• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.21-30
• /
• 2019

Composite pile, which is composed of the steel pipe pile in which the large horizontal force acts and the PHC pile in which the small horizontal force acts by a special connecting devices, is being commercialized as a base material for civil engineering structures. The core of such a composite pile can be said to be a design criterion for estimating the joint position and stability of the connection device between steel pipe pile and PHC pile. In Korea, there is no precise specification for the location of composite pile joints. In the LH Design Department (Korea Land & Housing Corporation, 2009), "Application of composite pile design and review of design book marking" was made with reference to Road Design Practice Volume 3 (Korea Expressway Corporation, 2001). this is used as a basis of the design of the composite pile. It can not be regarded as a section change of the composite pile, so it has a limitation in application. Therefore, In this study, we propose a design criterion for the location of the section of the composite pile (joint of steel pipe pile and PHC pile) and evaluate the stability and economical efficiency of it by using experimental method and analytical method. Analysis of composite pile design data installed in 79 domestic bridges abutment showed that the stresses, bending moments, and displacements acting on the pile body and connection of the pile were analyzed. Through the redesign process, it was confirmed that the stresses generated in the connecting device occur within the allowable stress values of the connecting device and the PHC pile. In conclusion, the design proposal of composite pile joint location through empirical case study in this study is an improved design method considering both stability and economical efficiency in designing composite pile.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2111-2112
• /
• 2006

얼굴 영상에서 사람의 눈을 검출하는 것은 얼굴 인식의 전체적인 성능을 좌우하는 매우 중요한 사항이다. 눈 검출은 얼굴 영상의 특징이 변하기 때문에 항상 신뢰할 수 있는 결과를 얻는 것은 어려우며, 또한 실시간 얼굴 인식에 응용되기 위해서는 빠른 연산 시간도 고려되어야 한다. 본 논문에서는 빠르고 정확한 새로운 눈 검출 방법을 제안하다. 첫째, Ada-Boosting 알고리즘을 사용하여 얼굴 영역을 검출한다. 둘째, Intensity valley와 edge 정보를 사용하여 얼굴 영상의 회전(Rotation in plane)을 보상한다. 셋째, Intensity edge정보를 사용하여 두 눈의 수직, 수평라인을 검출한다. 넷째, 일반적인 (generic) 사람 눈의 패턴을 이용하여 고안된 Filter로 두 눈의 위치를 검출한다. 본 논문을 통하여 새로 제안된 알고리즘에 대한 논의와 실험 결과를 통해 새로운 알고리즘이 눈 검출에 적합함을 제시한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.92-108
• /
• 2017

Present work shows a numerical method to analysis of interaction analysis between solitary wave and onshore bridge. Numerical simulation is carried out by TWOPM-3D (three-dimensional one-field model for immiscible two-phase flows), which is based on Navier-Stokes solver. To do this, the solitary wave is generated numerically in numerical wave channel, and numerical results and experimental results were compared and analyzed in order to verify the applicability of force acting on an onshore bridge. From this, we discussed precisely the characteristics of horizontal and vertical forces (uplift and downward forces) changes including water level and velocity changes due to the variation of solitary wave height, water depth, onshore bridge's location and type, and number of girder. Furthermore, It is revealed that the maximum horizontal and vertical forces acting on the girder bridge show different varying properties according to the number of girder, although each maximum force acting on the girder bridge is proportional to the increasement of incident solitary wave height, and the entrained air in the fluid flow affects the vertical force highly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.373-384
• /
• 2003

The purpose of this study was to evaluate the eruption pattern of a cyst-associated mandibular premolar after marsupialization of a dentigerous cyst in children. The result from the twenty two pairs of normalized panoramic radiographs of twenty two patients who underwent neither extraction nor orthodontic traction of the cyst-associated mandibular after marsupialization were as follows. 1. The eruption speed of a cyst-associated premolar was 3.5 times faster than that of the normal contra-lateral premolar(p<0.05). The angulation change of test group was an average of $2.7^{\circ}$ per month. 2. In the change of the level of root formation, the group which had a little root maturity tended to be faster in the eruption speed(p>0.05) and the R1/4 group had a great change in the angulation change(p>0.05). 3. In the change to be with the cusp position index, the eruption speeds were increased to the 30% deviation groups. But, the eruption speed was decreased above that(p>0.05). 4. Group with cyst diminishment rate of more than $80mm^2$ per month showed the fastest eruption speed of all(p<0.05). 5. The mesial angulated teeth in the test group were decreased more rapidly than the distal angulated teeth in the eruption speed(p>0.05). But, increased in the angulation change(p<0.05). 6. There was a tendency of faster tooth eruption with less deviation of tooth axis. Group with tooth axis deviation of less than $15^{\circ}$ showed the fastest angulation change of all(p<0.05). 7. The eruption speed and the angulation change rapidly decreased during the first 6 months following marsupialization. Based on the results of this study, a cyst-associated mandibular premolar erupted more rapidly after marsupializaton. We thought so that it's prognosis was good if the tooth had a little root maturity, a little devitation and cyst lesion healed faster. We recommend that if there is enough space for eruption, orthodontic traction and surgical treatment of the cyst-associated tooth should be postponed 6 months after marsupialization.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.48-56
• /
• 2023

High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.564-564
• /
• 2012

유역내에서 발생한 고탁수는 저수지로 유입됨으로써 용수 공급에 지장을 초래하고, 수환경 악화 및 하류지역의 정수비용 부담을 가중시키는 등 사회, 경제적으로 여러 가지 문제를 일으키고 있다. 우리나라 대부분의 다목적댐은 홍수기에 탁수로 인하여 다양한 문제를 겪고 있다. 탁수문제는 수중생태계를 파괴하고, 상수원을 오염시키며, 물이 가지는 관광자원으로서의 가치를 심각하게 훼손시키는 등 심각한 문제를 야기 시키고 있다. 특히, 최근에는 잦은 이상 집중강우 현상 때문에 탁수의 장기화 문제가 대두되면서 중요한 사회문제로 떠오르고 있다. 수자원의 효율적 이용을 극대화하기 위한 댐의 연결사업은 탁수의 인위적인 외곡이 발생하기 때문에 적절한 조절을 통해 그 영향을 최소화할 필요가 있다. 댐에서 물의 밀도는 온도, 염도 및 탁도 등의 변화로 인하여 일정하지 않고 시간과 공간에 따라 변화하며, 일반적으로 혼합되지 않고 밀도와 두께가 다른 층에 분리되어 존재한다. 여름철 집중 강우 시 유입되는 고탁수층은 저수지의 밀도성층으로 인하여 표수층 하부에 위치하며, 이를 적기에 배제하지 않을 경우에는 수평방향의 확산현상과 연직방향의 전도현상으로 인해 저수지 전역에 분포하게 되어, 탁수현상의 장기화를 유발한다. 본 연구에서는 EFDC의 댐의 수리 및 수질예측모형을 이용해 여름철 집중강우시 유입되는 고탁수의 도달시간과 탁수량 등을 예측 평가하였다. 댐의 취수탑이 설치되는 위치는 댐의 상류측으로 일반적인 댐 주변의 온도 및 탁수거동과는 다르기 때문에 이 부분을 반영하여 평가하여야 한다. 본 연구에서는 EFDC의 댐 수리 및 수질예측모형을 이용하여 여름철 댐으로 유입되는 탁수거동을 평가하고, 댐 연결터널로 유입되는 취수탑 앞의 탁수농도를 예측하여 적절한 선택취수를 통해 댐 연결로 인한 고탁수의 댐간 이동을 최소화하기 위한 취수설비 운영방안을 제시하였다. 총 6개의 홍수사상('99년 홍수, '02년 루사, '03년 매미, '06년 에위니아, '09년 홍수 등)을 선정하여, 홍수사상에 대한 시단위의 유입량자료를 이용하여 양 댐간 연결로 인한 탁수거동을 분석하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.454-458
• /
• 2005

여름철 집중강우시 유입되는 고탁수층은 저수지의 밀도성층으로 인하여 표수층 하부에 위치하며, 이를 적기에 배제하지 않을 경우에는 수평방향의 확산현상과 연직방향의 전도현상으로 인해 저수지 전역에 분포하게 되어, 탁수현상의 장기화를 유발한다. 일본 사메우라댐의 경우에는 1977년 9월 태풍 17호에 의한 집중호우로 대량의 고탁수가 유입되어 하류하천으로의 댐 방류수의 고탁도현상이 장기간 지속된 바 있다. 이와 같은 탁수장기화에 대한 저수지내 대책의 하나로서 홍수유입후 탁도가 높은 물을 단기간동안 방류하고, 갈수기에는 탁도가 낮은 물을 방류하는 선택취수 개념이 제안된 바 있다. 국내의 임하댐의 경우에도 2002년 태풍 '루사'와 2003년 태풍 '매미'로 인해 발생한 탁수가 전도현상을 거치며 저수지내 전수층에 확산됨으로써 댐방류수의 고탁도현상이 장기화된바 있다. 이로 인하여 댐하류에 위치한 안동시 용상정수장의 동절기 정수처리 장애로 2003년 11월이후 약 160여일동안 댐방류가 중단된 바 있다. 임하댐의 경우에도 탁수장기화에 대한 대책으로서 홍수기 고탁수층을 우선배제한 후, 저수지내에 유입되는 청수을 담수함으로써 이를 방지할 수 있다. 이러한 선택취수 기법은 동일한 수리동역학적 개념을 적용하여 하류하천의 냉해문제를 대비하기 위한 방법으로 표층의 온수를 선택방류하는 데에도 이용될 수 있다. 이와 같은 선택취수를 효율적으로 수행하기 위해서는 취수시설에 접근하는 밀도흐름을 정확하게 이해하고 있어야 한다. 또한 취수탑 인근에서의 온도 및 탁도 등의 연직분포를 실시간으로 파악할 수 있는 자동수질측정시스템이 구축되어 있어야 한다. 현재 임하댐의 경우, 하류하천의 수질을 고려한 효율적인 탁수배제를 위하여 상류 유입부 2개소, 발전취수탑 전면 1개소, 조정지댐 1개소 등 총 4개의 자동수질측정시스템이 설치되어 탁도와 온도가 실시간으로 모니터링되고 있으며, 향후 강우시 저수지에서의 밀도흐름을 보다 정밀하게 모니터링하기 위하여 저수지내 4개의 주요지점에 추가적으로 설치될 예정이다. 이와 같은 자동측정시스템과 더불어 주기적인 세부 수질조사를 실시하면 저수지내의 온도성층 변화와 탁수층 분포를 매우 정확하게 파악할 수 있으며, 호소의 수질모형과 연계하여 강우시 탁수 도달시간과 탁수량을 사전에 예측할 수도 있다. 또한 이와 같은 기초적인 정보를 바탕으로 하류하천의 탁수 피해를 최소화할 수 있는 선택취수탑의 운영방안을 수립할 수 있다 본 연구에서는 이를 위해 선택취수탑 주위의 성층흐름을 기존의 실험자료와 수치해석을 통하여 분석하였고, 온도성층구조나 취수구의 위치변화에 따른 방류수 수질특성을 조사하였다.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.373-389
• /
• 1997

The purpose of this stdudy was to evaluate the effect of maxillary protraction and the relapse of hard and soft tissue after maxillary protraction. For this study 29 patients who were treated with maxillary protractor and labiolingual archwire were selected. Their mean age was 9 years 4 months and mean treatment period was 8.5 months. Lateral cephalograms were taken at pretreatment, immediately after treatment and one to three months after removal of the maxillary protractor. They were traced on skeletodental and soft tissue structures based on Burstone's analysis and analyzed by Quick-Ceph Image Digitizing System(ORTHODONTIC PROCESSING). The mean and standard deviation between pretreatment and posttreatment and between posttreatment and retention period for each cephalometric variable were calculated. Student t-test was used to determine the statistical significance of the changes in each variable. Correlation coefficients between hard tissue and soft tissue were used to determine interrelationship. The results were as follows. 1. After maxillayy protraction, the maxilla and maxillary dentition moved antero-inferiorly, the mandibld and mandibular dentition moved postero-interiorly and palatal plane rotated antero-superiorly by $0.59^{\circ}$. 2. After maxillary protraction, the soft tissue of upper lip moved antero-interiorly with the movement of hard tissue but the antero-posterior position of lower lip was stable in spite of the change of hard tissue. The thickness of upper lip was decreased and that of lower lip was increased after maxillary Protraction. 3. During the retention period, the position of jaws was relatively stable but upper and lower anterior teeth and antero-superiorly rotated palatal plane relapsed to original position. 4. During the retention period, the soft tissue of lips was stable antero-posteriorly and moved mote inferiorly than posttreatment. 5. The correlation coefficients between the postion of upper and lower incisal edge and that position of lips were high, especially in horizontal change.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.411-426
• /
• 2005

The purpose of this study was to investigate the effects of occlusal condition and clenching level on the mandibular torque rotational movement. For this study, healthy 14 men without any symptoms and signs of temporomandibular disorders were selected. Mandibular torque rotational movement was observed in each circumstance of combination of three occlusal conditions such as natural dentition, with wafer of 3.6 mm thickness, and wafer with resin stop of 14 mm thickness total during hard biting of bite stick at maximum voluntary contraction(MVC) and 50% of MVC level of surface EMG activity of masseter muscle. Electromyographic activity and mandibular torque rotational movement were observed using BioEMG and BioEGN in $BioPak^{(R)}$ system. Each biting movement in each circumstance was composed of clenching one time and hard biting of wooden stick two times. The observed items were opening distance, velocity and amount of torque rotational movement in mandibular movement, and the data were statistically processed with $SPSS^{(R)}$ windows (ver.10.0). The results of this study were as follows: 1. There were no differences in the mandibular movement distance between those value in both biting sides, and between those in both clenching forces, but the mandibular velocity showed a different results by clenching force. For the amount of torque rotational movement, there were no difference in the value of the frontal plane but some significant difference was in the value of the horizontal plane by biting side. 2. The mandibular movement distance and the mandibular velocity in both planes were higher by maximum voluntary contraction than those by half maximum voluntary contraction, and amount of torque rotational movement in the horizontal plane was also increased by maximum voluntary contraction. 3. The opening distance in both planes were decreased with the increase of vertical dimension of occlusion, namely, by the occlusal appliances, and this pattern was also showed in the mandibular velocity in case of hard biting by maximum voluntary contraction. However, the amount of torque rotational movement were not different by the increase of vertical dimension of occlusion. 4. The value of angle and distance of the torque rotational movement in the hard biting of wooden stick were generally higher than those in the clenching without wooden stick in both planes without regard to occlusal conditions and/or clenching forces.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.281-286
• /
• 2004

It's important to operate the yard for improving to the productivity in container terminal effectively. Because the automated container terminal(ACT) has storage yard of automation and horizon, it's character is different from conventional terminal. As the automation yard in ACT is operated by the automated equipments, it needs to an efficient storage plan which is connected the automated equipment, the external truck, the shipment etc.. Hut the traditional method of storage plan is the space assignment problem. The efficiency of yard decreases and it is brought about increase of shipment time, because real-time automated equipments and present yard status is not reflected in. In order to solve this problems, we propose the algorithm for real-time storage location of container considering shipment plan, yard status and the state of ATC.