• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.422.2-422.2
• /
• 2014

가스장 이온원(GFIS: Gas Field Ionization Source)은 전자현미경보다 분해능이 향상된 이온현미경의 광원으로 사용하기 위하여 연구되고 있고, 큰 각전류 밀도, 작은 크기의 가상 이온원 그리고 좁은 에너지 퍼짐을 특징으로 한다. 여러 가지 장점을 가지고 있는 GFIS을 개발하기 위해서는 GFIS에서 발생된 이온빔의 형상을 관찰 것이 매우 중요하며, 이러한 관찰을 위한 시스템에는 주로 마이크로 채널 플레이트 (MCP: Micro Channel Plate)가 사용된다. MCP는 채널내부에 입사한 입자의 에너지에 의해서 생성된 이차전자를 수 천 배에서 수 백 만 배 이상 증폭시켜 형광판에 조사하고 발광시키는 방법으로 작은 신호를 영상으로 관찰 할 수 있도록 한다. MCP의 큰 증폭비는 작은 크기의 신호를 큰 신호로 증폭하여 관찰하는데 용이하여, GFIS 방법으로 생성된 이온빔(이온빔 전류 값은 pA 수준)을 관찰하기에 적합하다. 그러나 MCP를 이용하여도 증폭된 이온빔의 세기가 매우 작기때문에 생성된 이온빔 형상을 정확하게 관찰하기 위해서는 MCP의 형광판을 촬영하는 카메라 노출시간을 길게하여 데이터 수집 시간을 늘려야 하는 문제가 있다. 본 발표에서는 이온빔 형상 관찰에 소요되는 시간을 단축하기 위하여 MCP의 잡음이 GFIS의 이온빔 이미지 관찰에 미치는 영향을 분석하고 이를 제거 방법을 소개한다. 본 연구에서는 GFIS 방출 이온빔의 이미지에 포함된 MCP 잡음 특성을 장(전계)이온현미경 (Field Ion Microscope)실험을 통하여 분석하였고, 디지털 이미지 처리 방법을 이용하여 방출 이온빔 이미지에서 MCP 잡음을 제거하여 방출 이온빔 이미지만 추출할 수 있었다. 본 연구에서 제안한 방법을 GFIS 방출 이온빔 관찰시스템에 적용함으로써 기존 방법에 비해 노출시간을 단축하여 방출 이온빔을 관찰 할 수 있었으며, 노이즈 제거 효과로 향상된 이온빔 형상을 얻을 수 있었다. 본 연구결과의 관찰시간 단축과 향상된 이온빔 형상 획득은 이온현미경 개발에 필수적인 단원자 이온빔을 보다 효율적으로 개발할 수 있으며 디지털 이미지 처리로 GFIS 이온빔 생성을 자동화하는데 응용할 수 있다. 더불어 기존방법에 비해 이미지 획득을 위한 MCP의 노출시간을 단축할 수 있으므로 실험장비 수명 단축 방지 및 관리에 큰 장점이 있다.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2002

Localized muscle fatigue can be identified by a downward shift of the EMG frequency typically represented by a fall in the median frequency The Present experimental study was Performed to investigate the time change of the median frequency and the muscle torque during maximal isometric back extension exercises at different exercise angles (0$^{\circ}$, 12$^{\circ}$, 36$^{\circ}$and 72$^{\circ}$) Twenty heath subjects (mean age : 24.35 $\pm$ 2.70) were Participated in this study Median frequency was extracted from EMG signals by employing the fast Fourier transform. Initial median frequency and the slope of median frequency was not significantly correlated with the muscle torque. Pearson's Product moment correlation was used to quantify the relationship between slopes of median frequency and torque. The results may suggest that the exorcise angle during maximal isometric back extension exercises does not affect the slopes of the median frequency and torque, and y-intercept of the median frequency among exercise angles There was no significant correlation between slopes of median frequency and torque. But there was a moderate correlation between median frequency and torque at each exercise angle. In conclusion, the exercise angle during maximal isometric back extension exercise is not a direct effect on slopes of median frequency and torque. But results showed that the shift of median frequency and torque shift were highly correlated in all subjects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1807-1811
• /
• 2009

홍수기 유량측정에 있어서 가장 큰 어려움이었던 유속측정의 정확성을 확보하고 실무자의 안전성을 보장하기 위한 기본 취지에서 1993년 시작된 "대하천 유량 자동측정 설비개발"이라는 연구 주제하에 비접촉식 유속측정 기법에 대한 연구를 수년간 연구개발을 거듭한 결과물인 전자파표면유속계를 1999년도에 상품화하여 현재 국내에서 홍수유속측정 설비로 이용되어지고 있다. 현장에서 유량측정업무에 종사하는 실무자들은 홍수유량측정에 비하여 훨씬 간편함을 몸소 느끼게 되었고, 상품화보급이 시작된지 수년이 지난 상태에서는 더욱 성능이 개선된 전자파표면유속계가 개발되기를 기대하였다. 무엇보다도 홍수기에 유량측정시 기존의 유속측정 방법과 같은 방식으로 각 측선마다 전자파표면유속계를 설치해야하는 번거로움을 피력하였다. 기존의 전자파표면유속계는 하천을 가로지르는 교량위에서 흐름방향에 나란히 측정하는 조건을 고려하였기 때문에 이와 같은 편각인 상태의 유속측정은 검토하지 않았다. 이와 같은 사용자의 요구에 대하여 한국수자원공사에서는 홍수기 유량측정시의 사용자 편의성을 증대하기 위하여 성능개선 작업에 착수하여 편각측정용 전자파표면유속계를 개발하였다. 편각측정의 주된 목적은 전자파표면유속계를 모든 측선에 설치하지 않고 한 지점에서 편각(oblique angle)으로 여러 측선의 유속을 측정함으로써 유속측정의 효율성을 증대시키는 것이다. 전자파표면 유속계에서의 편각 측정은 하천의 유속 방향을 기준으로 정면에서 측정하면 수평 편각이 0도가 되며 좌우로 안테나를 회전하여 움직인 각도가 측정 편각으로 결정된다. 전자파의 물리적 특성 때문에 편각이 증가하면 반사된 신호의 수신 크기가 감소하여 측정이 불가능하게 된다. 이러한 문제를 최대한 극복하는 것이 본 연구의 중점 개선사항이다. 이를 통하여 전자파표면유속계를 교량의 임의 지점에 설치하여 좌우로 편각 $20^{\circ}$에 이르는 범위의 유속을 측정하고자 목표로 하였다. 홍수시의 현장 측정 환경은 열악하기 때문에 정확한 측정을 조건으로 측정자에게 최대한의 편리함과 신속한 측정 환경을 제공해야 효과적인 업무수행이 가능하다. 이러한 편각 측정을 가능토록 하기 위해서는 유속측정시 송신되는 전자파의 출력을 기존의 시스템보다 보다 높게 발사하여야 하며 안테나의 수신감도 및 지향성이 개선되어야 한다. 이를 위해서 안테나 형태에 있어 기존 전자파표면유속계와의 차이점은 기존안테나는 파라볼릭 형상이었으나 신규 제작된 안테나는 평면안테나로 이러한 형태의 개선를 통해 안테나 특성 및 구조적인 차이를 유도하였다. 두 가지 안테나 사양 각각 장단점이 있으나 가장 큰 차이점은 빔폭 특성에서 평면 안테나가 우수하며 수신 감도를 향상시킬 수 있다는 강점이 있다. 특히 Tx/Rx 분리의 평면안테나 구조는 파라볼릭 안테나에서 불가능한 기능으로서 편각측정으로 인한 수신감도의 저하의 문제를 해결하기 위한 개선조치이었다. 성능개선 제작된 편각측정용 전자파표면유속계를 이용하여 일반하천의 홍수유속에 대한 편각측정 실험을 안성천에서 실시한 결과 유속 약 1.7 m/s 인 상황에서 편각 $20\;^{\circ}$ 까지 편각 $0\;^{\circ}$일때와 유사한 측정 성능을 보였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.36-44
• /
• 2007

This paper presented a hybrid ternary encoding scheme using 3-valued logic. It can adapt to the delay-insensitive(DI) model. We designed an asynchronous wrapper for the hybrid ternary encoding scheme to communicate with various asynchronous encoding schemes. It reduced about 50% of transmission lines and power consumption compared with the conventional 1-of-4 and ternary encoding scheme. The proposed wrappers were designed and simulated using the $0.18-{\mu}m$ standard CMOS technology. As a result, the asynchronous wrapper operated over 2 GHz communicating with a system bus. Moreover, the power dissipation of the system bus adapted the hybrid ternary encoding logic decreases 65%, 43%, and 36% of the dual-rail, 1-of-4, and ternary encoding scheme, respectively. The proposed data encoding scheme and the wrapper circuit can be useful for asynchronous high-speed and low-power asynchronous interface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1050-1058
• /
• 2005

This paper presents how to design and implement a very compact, cost effective and broad band receiver module for IEEE 802.16 FWA(Fixed Wireless Access) in the 40 GHz band. The presented receiver module is fabricated in a multi-layer LTCC(Low Temperature Cofired Ceramic) technology with cavity process to achieve excellent electrical performances. The receiver consists of two MMICs, low noise amplifier and sub-harmonic mixer, an embedded image rejection filter and an IF amplifier. CB-CPW, stripline, several bond wires and various transitions to connect each element are optimally designed to keep transmission loss low and module compact in size. The LTCC is composed of 6 layers of Dupont DP-943 with relative permittivity of 7.1. The thickness of each layer is 100 um. The implemented module is $20{\times}7.5{\times}1.5\;mm^3$ in size and shows an overall noise figure of 4.8 dB, an overall down conversion gain of 19.83 dB, input P1 dB of -22.8 dBm and image rejection value of 36.6 dBc. Furthermore, experimental results demonstrate that the receiver module is suitable for detection of Digital TV signal transmitted after up-conversion of $560\~590\;MHz$ band to 40 GHz.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.72-80
• /
• 2010

The 1Gbps clock and data recovery (CDR) circuit using the proposed multi-point phase detector (PD) is presented. The proposed phase detector generates up/down signals comparing 3-point that is data transition point and clock rising/falling edge. The conventional PD uses the pulse width modulation (PWM) that controls the voltage controlled oscillator (VCO) using the width of a pulse period's multiple. However, the proposed PD uses the pulse number modulation (PNM) that regulates the VCO with the number of half clock cycle pulse. Therefore the proposed PD can controls VCO preciously and reduces the jitter. The CDR circuit is tested using 1Gbps $2^{31}-1$ pseudo random bit sequence (PRBS) input data. The designed CDR circuit shows that is capable of recovering clock and data at rates of 1Gbps. The recovered clock jitter is 7.36ps at 1GHz and the total power consumption is about 12mW. The proposed circuit is implemented using a 0.18um CMOS process under 1.8V supply.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.103-118
• /
• 1999

This paper analyzes the performance of symbol timing recovery and equalizer in 8VSB digital terrestrial TV receiver under various multipath signals and proposes equalization techniques which improve indoor reception performance. Data segment sync is used for symbol timing recovery and timing offset is measured for echoes of various delays and amplitudes by using symbol timing detection filter whose pattern is +1. +1. -1. and -1. Measured timing offsets were below 10% for long echoes with more than 5 symbol delay and above 30% for short echoes with around 1 symbol delay. Indoor reception is always more challenging than outdoor reception due to lower signal strength. large and short multipaths. and moving interfering objects. So it is considered to use FSE (Fractionally Spaced Equalizer) which is very robust to timing offset and blind equalizer which can update equalizer tap coefficients even by information data. We compare the performance of conventional DFE (Decision Feedback Equalizer) and FSE-DFE using LMS algorithm and Stop and Go algorithm for the indoor reception. Experiments reveals FSE has excellent performance for large timing offset and Stop and Go algorithm shows good performance for Doppler shift. so we propose to use FSE-DFE structure with Stop and Go algorithm for the reliable indoor reception.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.572-577
• /
• 2009

Large corpus-based concatenating Text-to-Speech (TTS) systems can generate natural synthetic speech without additional signal processing. To prune the redundant speech segments in a large speech segment DB, we can utilize a decision-tree based triphone clustering algorithm widely used in speech recognition area. But, the conventional methods have problems in representing the acoustic transitional characteristics of the phones and in applying context questions with hierarchic priority. In this paper, we propose a new clustering algorithm to downsize the speech DB. Firstly, three 13th order MFCC vectors from first, medial, and final frame of a phone are combined into a 39 dimensional vector to represent the transitional characteristics of a phone. And then the hierarchically grouped three question sets are used to construct the triphone trees. For the performance test, we used DTW algorithm to calculate the acoustic similarity between the target triphone and the triphone from the tree search result. Experimental results show that the proposed method can reduce the size of speech DB by 23% and select better phones with higher acoustic similarity. Therefore the proposed method can be applied to make a small sized TTS.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.47-53
• /
• 2015

Quantitative analysis of MR spectrum depending on mole concentration of the contrast media in cereberal metabolite phantom was performed. PRESS pulse sequence was used to obtain MR spectrum at 3.0T MRI system (Archieva, Philips Healthcare, Best, Netherland), and the phantom contains brain metabolites such as N-Acetyl Asparatate (NAA), Choline (Cho), Creatine (Cr) and Lactate (Lac). In this study, optimization of MRS PRESS pulse sequency depending on the concentration of contrast media (0, 0.1 and $0.3mmol/{\ell}$) was evaluated for various repetition time(TR; 1500, 1700 and 2000 ms). In control (cotrast-media-free) group, NAA and Cho signals were the highest at TR 2000 ms than at 1700 and 1500 ms. Cr had the highest peak signal at TR 1500 ms. When concentration of contrast media was $0.1mmol/{\ell}$, the metabolites were increased NAA 73%, Cho 249%, Cr 37% at TR 1700 ms compared with other TR, and also signal increased at $0.3mmol/{\ell}$, In $0.5mmol/{\ell}$ of contrast agent, cerebral metabolite peaks reduced, especially when TR 1500 ms and 2000 ms they decreased below those of control group. The ratio of metabolite peaks such as NAA/Cr and Cho/Cr decreased as the concentration of the contrast agent increased from 0.1 to $0.5mmol/{\ell}$. Authors found that the optimization of PRESS sequence for 0.3T MRS was as follows: low density of contrast agent ($0.1mmol/{\ell}$ and $0.3mmol/{\ell}$) made the highest signal intensity, while high density of contrast agent reveals the least reduction of signal intensity at 1700 ms. In conclusion, authors believe that it is helpful to reduce TR for acquiring maximum signal intensity.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.93-101
• /
• 2001

In this paper, we propose an image downscaler used in multimedia video applications, such as DTV, TV-PIP, PC-video, camcorder, videophone and so on. The proposed image downscaler provides a scaled image of high-quality and high-performance. This paper will explain the scaling theory using two-dimensional digital filters. It is the method that removes an aliasing noise and decreases the hardware complexity, compared with Pixel-drop and Upsamling. Also, this paper will prove it improves scaling precisians and decreases the loss of data, compared with the Scaler32, the Bt829 of Brooktree, and the SAA7114H of Philips. The proposed downscaler consists of the following four blocks: line memory, vertical scaler, horizontal scaler, and FIFO memory. In order to reduce the hardware complexity, the using digital filters are implemented by the multiplexer-adder type scheme and their all the coefficients can be simply implemented by using shifters and adders. It also decreases the loss of high frequency data because it provides the wider BW of 6MHz as adding the compensation filter. The proposed downscaler is modeled by using the Verilog-HDL and the model is verified by using the Cadence simulator. After the verification is done, the model is synthesized into gates by using the Synopsys. The synthesized downscaler is Placed and routed by the Mentor with the IDEC-C632 0.65${\mu}{\textrm}{m}$ library for further IC implementation. The IC master is fixed in size by 4,500${\mu}{\textrm}{m}$$\times$4,500${\mu}{\textrm}{m}$. The active layout size of the proposed downscaler is 2,528${\mu}{\textrm}{m}$$\times$3,237${\mu}{\textrm}{m}$.