• Title/Summary/Keyword: 시간-온도 파라미터

Search Result 88, Processing Time 0.043 seconds

Measurement of Setup and Hold Time in a CMOS DFF for a Synchronizer (동기회로 설계를 위한 CMOS DFF의 준비시간과 유지시간 측정)

  • Kim, Kang-Chul
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.10 no.8
    • /
    • pp.883-890
    • /
    • 2015
  • As the semiconductor processing technology has been developing, multiple cores or NoC(network on chip) can be contained in recent chips. GALS(globally asychronous locally synchronous) clocking scheme that has multi-clock domains with different frequencies or phase differences is widely used to solve power consumption and clock skew in a large chip with a single clock. A synchronizer is needed to avoid a synchronization problem between sender and receiver in GALS. In this paper, the setup and hold time of DFF required to design the synchronizer are measured using 180nm CMOS processing parameters depending on temperature, supply voltage, and the size of inverter in DFF. The simulation results based on the bisection method in HSPICE show that the setup and hold time are proportional to temperature, however they are inversely proportional to supply voltage, and negative values are measured for the hold time.

Study on improvement of on-state voltage drop characteristics According to Variation of JFET region of IGBT structure (IGBT 구조의 JFET영역 변화에 따른 온-상태 전압강하 특성 향상을 위한 연구)

  • Ahn, Byoung-Sup;Kang, Ey-Goo
    • Journal of IKEEE
    • /
    • v.22 no.2
    • /
    • pp.339-343
    • /
    • 2018
  • Power semiconductors are semiconductors capable of controlling power over 1W and are mainly used as switches. This power semiconductor device has been developed with the goal of reducing power consumption and high breakdown voltage. This research was analyzed electrical characteristics of IGBT(Insulated Gate Biopolar Transistor) according to diffusion length of JFET region. The Diffusion length of JFET region was controlled by temperature and time using T-CAD simulator. As a result of experiments, we could obtain 1.14V low on state voltage drop by fixing 1440V breakdown voltage.

에미터층의 최적화를 위한 온도와 시간에 따른 면저항 특성분석

  • Kim, Hyeon-Yeop;Choe, Jae-U;Lee, Jun-Sin
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.08a
    • /
    • pp.401-401
    • /
    • 2011
  • 태양전지 제작에 있어서 에미터층의 최적화를 위해 POCl 도핑시 에미터층의 면저항 가변에 중요한 파라미터인 온도와 가스비를 변화하여 실험을 진행하였다. 본 실험에 사용될 최초 기판은 두께가 200${\pm}$5 ${\mu}m$, 비저항이 0.5~0.3 ${\Omega}{\cdot}cm$의 P-type(100) 실리콘 기판을 사용하였으며 먼저 POCl3양과 deposition 시간 그리고 산소와 질소의 양을 고정시키고 온도에 따른 에미터 면저항 변화를 알아보았다. 온도는 830, 840, 850, 860, 870, 880$^{\circ}C$로 가변시켰으며 공정온도가 높아질수록 면저항 값이 낮아짐을 알 수 있었다. 균일도는 낮은 온도에서는 다소 좋지 않았지만 온도가 높아질수록 점차 좋아졌으며 870$^{\circ}C$ 이상에서는 거의 균일한 값을 얻을 수 있었다. 한편, 이번에는 공정온도를 고정하고 산소와 POCl3 가스량의 변화에 따른 면저항 특성과 균일도를 알아보았다. 가스비와 압력 그리고 위치별 면저항 특성에 대해서 알아보았고 부분압이 증가함으로 반응로 내의 O2의 양이 증가함을 알 수 있었다. 증가한 O2는 도핑과정에서 산화막을 더 두껍게 형성하게 하며 높은 면저항 값을 가져오게 하였다. 즉, 충분한 가스량의 주입으로 도핑시 균일도를 향상시킬 수 있었다. 이와 같이 부분압이 증가함에 따라 면저항의 증가와 균일도의 향상을 가져왔다.

  • PDF

A Study on the Parameters for Icing Airworthiness Flight Tests of Surion Military Helicopter (수리온 군용헬기의 결빙 감항인증 비행시험을 위한 파라미터 고찰)

  • Hur, Jang-Wook;Kim, Chan-Dong;Jang, Jae-Sang
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.43 no.6
    • /
    • pp.526-532
    • /
    • 2015
  • In order to relieve limitation of flight operation under icing condition and verify its operation in adverse weather condition for Surion, military helicopter developed in Korea, airworthiness certification in icing condition is required. The process of Surion icing certification should be considered by implementation of four methods by step such as CFD analysis, simulated flight tests, artificial icing flight tests, and natural icing flight tests. For Surion icing flight tests, these are required 20~30 sorties and 20~23 hours in artificial icing condition; 20~30 sorties and 20~22 hours in natural icing condition. In addition, to proceed with efficient flight tests, it is necessary to implement artificial icing flight tests in LWC $0.5{\sim}1.0g/m^3;$ natural icing flight tests in less than LWC $0.5g/m^3$.

THERMAL SIMULATION OF PWM INVERTER (PWM 인버터의 열해석)

  • Kang H.Y.;RYU J.S.;LEE S.W.;KIM Y.G.;SONG J.G.;SHIN Y.J.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2005.10a
    • /
    • pp.35-38
    • /
    • 2005
  • 인버터는 전기적으로 DC(직류)를 AC(교류)로 변환하는 역 변환 장치이며, 상용전원(AC 22V/440V)으로부터 공급된 전력을 입력받아 전압과 주파수를 가변시켜 전동기에 공급함으로써 전동기의 속도를 고효율로 이용하게 제어하는 장치이다. 본 논문에서는 550kW급 IGBT, DIODE의 발열에 의한 인버터 내부의 열 및 온도분포를 ICEPAK 상용코드를 통하여 수치적 해석을 수행하였다. 인버터의 발열은 캐패시터의 수명과 소자들의 오작동 등 많은 열적 문제를 가지고 있으며 Heat-sink, Fan, Duck등을 통하여 전도와 대류가 이루어지는 시스템이다. 인버터은 많은 파라미터들에 의해 온도가 결정되기 때문에 실험을 통한 해석은 제한적 일수 밖에 없다. 따라서 수치해석을 통하여 빠른 시간에 효율적인 열 설계를 할 수 있으며, 인버터의 크기는 최종적으로 Heat-sink의 형상에 따라 달라지므로 이를 최적화 하고 소형화 하는 작업이 필요하다. 인버터의 복잡한 내부구조상 하단부(발열원, Heat-sink, Fan등)만 수치해석을 수행하였을 때와 Full Model과는 $15^{\circ}C$ 온도 차이를 보였다. 최종적으로 인버터의 최적 열 설계를 위하여 Frame위치 변경, Heat-Sink 형상변화등 많은 수치해석을 통하여 만족할 만한 결과를 얻었다.

  • PDF

A Study on the Coolingability of Several Quenchants(I) - Coolingability of Selected Aqueous Solution- (각종 담금제의 냉각성능에 관한 연구 I -물을 주성분으로 한 담금제의 냉각성능 평가-)

  • 민수홍;구본권;김상열
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.3
    • /
    • pp.411-418
    • /
    • 1989
  • Quenching effect depends upon coolingability of quenchant as well as the composition of steel. Study on the coolingability of quenchants is important in cooling process and heat treatment of steel. Experimental apparatus and measuring method follow Korean Industrial Standard. Distilled water, different concentration of NaCl, NaOH and Na$_{2}$CO$_{3}$ solutions were compared. Also the effect of temperature of distilled water were calculated. Experimental results were examined with F.E.M. analysis.

Photo-Induced Graft Copolymerization of Acrylonitrile onto Chitosan (Chitosan에 대한 아크릴로니트릴의 광개시 그라프트 공중합)

  • Kim, Wan-Young;Kim, Chong-Bae;Yug, Gyeong-Chang;Park, Sun-Ny
    • Applied Chemistry for Engineering
    • /
    • v.3 no.1
    • /
    • pp.172-178
    • /
    • 1992
  • The graft copolymerization of acrylonitrile(AN) onto chitosan film by using $F^{3+}(FeCl_3{\cdot}6H_2O)$ as a photosensitizer in an aqueous medium was carried out under ultraviolet(UV) irradiation. The grafted copolymer was identified by using IR spectroscopy and scanning electron microscope. The effects of various polymerization parameters involving monomer concentration, photosensitizer concentration, polymerization time and polymerization temperature were investigated. As monomer concentration and photosensitizer concentration were increased, the percent grafting was increased up to limiting value. And also the percent grafting was found to increase by increasing the polymerization time and temperature.

  • PDF

Interference Temperature based Frequency Sharing Scheme for Multiple Cognitive Radio Users (간섭 온도 기만의 다중 Cognitive Radio 사용자를 위한 주파수 공유 방안)

  • Kim, Seung-Wang;Kim, Hye-Ryeong;Choe, Sang-Ho
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.46 no.12
    • /
    • pp.72-81
    • /
    • 2009
  • In this paper, we investigate a spectrum sharing scheme based on the interference temperature (IT), that is a recently introduced receiver-centric metric by FCC. We extend the existing frequency sharing procedure for single CR to the one for multiple CRs (or secondary users, SUs). In the proposed interference model, we consider the practical operating characteristics of primary users (PUs), stochastically activated (ON)/deactivated (OFF) at the time axis, and analyze quantitatively the CR user capacity based on the model. We define the instantaneous capacity for idle time-slot channel allocation and the mean capacity averaging this instantaneous capacity and use them for a proper frequency sharing. Apart from existing schemes, the proposed frequency sharing scheme changes the frequency parameters adaptively depending on the channel characteristics and does not need any sensing information from PUs. Through computer simulation, we verify the proposed model.

Hydrogen adsorption properties of the large cryosorption pump (대용량 크라이오 펌프의 수소 흡착특성)

  • In S. R.;Kim T. S.
    • Journal of the Korean Vacuum Society
    • /
    • v.14 no.2
    • /
    • pp.69-77
    • /
    • 2005
  • Pumping performance of large cryosorption pumps of different types installed on the 60 $m^3$ test stand for developing and testing ion sources and beam line components of the NBI system was investigated. Hydrogen adsorption and desorption characteristics of the cryosorption panels were analyzed using the temporal change of the hydrogen spectrum obtained with short introduction of the hydrogen gas as cooling the panel, and simulations on the mutual influence between related parameters were also carried out.

DCS-GRAPHIC 설계로 인한 원자력발전소 터빈운전원의 운전능력 향상

  • 박종범;양승권
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1997.10a
    • /
    • pp.401-406
    • /
    • 1997
  • 발전소 기동 및 저출력 운전시 원자력발전소(PWR) 터빈운전원(T/O)들은 증기발생기 수위제어를 위해 배전반(MCR)에 증기발생기 수위제어 관련 경험이 있는 운전원 3명 이상이 좁은 보드앞에서 각자 S/G A, B, C의 주요 파라미터들을 감시하며 수동운전하게 된다. 이렇게 운전원들이 많은 위험부담을 안고 수동운전하는 이유는 증기발생기 수위제어는 증기발생기 내부의 광역수위 측정범위가 약 14.2(m)이고, 주요 제어변수를 측정하는 협역수위는 약 3.2(m)로 매우 적어서 물의 Swell, Shrink 현상과 급수온도의 영향으로 제어하기 매우 어렵기 때문이다. 그러나 DCS(Distributed Control System)내의 한 부분인 공정감시제어를 위한 MMI(Man Machine Interface) Software를 사용하면 한사람이 증기발생기 수위제어 전 계통의 감시 및 제어가 가능하게 된다. 또한 과거나 현재의 변화 추이 및 문제점 분석은 물론, 계통의 결함 발생시 경보가 발생하여 경보발생 화면을 선택할 경우 어느 부분에서 결함이 발생했는지를 보여준다. 만약 이 화면을 운전원이 아닌 현장 Engineer가 보았을 경우는 결함부분의 확인 및 결함카드 보수가 가능하여 운전원들의 작업부담 감소와 이로 인한 다른 계통 점검 시간을 충분히 확보할 수 있다.

  • PDF