• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.110-117
• /
• 2003

The operational characteristics of the landing gear retraction/extension depend on the complexity of design variables operational/environmental conditions. In order to meet the requirements of minimum stow area and performance, the integration of the landing gear system requires operational kinematic and dynamic analysis considering an effect of its related system. This study investigates operational dynamic behaviors of the T-50 landing gear system using ADAMS. Taking into account for various operational/environmental conditions, an analysis of dynamic behavior on the landing gear operational characteristics is performed with experience derived from a wide range of proprietary designs. Analytical results are presented for discussing the effects of temperature, aerodynamic and maneuver load on normal/emergency operation of the landing gears and doors. This analysis leads us to the conclusion that the proposed program is shown to be a better quantitative one that apply to a new development and troubleshooting of the landing gear system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.1-11
• /
• 1999

Thermal behavior of spacecraft propulsion system utilizing monopropellant hydrazine ($N_2$$H_4$) is addressed in this paper. Thermal control performance to prevent propellant freezing in spacecraft-operational orbit was test-verified under simulated on-orbit environment. The on-orbit environment was thermally achieved in space-simulation chamber and by the absorbed-heat flux method that implements an artificial heating through to the spacecraft bus panels enclosing the propulsion system. Test results obtained in terms of temperature history of propulsion components are presented and reduced into duty cycles of the avionics heaters which are dedicated to thermal control of those components. The duty cycles are subsequently converted into the electrical power required in the operational orbit. Additionally, cyclic temperature of each component, which was made under thermal-balanced condition of spacecraft, is compared to the acceptable design range and justified from the viewpoint of system verification.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.344-347
• /
• 2011

This paper presents qualification process of the T700/701K turbo-shaft engine for Korean Utility Helicopter(KUH). The T700/701K is the rear-drive variant of the GE's T700-701C/D engine which was qualified for military applications in the world. The main scope of the development is the modification from a front-drive engine to a rear-drive one, the performance enhancement of the power turbine and the incorporation of two channel FADEC(Full Authority Digital Engine Control) system for more reliable operation. Therefore, T700/701K engine must be qualified by Korean government in order to perform a flight in the country. Reflecting the influence of developing scope, the main requirements including performance and control are verified by test and analysis, while the requirement for module or component that is same to that of T700-701C/D are verified by similarity.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.131-136
• /
• 2015

In this paper, prior to the flight model X-band dual-mode circular cavity filter required for the high power transmission of the observation payload in the geostationary satellite, the development model are designed and analyzed to show the analytical multipactor requirement margin. First of all, the multipaction breakdown power sensitivities were analyzed by changing the iris width and thickness within the filter, and through that the iris width and thickness was selected and then the multipaction threshold powers over the frequencies within the bandwidth were analyzed and the required margin of 8 dB was obtained. Also for the high power transmission filter, another important phenomena known as corona breakdown are analyzed for the iris width and thickness changes. Finally the development model manufactured was tested and the results met the key requirements.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.121-131
• /
• 1999

Automatic Rudder Trim System(ARTS) is a device to reduce the pilot's work load for rudder trimming greatly required in varying abruptly aircraft's engine power. This paper represents a technical analysis and a design of control law of the ARTS. The control law of the ARTS is designed based on the analysis of aircraft's characteristics, system's requirements, and limitations. The control law is comprised of open loop control using the rudder trim map for a specific aircraft and closed loop control to compensate the error of the open loop control system. flight test results show that the ARTS can reduce pilot's work load for rudder trimming dramatically and can compensate the aircraft's transient yaw motion.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.585-592
• /
• 2017

Recently, as the air traffic volume has been explosively increased, various studies are being conducted to increase the air passenger capacity. In order to compensate the limitation of the separation distance on the aerodrome established on the basis of existing VOR / DME equipment, GNSS utilizing satellite is considered. In addition, we are trying to obtain more precise location information by using SBAS, a system that can correct GNSS error. ICAO recommends introducing SBAS until 2025, and Korea has also started to develop KASS, a Korean SBAS since 2014. Therefore, in this paper, we analyze the interference threshold for the measurement items and the receiving antenna gain according to the elevation angle of the satellite receiving antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1169-1175
• /
• 1993

Plasma spraying method was used to fabricated the microwave absorbing ferrite-silicon carbide on the aluminum-alloy of the fuselage of an aircraft to protect it from RADAR detection. In this paper 15[rm] instead of 34[rm], the mean size of SIC-powder for ferrite-silicon carbide surface films(I) was used. 50(Kg/h) Instead of 70(Kg/h), the powder feed and 100[mm] Instead of 80(mm), spray distance of spray parameters was used. This M/W absorbers were designed experimentally and fabricated trially, as a result of which the relative frequency bandwidth of 2.8% were obtained under the tolerance limits of the reflection coefficients lower than-10[dB], and the maximum absorption thickness becomes 0.5[mm], which is much thinner than that of the conventional ones.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.25-33
• /
• 2015

Global market of unmanned aircraft(UA) is rapidly expending based on the versatile and efficient utility of the UA. Domestically many industries, universities and research institutes are trying to do research and development of the UA in various angle of aspect. In spite of these effort, all the participants of research and development of the UA has been suffering the difficulty of acquiring the airspace around vicinity of Goheung airfield for the flight test of UA. Although the current procedure of execution of the flight test of UA is set after acquiring the airspace by applying the NOTAM(Notice To Air Man) to the Ministry of Land, Infrastructure and Transport(MLIT) at least 7 days before the flight test and commencing with the publication of the NOTAM by MLIT, if the flight test is carried out as planned, changing or reapplying the NOTAM expends mort time and makes difficulty often. Therefore it is needed that a restricted airspace for the flight test of UA is established and make all the executioner of flight test uses the exclusive airspace without limitation. This research proposes the restricted airspace with short term and long term establish requirement of airspace separately. The short term requirement has been established with the airspace of 10 nm radius and 8,000 ft altitude in which the requirements of flight test can be carried out more than 90% without needs of supplement of the additional airspace. The long term has been established within the airspace of 30 nm radius which is the maximum Radio Line Of Sight(RLOS) and 8,000 ft altitude with exclusion of current air way, airport control area, approaching corridor to the airport, existing restricted area(RA) and Military Operating Area(MOA) for the purpose of minimizing inconvenience of the other airspace user. Once establishing the exclusive airspace for the flight test of UA, research and development of industries, universities and research institutes will be more vigorous and contributes to the national economy.

• The Korean Journal of Applied Statistics
• /
• v.27 no.7
• /
• pp.1077-1095
• /
• 2014

Unlike randomized trial, statistical strategies for inferring the unbiased causal relationship are required in the observational studies. Recently, new methods for the causal inference in the observational studies have been proposed such as the matching with the propensity score or the inverse probability treatment weighting. They have focused on how to control the confounders and how to evaluate the effect of the treatment on the result variable. However, these conventional methods are valid only when the treatment variable is categorical and both of the treatment and the result variables are directly observable. Research on the causal inference can be challenging in part because it may not be possible to directly observe the treatment and/or the result variable. To address this difficulty, we propose a method for estimating the average causal effect when both of the treatment and the result variables are latent. The latent class analysis has been applied to calculate the propensity score for the latent treatment variable in order to estimate the causal effect on the latent result variable. In this work, we investigate the causal effect of adolescents delinquency on their substance use using data from the 'National Longitudinal Study of Adolescent Health'.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.263-267
• /
• 2008

In this work the realistic install performance analysis of a helicopter was performed together with power extraction enabling to operate auxiliary system as well as intake pressure loss, loss due to bleed air, etc. which must be considered in practical propulsion system's performance modelling to be installed to the airframe. The pressure loss occurring in intake was estimated from the intake performance map with relationships of Mach Number and pressure loss. In order to evaluate the proposed installed performance model, the experimental data for comparison must be needed when mounted in propulsion system. However because of lack of accessibility to such real data at the moment, the alternative way was made through comparison that the analysis results by the proposed model were compared with a wellknown commercial program GASTURB's analysis results. The validity of the proposed installed performance model was consequently confirmed because its average deferences from the GASTURB's results were within 0.5%.