process has a laboratory scale, the consequence is considered to belong to Category 3. An event tree has been developed as a model for occurrence of a decomposition reaction in the target process. The probability functions of the accident causes have been established based on the frequency data of similar events. Using the constructed model, the failure rate has been calculated. The result indicates that additional safety devices are required in order to achieve an acceptable risk level, i.e. an accident frequency less than $10^{-4}/yr$. Therefore, a layer of protection analysis has been applied. As a result, it is suggested to introduce inherently safer design to avoid catalytic reaction, a safety instrumented function to prevent overheating, and a relief system that prevents explosion even if a decomposition reaction occurs. The proposed method is expected to contribute to developing safety management systems for various chemical processes including concentration of hydrogen peroxide.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.815-820
• /
• 2013

With the development of technology, there has been a considerable increase in the number of skyscrapers in the world. Accordingly, there are increasing requirements with regard to maintenance, such as cleaning, painting, and inspection. However, it is extremely dangerous to work on the walls of buildings, and falls from buildings have accounted for a large proportion of construction accidents. In particular, as the number of buildings with irregular shapes increases, the accident rate during maintenance work has increased each year, with most accidents leading to deaths. An alternative solution must be developed with the commercialization of automatic systems. In this study, fundamental research has been conducted for drafting and commercializing an automation tool with a built-in guide system that can perform cleaning.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.533-535
• /
• 2018

In the 21st century, in which the accident rate is rapidly increasing in proportion to the development of automobiles, In order to reduce the number of accidents, this paper was written for the convenience of the elderly people with disabilities and the handicapped. When a driver's safety accidents and various signals are transmitted through a smart phone by voice, the voice signal is processed as a video signal through the rear LED pannel of the vehicle, so that an urgent situation or a current state can be clarified It is also possible to use the local area network as a billboard and I would like to propose a study to show the advertising effect and current traffic situation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.67-76
• /
• 2002

At a recent, with an increase of traffic demand and a spread of automobile culture, the safety, convenience and speed of highway is required. On this study, using the real time kinematic GPS, observation value at a center line of ready-built road is obtained and then design specification of highway, IP, IA and R are obtained by least square method. Using those IP, IA and R, we analysed the risk factor of highway alignment by the standard for structure and facility of the road. With using RTK GPS, we could analyse dangerous element of highway alignment rapidly and cope with dangerous area of the existing road. It is also proved to apply availably whether we determine alignment improvement is needed or not or analyze source of accident related with alignment in the region having a high traffic accident rate.