• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.34-45
• /
• 2007

Digital decimation filter is inevitable in oversampled sigma-delta A/D converters for the sake of reducing the oversampled rate to Nyquist rate. This paper presented a Verilog-HDL design and implementation of an area-efficient digital decimation filter that provides time-to-market advantage for sigma-delta analog-to-digital converters. The digital decimation filter consists of CIC(cascaded integrator-comb) filter and two cascaded half-band FIR filters. A CSD(canonical signed digit) representation of filter coefficients is used to minimize area and reduce in hardware complexity of multiplication arithmetic. Coefficient multiplications are implemented by using shifters and adders. This three-stage decimation filter is fabricated in $0.25-{\mu}m$ CMOS technology and incorporates $1.36mm^2$ of active area, shows 4.4 mW power consumption at clock rate of 2.8224 MHz. Measured results show that this digital decimation filter is suitable for digital audio decimation filters.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.950-953
• /
• 2003

In this paper, sigma-delta A/D converter for ADSL modems using oversampling technique is designed. Conventionally, the oversampling A/D converter is consist of opamps, switched capacitors, quantizers, infernal D/A converters, and decimation filters. 3-bit flash A/D converter, 3-bit thermometer-based D/A converters, and sub-blocks are used for high speed operation. HSPICE simulator and CADENCE tool are used for verification and layout of the designed modulator. The internal A/D converter and D/A converters are operated at 130 MHz. In design of decimation filter Matlab is used for calculating coefficients and ModelSim and VHDL are used for design.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.514-517
• /
• 2018

In sensor systems, ADC (analog-to-digital converter) demands high resolution, low power consumption, and high signal bandwidth. Sigma-delta ADC achieves high resolution by high order structure and high over-sampling ratio, but it suffers from high power consumption and low signal bandwidth. SAR (successive-approximation-register) ADC achieves low power consumption, but there is a limitation to achieve high resolution due to process mismatch. This paper surveys architecture improvement of ADC to overcome these problems.

• Journal of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.95-104
• /
• 1973

Ground electronic structures and SNreactivities of a series of alkylchlorides (methyl,ethyl, iso-propyl, trans n-butyl, sec-butyl, tert-butylchloride) have been studied using approximate $({\sigma}-MO)$ method, such as EHT and CNDO/2. It was found that CNDO/2 gives better results for the systems such as alkylchlorides whose structural differences are not remarkable, in comparison with EHT method. According to CNDO/2 results, calculated dipole moments for alkylchlorides are slightly higher than observed values, showing the order of primary < secondary < tertiary alkylchlorides. It was also found that highest occupied(HO) MO's are completely or nearly degenerate, and show relatively weak $\pi$-antibonding nature between$\alpha$-carbon and Cl atoms. Furthermore, the electrons in this MO are largely confined to Cl atom, and hence these behaves as likely as p-lone pair electrons of Cl atom. On the contrary, lowest unoccupied (LU) MO's show strong $\sigma$-antibonding nature between $\alpha$-carbon and Cl atoms whose electron clouds are directed along the C-Cl axis. It has been discussed that the$S_N2$ reactivities of alkylchlorides may largely be controlled by ${\sigma}^{\ast}$ LUMO, and the antibonding strength between $\alpha$-carbon and Cl atoms in this MO may become the measure of $S_N2$reactivity. The relationship between $S_N2$reactivity and C-Cl bond polarizability has also been discussed. It has been suggested that the unique structure factors determining $S_N1$reactivities may be $\pi$-antibonding strength between $\alpha$-carbon and Cl atoms in HOMO and C-Cl bond strength in ground state.

• The Inventors News
• /
• no.54
• /
• pp.1-16
• /
• 2007

한국여성경제단체연합, 여성경제계 위해 공식 출범/발행인 칼럼/'마드리드 출원제도' 적극 활용 상표 침해 줄여라/일본 특허출원 심사기간 단축된다/기업.연구소 신입사원75%, 특허 관련 지식 전무/'주몽'이계인 씨 산자부 홍보대사 위촉/특허등록세, 신청 다음날 내도 된다/특허청, 6시그마 공공부문 혁신 주도/아듀 2006 한국여성발명협회 결산/자문위원 칼럼/로봇시장에도 브랜드 선점 열풍/농산물도 발명특허 상표 등록 시대/도소매업도 서비스업으로 출원 가능/기름대신 물 사용한 자동차, 항공기 현실화/반도체 배선 기술 특허 출원 상승세/자동차는 모바일 엔터네이너/'적외선 감지기술' 우리 생활속으로/서울반도체.바론테크, 일본 특허분쟁 승소/하나TV, 특허권 침해 피소/삼성전자, 분쟁.경쟁 대응위해 특허조직 통합/신한다이아몬드 일본 MDI 특허분쟁 승소/미니인터뷰/나노기술 응용한 디스플레이 특허출원 급증/미국의 두 배인 '휴면 특허', 대책 마련 시급/특허법원 "사용횟수 적다고 상표취소 못해"/종자번식 유전자 변형식물도 특허출원 가능/변리사 1차 시험 합격자 대폭 축소/역사 속의 발명품/하루 10분 발명교실/특허Q&A/신년인터뷰/화장하는 방법도 특허 받는다/'취업에서 결혼까지' 올인원 시스템 화제/아이디어 착상 및 발명 기법/아줌마의 힘이 발휘될 때까지 발명 또 발명/버뱅크의 식물 품종 개량/미국 청년, 몸짱 선탠용 티셔츠 발명/스위스, 국가경쟁력 1위의 비밀/저지방식,'유방암' 제발 위험 감소/서울대, 세계최초 암캐 복제 성공/국가 R&D 특허조사, 전체 R&D 부처로 확대/전국 초.중생 발명 글짓기.만화현상 공모전/특허청, 공공부문 성과주의 대통령상/한국여성발명협회 회원사 발명품 가이드

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.468-474
• /
• 2011

Reducing agent was used as process variable for Pt catalyst production process. By using six sigma the optimum operating variables condition for particle size and ICP yield were deduced. With the help of fractional factorial design the major variables were reduction temperature and process time. Also, the optimum number of reduction process, reduction temperature, quantity of reducing agent and process time were 1, $67-88^{\circ}C$, 0.5 ml and 10minutes, respectively.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.639-654
• /
• 2012

최근 글로벌 경쟁이 치열해 지면서 가격경쟁력이 뒷받침되지 않으면 신흥 시장에 대한 대응이 어려워져 가격경쟁력의 중요성이 부각되고 있으며, 구조적인 비용 상승 추세로 기업의 원가 압력이 증대되고 있고, 이러한 변화된 경쟁 환경에서 생존하기 위해서는 전체적인 생산성 향상이 필수이다. 가격경쟁력 강화 및 원가압박을 해소하고 품질, 가격, 납기 전반에 모방할 수 없는 차별화된 경쟁력의 확보는 생산성 향상을 통해서 실현할 수 있고, 생산성 향상을 통한 경쟁력 있는 기업 육성은 우리 제조업을 발전시키는 토대(infra structure)이며, 기반 시설의 확충이다. 본 연구에서는 현재 외국의 혁신방법을 우리산업 현실에 대한 고려 없이 단순 도입으로 국내 실정에 맞지 않아 상당한 시행착오를 격고 있으며, 국내에 벤치마킹 할만한 제조혁신 방법론이 거의 없고, 벤치마킹하려고 해도 기업의 영업비밀이라 배우기도 쉽지 않은 상황에서 우리산업 현실에 맞는, 중소 중견기업의 맞춤형 생산성 혁신 지원도구로 중소기업의 자생적인 혁신을 위해 중소기업의 수준에 맞는 제조혁신 방법을 국내외 제조혁신 전문가로 컨소기엄을 구성하여 한국생산성본부에서 개발된 한국형제조혁신 방법론을 제조기업에 적용하여 성공적인 결과를 다른 기업에 적용 할 수 있도록 하는데 목적을 둔다. 연구목적을 달성하기 위해 문헌연구를 통해 일본의 TPS(Toyota Production System), 미국의 Lean 시스템 및 6시그마 시스템에 대하여 살펴보았고, 한국형 제조혁신 모델인 KPS(korea production system)를 통신장비 제조회사인 M. 사에 적용하여 실증하였으며, 그 결과 우수한 성과를 보임을 확인할 수 있었다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.39-47
• /
• 1998

A fourth-order $\Sigma$-$\Delta$ modulator is designed and implemented in 0.6 $\mu\textrm{m}$ CMOS technology. The modulator is verified by introducing nonlinear factors such as DC gain and slew rate in system model that determines the transfer function in S-domain and in time-domain. Dynamic range is more than 110 dB and the peak SM is 102.6 dB at a clock rate of 2.8224 MHz for voiceband signal. The structure of a ∑-$\Delta$ modulator is a modified fourth-order ∑-$\Delta$ modulator using direct feedback loop method, which improves performance and consumes less power. The transmission zero for noise is located in the first-second integrator loop, which reduces entire size of capacitors, reduces the active area of the chip, improves the performance, and reduces power dissipation. The system is stable because the output variation with respect to unit time is small compared with that of the third integrator. It is easy to implement because the size of the capacitor in the first integrator, and the size of the third integrator is small because we use the noise reduction technique. This paper represents a new design method by modeling that conceptually decides transfer function in S-domain and in Z-domain, determines the cutoff frequency of signal, maximizes signal power in each integrator, and decides optimal transmission-zero frequency for noise. The active area of the prototype chip is 5.25$\textrm{mm}^2$, and it dissipates 10 mW of power from a 5V supply.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.149-159
• /
• 2019

Six sigma is an innovative management movement which provides improved business process by adapting the paradigm and the trend of market and customers. Suitable selection of six sigma project could highly reduce the costs, improve the quality, and enhance the customer satisfaction. There are existing studies on the selection of Six Sigma projects, but few studies have been conducted to select the correct project under an incomplete information environment. The purpose of this study is to propose the application of integrated MCDM techniques for correct project selection under incomplete information. The project selection process of six sigma involves four steps as follows: 1) determination of project selection criteria 2) calculation of relative importance of team member's competencies 3) assessment with project preference scale 4) finalization of ranking the projects. This study proposes the combination methods by applying group fuzzy Analytical Hierarchy Process (AHP), an easy defuzzified number of Trapezoidal Fuzzy Number (TrFN) and Grey Relational Analysis (GRA). Both of the weight of project selection criteria and the relative importance of team member's competencies can be evaluated by group fuzzy AHP. Project preferences are assessed by easy defuzzified scale of TrFN in case of incomplete information.)

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.343-347
• /
• 2008

There are two kind of system in hotel for evaluating management. the first is infra system, for example Front management system - reservation system, C/I, C/O system, POS system , web system, call center management -, Back office system, interface system, and so on which manage direct control for hotel, and next is strategic system, for example BSC , CS . which is supporting hotel management. The purpose of this study was to find using the Balanced Scorecard to evaluate hotel management perfomance. Management performance is based on productivity, quality, time, effect, and responsiveness. Hotel economic value is not equal visual asset which is measured financial value. It is include hotel brand, image, customers who have good loyalty, employees who give customers special service, and systems which was affected by internal process. In conclusion, innovation, growth, internal system process, empioyee and customer have effect hotel performance. Therefore hotel has to know non-financial performance which has positively relate to financial performance.